|
|
|
Company Name: |
Shen Zhen Hong Ye Jie Silicone Rubber Technology Co., Ltd. |
| Contact Person: |
Miya |
| City: |
shen zhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers ,special silicon for manual molding ,shoe mold rubber ,pad printing silicon ,silicon oil ,107 base ,DMC etc for plastic toys factories ，With a product line of tens of categories ,we can offer quick copying with precise contraction ratio(up to two thousandth) for mold making to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust.
It is our solemn commitment that :any of our products with quality problems will be replaced within 3 months after purchase ;we offer on –site follow –up service for product demonstration ,free customer service to solve technical training on pad printing silicon usage and rubber head making .What you need is also what we pursue .We are committed to back you up in producing first class products .Customers old and new and distribution and deputization .Let’s join hands and strive for mutual prosperity .
|
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Chemicals/Rubber
|
|
|
|
Offers
From This Member (8) |
|
|
|
[Sell] Liquid Pad Printing Silicone Rubber Material |
 |
|
1. Applications of liquid pad printing silicone rubber
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
2. Features of lqiud pad printing silicone rubber
a. resistance to deformation, high-temperature
b. high printing times
c. good aging resistance
d. exceptional elasticity
e. great printing effect
3. Operation Instructions of lqiud pad printing silicone rubber
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.
Any questions of liquid pad printing silicone rubber, please feel free to contact Mr Ford :
Tel: +86-0755-89212380
Mob: +86-13076981707
Skype: ford1101
Website:http://www(dot)szrl(dot)net
Email:fordhu1988(at)gmail(dot)com
fordhu1988(at)outlook(dot)com |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Medical Grade liquid silicone rubber for shoe insoles |
|
|
Medical Grade liquid silicone rubber for shoe insoles
Application of Medical Grade liquid silicone rubber for shoe insoles
The product is a two component high elongation silicone gel designed for silicone inner bra electronic potting application, this product cured at room temperature to a soft tracky gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection of electronical assemblines from external humidity,mechanical shock and libration.
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Rtv Liquid Moulding Silicone Rubber (for Concrete, PU Resin , Gypsum Casting) |
|
|
1. Application of rtv liquid moulding silicone rubber :
liquid molding casting silicone rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum casting and moulding, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..
4. Operation tips of rtv liquid moulding silicone rubber
a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur.
b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber.
Plus: We have free CD on how to operate for our customers enclosed with product package.
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T, Western Union
Please dont hesitate to ask if you have any questions about rtv liquid moulding silicone rubber , here Mr Ford is at your service:
Tel: +86-0755-89212380
Mob: +86-13076981707
Skype: ford1101
Website:http://www(dot)szrl.net
Email:fordhu1988(at)gmail(dot)com
fordhu1988(at)outlook(dot)com |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Liquid life casting silicone rubber for adult women sex toys making |
|
|
Liquid life casting silicone rubber for adult women sex toys making is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 or 1:1,mainly be suitable for making molds for adult sex toys.
2. Applications - Liquid life casting silicone rubber for adult women sex toys making
Liquid life casting silicone rubber for adult women sex toys making could be mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc
3. Instruction- Liquid life casting silicone rubber for adult women sex toys making
Liquid life casting silicone rubber for adult women sex toys making are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts.
4. Features- Liquid life casting silicone rubber for adult women sex toys making
high tensile & tear strength
(2) Low linear shrinkage
(3)free Curing agent
(4)brushing & pouring
(5) high duplication times
pls feel free to contact Mr Ford:
Tel: +86-0755-89212380
Mob: +86-13076981707
Skype: ford1101
Website:http://www(dot)szrl.net
Email:fordhu1988(at)gmail(dot)com
fordhu1988(at)outlook(dot)com |
|
| » Chemicals/Rubber |
|
|
|
[Sell] RTV silicone rubber for artificial stone molding |
|
|
1. RTV Silicone Rubber for Artificial Stone Molding- Description:
E-640 is very suitable for making silicone rubber stone molds. It is featured with extremely low shrinkage, good fluidity and resistance to many kinds of chemicals; This material do not release any by-product with low molecular weight during its curing process, and it's cured from top to bottom and from the inside and outside simultaneously, namely, deep curing. The E sereise platinum cured silicone will not have the problem of degradation, sticky mold surface caused by the existence of by-product of small molecules under certain conditions, (such as closed environment, high temperature). Known from our customer's feedback, it is very convenient to make cement molds, and it is a high-quality silicone for construction industries. Further more, it can be applied to make multiple piece molds for products with complex design.
