|
|
|
Company Name: |
SuZhou Volsun Electronics Technology CO.,LTD |
| Contact Person: |
Joe |
| City: |
Suzhou |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
When it comes to insulation, sealing, protection or identification solutions in electronic, electric power, automotive, aerospace, rail transit industries etc., Suzhou Volsun Electronics has a great say. No matter what material based products you are looking for in the industry PE, Teflon, silicone rubber, PVDF, PVC, EPDM, fluoro-plastic or fluororubber, we, Volsun Electronics, with our brilliant knowledge and experience in these a |
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Agriculture & Farm/Fruits
|
|
|
|
Offers
From This Member (9) |
|
|
|
[Sell] Cable heat shrinkable end cap -SA |
 |
|
| Cable heat shrinkable end cap -SA Description Cable heat shrinkable end cap -SA, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc. Structure Dimension Size(mm) As Supplied ID(mm) Length (10%) Length of Adhesive (10%) Size after shrink (10%) ID(mm) Wall thickness W (10%) Standard Type 12/4 12.0 40 15 4.0 2.6 14/5 14.0 45 18 5.0 2.2 20/6 20.0 55 25 6.0 2.8 25/8.5 25.0 68 30 8.5 2.8 35/16 35.0 83 35 16.0 3.3 40/15 40.0 90 40 16.0 3.3 55/26 55.0 103 50 26.0 3.5 75/36 75.0 120 55 36.0 4.0 100/52 100 140 70 52.0 4.0 120/60 120 150 70 60.0 4.0 145/60 145 150 70 60.0 4.0 160/82 160 150 70 82.0 4.2 200/90 200 160 70 90.0 4.2 Standard Type 14/5 14.0 55 30 5.0 2.2 42/15 42.0 110 40 15.0 3.3 55/23 55.0 140 70 23.0 3.8 |
|
| » Chemicals/Pest Control |
|
|
|
[Sell] Cable heat shrinkable end cap -SA |
|
|
| Cable heat shrinkable end cap -SA Description Cable heat shrinkable end cap -SA, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc. Structure Dimension Size(mm) As Supplied ID(mm) Length (10%) Length of Adhesive (10%) Size after shrink (10%) ID(mm) Wall thickness W (10%) Standard Type 12/4 12.0 40 15 4.0 2.6 14/5 14.0 45 18 5.0 2.2 20/6 20.0 55 25 6.0 2.8 25/8.5 25.0 68 30 8.5 2.8 35/16 35.0 83 35 16.0 3.3 40/15 40.0 90 40 16.0 3.3 55/26 55.0 103 50 26.0 3.5 75/36 75.0 120 55 36.0 4.0 100/52 100 140 70 52.0 4.0 120/60 120 150 70 60.0 4.0 145/60 145 150 70 60.0 4.0 160/82 160 150 70 82.0 4.2 200/90 200 160 70 90.0 4.2 Standard Type 14/5 14.0 55 30 5.0 2.2 42/15 42.0 110 40 15.0 3.3 55/23 55.0 140 70 23.0 3.8 |
|
| » Chemicals/Pest Control |
|
|
|
[Sell] 25mm heat shrink tube for paddle -SA |
|
|
| 25mm heat shrink tube for paddle -SA Description Volsun 25mm heat shrink tube for paddle is made of irradiation cross-linked polymer alloy, followed by a surface treatment. This products typically used for non-slip, non-skid decorative purpose for handles and grips on high grade fishing tackle, sport equipment, fitness equipment, daily supplies, various tools, kitchenware etc.. Features Flexible, fast shrinking Non slip, nice-looking, user-friendly Min shrink temperature:60 Min full recovery temperature:105C Continuous operating temperature:-55C ~110C Shrink ratios:2:1 RoHS compliant Standard color: Black, Red, Yellow, Green, Blue Technical Data Property Typical Data Test Method Tensile strength 10.4MPa ASTM D 2671 Elongation 200% ASTM D 2671 Longitudinal change -8%+8% ASTM D 2671 Dimension Size(mm) As supplied (mm) Recovered(mm) Standard (m/pc) Inner diameter Wall thickness Internal diameter Wall thickness 15 15 0.450.15 8 0.850.15 1.0 20 20 0.500.15 11 0.900.15 0.8/1.0/1.6 22 22 0.500.15 12.5 0.900.15 0.8/1.0/1.6 25 25 0.500.15 14.5 1.000.15 0.8/1.0/1.6 28 28 0.500.15 15.5 1.000.15 0.8/1.0/1.6 30 30 0.600.15 17.5 1.200.15 0.8/1.0/1.6 35 35 0.600.15 20.0 1.200.15 0.8/1.0/1.6 40 40 0.600.15 23.0 1.200.15 0.8/1.0/1.6 45 45 0.650.15 25.0 1.250.15 0.8/1.0/1.6 50 50 0.650.15 28.0 1.250.15 0.8/ |
