The basic set of PET Blowing Semi automat including the PET blowing semi automat and a rotary preform heater. PET bottles are manufactured from PET-preforms by means of heating them with infrared rays and subsequent blowing by means of compressed air with pressure of 13-15 bar. CHARACTERISTIC (PAV-600) Blowing unit Blowing Semiautomat, l 0.1 - 5.0 Capacity, bottles per hour 600 Preform wall thickness, mm 2,8 - 3,4 Closing mould device knee type mechanism Work parts activator type pneumatic Operation pressure of pneumatic system, bar 0,63 - 0,8 Blowing work pressure, bar 1,3 - 1.5 Air expended, cubic meter per minute 0,9 Power, kW 0,05 Voltage 380 V, 50 Hz Size, mm 1150 x 1510 x 490 Mass, kg 450 Heating unit Line speed of preform transporter m per min. 0,6 - 1,4 Activator type reductor -engine NMRV i =100 Number of transporting heads 35 Tunnel type rotary conveyor Number of heating level 5 Number of heating elements 10 Power, kW 5,5 Voltage 380 V, 50 Hz Size, mm 1164 x 1160 x 482 Mass, kg 220 The equipment produced by our company is distinguished by its simplicity and simultaneous precision of engineering solutions, perfection of design, high quality of fitting, parts produced by world famous manufacturers (FESTO, MITSUBISHI, OMRON, LOVATTO, MOTOVARIO, etc.) with a low cost resulting from mass production. 13500 - 15000 EUR
|