2. RTV Silicone Rubber for Artificial Stone Molding- Advantage:
E-640 is also featured with low shrinkage and nearly nil viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously. It is suitable for the products with medium size or big size.
For more information of RTV Silicone Rubber for Artificial Stone Molding , pls feel free to contact Mr Ford:
Tel: +86-0755-89212380
Mob: +86-13076981707
Skype: ford1101
Website:http://www(dot)szrl.net
Email:fordhu1988(at)gmail(dot)com
fordhu1988(at)outlook(dot)com |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Addition cure silicone rubber |
|
|
Brief description：
Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making, medical catheter and so on. It is nontoxic and with very low shrinkage.
Addition cure silicone rubber applications:
Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making, life casting, medical catheter and so on.
Addition cure silicone rubber features:
A. Two-component silicone rubber with platinum catalyst
B. With high transparency, tensile strength, and tear strength.
C. Nontoxic & reach to Food grade
D. With good heat stability and weatherability ( temperatureresistant range of -60—250 C)
E. With heat-ageing resistance
For more information , pls feel free to contact Mr Ford:
Shen Zhen Hong Ye Jie Technology Co.,Ltd
Tel: +86-0755-89212380
Mob: +86-13076981707
Skype: ford1101
Website:www(dot)szrl(dot)net
Email:fordhu1988(at)gmail(dot)com
fordhu1988(at)outlook(dot)com
Welcome to our website www dot szrl dot net
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] pad printing silicone rubber |
|
|
pad printing silicone rubber
Detailed Product Description
1.The application of pad printing silicone rubber:
Pad printing silicone rubber with high printing times and abrasion,resistence,without any inpurites,with good printing effects
2.The usage of pad printing silicone rubber:
Pad printing silicone rubber is used for making the printing pads for plastic toys, craftworks, product printing.
3.The description of pad printing silicone rubber:
The pad printing silicone rubber has the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.
The pad printing silicone rubber is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing.
The pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.
For more information , pls feel free to contact Mr Ford:
Shen Zhen Hong Ye Jie Technology Co.,Ltd
Tel: +86-0755-89212380
Mob: +86-13076981707
Skype: ford1101
Website:www(dot)szrl(dot)net
Email:fordhu1988(at)gmail(dot)com
fordhu1988(at)outlook(dot)com
Welcome to our website www dot szrl dot net
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] RTV silicone rubber |
|
|
RTV silicone rubber
1. Applications of RTV-2 mold making silicone rubber
RTV-2 Silicone rubber mold making silicone rubbe is primarily intended for:
a. poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts,
b. lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
c. a large statue Buddha, statues Buddha, artifacts copied,
d. furniture, furniture decorative materials, building decoration materials, large-scale cement mold,
e. artificial fossils Factory, Europe component factory,
f. simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
2. Features of rtv2 mold making silicone rubber
a. low viscosity, exceptional fluidity and easy operation
b. resistance to deformation, high-temperature
c. acid, alkali and ageing-resistance
d. low shrinkage
e. good tensile strength
f. high reproduction times
3.Technical datasheet of RTV-2 mold making silicone rubber
Appearance: Yellow, red, green, white
Viscosity(cp): 16000-22000
Hardness(A): 23-28
Tensile strength(Mpa) ≥3.2
Tear-strength (kn/m) ≥18
Elongation break: (%)≥380
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
4. Operation tips of RTV-2 mold making silicone rubber
a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur.
b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber.
Plus: We have free CD on how to operate for our customers enclosed with product package.
For more information , pls feel free to contact Mr Ford:
Shen Zhen Hong Ye Jie Technology Co.,Ltd
Tel: +86-0755-89212380
Mob: +86-13076981707
Skype: ford1101
Website:www(dot)szrl(dot)net
Email:fordhu1988(at)gmail(dot)com
fordhu1988(at)outlook(dot)com
|
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