|
| » Chemicals/Pest Control |
|
|
|
[Sell] Cold Shrink EPDM Tubes-SO |
|
|
| a series of open-ended, tubular rubber sleeves, which are factoryexpanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. Thecore is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing theube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides orsulphurs. diameter sizes will cover a range of 1000 volt cables, copper and aluminum conductors. Excellent weather resistance, ultraviolet aging resistance and higher embrittlement resistance than heat shrink tubing Simultaneously expands and shrinks with workpieces without clearances, seals tight in harsh environment Well suited for cable less than 1KV Simple , safe installation, requires no tools or special training. No torches or heat work required. 50% Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splices rated to 1000volts irectly buriable or submersible Physical protection and moisture sealing for high-voltage, air-insulated connectors and lugs such as spacer cable andlug connections to bus bar Relocation of service , sInsulation of inline conductor transition connectors Technical Data Anti-enzyme (bacteria) UV irradiation for 2000 hours without aging ASTM G-53 Dimensions |
|
| » Chemicals/Pest Control |
|
|
|
[Sell] Cable heat shrinkable end cap -SA |
|
|
| Cable heat shrinkable end cap -SA Description Cable heat shrinkable end cap -SA, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc. Structure Dimension Size(mm) As Supplied ID(mm) Length (10%) Length of Adhesive (10%) Size after shrink (10%) ID(mm) Wall thickness W (10%) Standard Type 12/4 12.0 40 15 4.0 2.6 14/5 14.0 45 18 5.0 2.2 20/6 20.0 55 25 6.0 2.8 25/8.5 25.0 68 30 8.5 2.8 35/16 35.0 83 35 16.0 3.3 40/15 40.0 90 40 16.0 3.3 55/26 55.0 103 50 26.0 3.5 75/36 75.0 120 55 36.0 4.0 100/52 100 140 70 52.0 4.0 120/60 120 150 70 60.0 4.0 145/60 145 150 70 60.0 4.0 160/82 160 150 70 82.0 4.2 200/90 200 160 70 90.0 4.2 Standard Type 14/5 14.0 55 30 5.0 2.2 42/15 42.0 110 40 15.0 3.3 55/23 55.0 140 70 23.0 3.8 |
|
| » Chemicals/Pest Control |
|
|
|
[Sell] Heat shrinkable Cable Cap-SA |
|
|
| Heat shrinkable Cable Cap -SA Description Heat shrinkable Cable Cap -SA, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc. Structure Dimension Size(mm) As Supplied ID(mm) Length (10%) Length of Adhesive (10%) Size after shrink (10%) ID(mm) Wall thickness W (10%) Standard Type 12/4 12.0 40 15 4.0 2.6 14/5 14.0 45 18 5.0 2.2 20/6 20.0 55 25 6.0 2.8 25/8.5 25.0 68 30 8.5 2.8 35/16 35.0 83 35 16.0 3.3 40/15 40.0 90 40 16.0 3.3 55/26 55.0 103 50 26.0 3.5 75/36 75.0 120 55 36.0 4.0 100/52 100 140 70 52.0 4.0 120/60 120 150 70 60.0 4.0 145/60 145 150 70 60.0 4.0 160/82 160 150 70 82.0 4.2 200/90 200 160 70 90.0 4.2 Standard Type 14/5 14.0 55 30 5.0 2.2 42/15 42.0 110 40 15.0 3.3 55/23 55.0 140 70 23.0 3.8 62/23 |
|
| » Chemicals/Pest Control |
|
|
|
[Sell] Glue-lined Cable Terminal Cap -SA |
|
|
