|
[Sell] Stearic Acid |
|
|
Stearic Acid - SP Single Pressed Specification: Colour White – Faintly Yellow Appearance Small Flakes Formula C17 H 35 COOH Iodine Value 6.0 – 9.0 Molecular Weight 284.47 Melting Point 56º - 57ºC Specific Gravity 0.86 Colour Red 51/4” Lovi Bond 0.5-1.0 Acid Value 206-209 Sponification Value 207 – 210 Packing 25 Kg/Bag Applications: Stearic Acid – SP is used in the following industries: i. Candles Industry ii. Tyre & Rubber Industry iii. Lubricating Greases Industry
Stearic Acid - DP Double Pressed Specification: Colour White Appearance Small Flakes Formula C17 H 35 COOH Iodine Value 3.0 – 6.0 Molecular Weight 284.47 Melting Point 56º - 57ºC Specific Gravity 0.86 Colour Red 51/4” Lovi Bond 0.5-1.0 Acid Value 206-209 Sponification Value 207 – 210 Packing 25 Kg/Bag Applications: i. Tyre & Rubber Industry ii. PVC Industry iii. Candle Industry iv. Water Proofing Industry v. Pharmaceutical Industry vi. Commercial & Military Explosive Industry vii. Lubricating Greases Industry
STEARIC ACID - TPS TRIPPLE PRESSED SPECIAL Specification: Colour White Appearance Small Flakes Formula C17 H 35 COOH Iodine Value Less than one Molecular Weight 284.47 Melting Point 65º - 70ºC Specific Gravity 0.86 Colour Red 51/4” Lovi Bond 0.5-1.0 Acid Value 206-209 Sponification Value 207 – 210 Packing 25 Kg/Bag Applications: i. Pharmaceutical Industry ii. Cosmetic Industry iii. Textile Industry (Fabric softener) iv. Manufacturing of Stearates
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Carbon Black |
|
|
Re: Carbon Black N220 Appearance: Black powder or granular Specification: Iodine Absorption Number (g/Kg) : 121+/-5 DBP Absorption number (10-5M3/Kg) : 114+/-5 DPB Absprption Value of compressing sample (10-5M3/Kg): 93-107 CATB Surface Area (103M2/Kg) : 106-116 Nitrogen Surface Area (103M2/Kg): 114-124 Tinting Strength : 110-120% Heating Loss: 3.0 max Ash : 0.5% max Tensile Strength: -0.8 MPa min Extension%: 10Min Map Modulus at 300%: -2.5+/-1.3 Packing: 25kg/bag, 16MT/ 20’FCL Re: Carbon Black N330 Appearance: Black powder or granular Specification: Iodine Absorption Number (g/Kg) : 82+/-5 DBP Absorption number (10-5M3/Kg) : 102+/-5 DPB Absprption Value of compressing sample (10-5M3/Kg): 81-95 CATB Surface Area (103M2/Kg) : 79-87 Nitrogen Surface Area (103M2/Kg): 78-88 Tinting Strength : 98-108% Heating Loss: 2.5 max Ash : 0.5% max Tensile Strength: -1.5 MPa min Extension%: -10Min Map Modulus at 300%: -1.7+/-1.3 Packing: 25kg/bag, 16MT/ 20’FCL Re: Carbon Black N550 Appearance: Black powder or granular Specification: Iodine Absorption Number (g/Kg) : 43+/-4 DBP Absorption number (10-5M3/Kg) : 121+/-5 DPB Absprption Value of compressing sample (10-5M3/Kg): 81-95 CATB Surface Area (103M2/Kg) : 38-46 Nitrogen Surface Area (103M2/Kg): 38-46 Heating Loss: 2.5 max Ash : 0.5% max Tensile Strength: -3.5 MPa min Extension%: -10Min Map Modulus at 300%: -1.7+/-1.3 Packing: 25kg/bag, 16MT/ 20’FCL Re: Carbon Black N660 Appearance: Black powder or granular Specification: Iodine Absorption Number (g/Kg) : 36+/-4 DBP Absorption number (10-5M3/Kg) : 90+/-5 DPB Absprption Value of compressing sample (10-5M3/Kg): 68-82 CATB Surface Area (103M2/Kg) : 31-39 Nitrogen Surface Area (103M2/Kg): 30-40 Heating Loss: 1.5 max Ash : 0.5% max Tensile Strength: -3.5 MPa min Extension%: +10Min Map Modulus at 300%: -3.5+/-1.3 Packing: 25kg/bag, 16MT/ 20’FCL
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Sodium Tripolyphosphate |
|
|