| Glue-lined Cable Terminal Cap -SA Description Glue-lined cable terminal cap with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc. Structure Dimension Size(mm) As Supplied ID(mm) Length (10%) Length of Adhesive (10%) Size after shrink (10%) ID(mm) Wall thickness W (10%) Standard Type 12/4 12.0 40 15 4.0 2.6 14/5 14.0 45 18 5.0 2.2 20/6 20.0 55 25 6.0 2.8 25/8.5 25.0 68 30 8.5 2.8 35/16 35.0 83 35 16.0 3.3 40/15 40.0 90 40 16.0 3.3 55/26 55.0 103 50 26.0 3.5 75/36 75.0 120 55 36.0 4.0 100/52 100 140 70 52.0 4.0 120/60 120 150 70 60.0 4.0 145/60 145 150 70 60.0 4.0 160/82 160 150 70 82.0 4.2 200/90 200 160 70 90.0 4.2 Standard Type 14/5 14.0 55 30 5.0 2.2 42/15 42.0 110 40 15.0 3.3 55/23 55.0 140 70 23.0 3.8 |
|
| » Chemicals/Pest Control |
|
|
|
[Sell] Yellow Environment Friendly Heat Shrink Tubing |
|
|
| Environment Friendly Heat Shrink Tubing Description DBRS-105(125)H(2X)NF Environment Friendly Heat Shrink Tubing is made of radiation cross-linked polyolefin, carries excellent physicochemical and electrical properties. Typical applications include insulation of electrical connections or wire splices, rust and corrosion resistance for soldered joints or connections, mechanical and wiring harness protection and insulation. This product is widely used in automotive, agricultural and household machinery with bent tubing where mechanical protection is required, electronics, life consumables, decoration and lighting, communications, ship, aircraft manufacturing and other fields. Features Meets UL 224, CAN / CSA C22.2 NO198.1 -99 Heat shrink ratio : 2:1 Flexible, non flame retardant, bright outer layer Shrink Temperature:70C~105C (DBRS-105H(2X)NF) 84C~120C (DBRS-125H(2X)NF) Continuous operating temperature: -55C~105C (DBRS-105H(2X)NF) -55C~125C (DBRS-125H(2X)NF) Environmental standards: RoHS , IPC/JEDEC-J-STD-709 Class H material Standard colors : clear ,black .More colors are available upon request. Technical Performance Structure Dimensions (2:1) Note: Non-standard dimensions and packages also available on your request |
|
| » Chemicals/Pest Control |
|
|
|
[Sell] Decorative nonslip heat shrink sleeve -SA |
|
|
| Decorative nonslip heat shrink sleeve -SA Description Decorative nonslip heat shrink sleeve is made of irradiation cross-linked polymer alloy, followed by a surface treatment. This products typically used for non-slip, non-skid decorative purpose for handles and grips on high grade fishing tackle, sport equipment, fitness equipment, daily supplies, various tools, kitchenware etc.. Technical Data Property Typical Data Test Method Tensile strength 10.4MPa ASTM D 2671 Elongation 200% ASTM D 2671 Longitudinal change -8%+8% ASTM D 2671 Dimension Size(mm) As supplied (mm) Recovered(mm) Standard (m/pc) Inner diameter Wall thickness Internal diameter Wall thickness 15 15 0.450.15 8 0.850.15 1.0 20 20 0.500.15 11 0.900.15 0.8/1.0/1.6 22 22 0.500.15 12.5 0.900.15 0.8/1.0/1.6 25 25 0.500.15 14.5 1.000.15 0.8/1.0/1.6 28 28 0.500.15 15.5 1.000.15 0.8/1.0/1.6 30 30 0.600.15 17.5 1.200.15 0.8/1.0/1.6 35 35 0.600.15 20.0 1.200.15 0.8/1.0/1.6 40 40 0.600.15 23.0 1.200.15 0.8/1.0/1.6 45 45 0.650.15 25.0 1.250.15 0.8/1.0/1.6 50 50 0.650.15 28.0 1.250.15 0.8/1.0 Note: Non-standard dimensions and packages also available on your request Features Flexible, fast shrinking Non slip, nice-looking, user-friendly Min shrink temperature:60 Min full recovery temperature:105C Continuous operating temperature:-55C ~110C |
|
| » Chemicals/Pest Control |
|
|
|
|
|
Pages: 1
|
|
|
|
|