Sodium Tripolyphosphate(STPP) Industrial Grade Specification: Na5P3O10: 94.0%Min P2 O 5: 57.0%Min Water Insoluble Matter: 15%Max Iron(Fe): 0.015%Max PH value (1% water solution): 9.2-10.0 Whiteness: 92%Min Ignition loss: 1.0 density (g/cm3): 0.35-0.9 Phase I: 10-30 Packing: 25kg/bag, 20MT/20’FCL Sodium Tripolyphosphate(STPP) Food Grade Specification: Na5P3O10 94.0%Min P2 O 5 57.0%Min Water Insoluble Matter 0.04%Max Iron(Fe) 0.006%Max PH value (1% water solution) 9.5-10.0 Heavy Metal (as Pb) 0.001%Max Arsenic (As) 0.0003%Max Fluoride (F) 0.003%Max Whiteness 92%Min density (g/cm3) 0.35-0.9 Phase I 10-30 Packing: 25kg/bag, 20MT/20FCL
|
|
» Chemicals/Other |
|
|
|
[Sell] Soda Ash |
|
|
Re: Soda Ash Light Specifications: Total base content (as Na2CO3, on dry base): Min. 99.2 % Chlorides (as NaCL, on dry base): Max. 0.70% Iron (as Fe, on dry base): Max. 0.035% Insolubles in water: Max. 0.03% Loss on ignition: Max. 0.80% Fineness (180um): Min. 75.0% Package: In 25kg bag, 20MT/20FCL.. Appearance: White powder or fine crystals. Packing: 25kgs net bag, 20mts in the 20'FCL Usage: Soda is an important chemical substance of white power or fine grains, which is easily soluble in water, it is used as a raw material in the production of bulding glass, soap, papers and as a cleaning agent; For blesching, and in the treatment of water. Re: Soda Ash Dense Specifications: Appearance: White crystal powder Total Alkalinity(as Na2CO3 in dry base) ≥%: 99.5 Chloride Content(as NaCl) ≤%: 0.70 Iron Content(as Fe in dry base) ≤%: 0.0035 Sulphate Content(as SO4 in dry base) ≤%: 0.03 Water Insoluble Matter ≤%: 0.03 Bulk Density /g/mL ≥: 0.90 Granularity UP 180mM % ≥: 70.0 Packing: 50kg/1000kg pp woven bag Application: Mainly used in manufacturing of glass shell of kinescope and optic glass and float glass.
|
|
» Chemicals/Other |
|
|
|
[Sell] Caustic Soda |
|
|
Re: Caustic Soda 99%Min Flakes Specification Molecular Formular: NaOH Specification: NaOH: 99% Min. Na2CO3: 0.7%Max. NaCl: 0.1% Max. Fe2O3: 0.005% Max. Packing: 25kg pp bags, 25MT/FCL. Re: Caustic Soda 96%Min Flakes Specification Molecular Formular: NaOH Specification: NaOH 96% Min. Na2CO3 1.3%Max. NaCl 2.7% Max. Fe2O3 0.008% Max. Packing: 25kg pp bags, 25MT/FCL.
|
|
» Chemicals/Other |
|
|
|
[Sell] Iron Oxide |
|
|
Re: Iron Oxide Red Y101/110/120/130 Appearance: Red Power Specification: Content: 96% Moisture: 1.0% PH Value: 3.5-8 Oil Absorption: 15-25 Water-soluble Matter: 0.3% 45UM Sieve Residue: 0.2% Tinting strength : 95-105% Density approx: 5.0-5.1 cm3 Packing: 25kg/bag, 23MT/20’FCL Re: Iron Oxide Red Y190 Appearance: Red Power Specification: Content: 95% Moisture: 1.0% Water-soluble Matter: 0.3% 45UM Sieve Residue: 0.2% PH Value: 3.5-8 Oil Absorption: 15-25 Tinting strength : 95-105% Density approx: 5.0-5.1 cm3 Packing: 25kg/bag, 23MT/20’FCL Re: Iron Oxide Yellow Y311/313 Appearance: Yellow Power Specification: Content: 86% Moisture: 1.0% Water-soluble Matter: 0.3% 45UM Sieve Residue: 0.3% PH Value: 3.5-7 Oil Absorption: 25-35 Tinting strength : 95-105% Density approx: 4.0-4.3 cm3 Packing: 25kg/bag, 13MT/20’FCL Iron oxide Brown 610 Appearance: Brown powder Specification: Content: 92% Moisture: 1.0% Water-soluble Matter: 0.5% 45UM Sieve Residue: 0.3% PH Value: 4-7 Oil Absorption: 20-30 Tinting strength : 95-105% Density approx: 4.8 cm3 Iron oxide Black 772 Appearance: Black powder Specification: Content: 93% Moisture: 1.0% Water-soluble Matter: 0.5% 45UM Sieve Residue: 0.3% PH Value: 5-8 Oil Absorption: 15-25 Tinting strength : 95-105% Density approx: 4.5-5.0 cm3 Iron oxide blue F100 Appearance: blue powder Specification: Moisture: 1.0% Water-soluble Matter: 0.5% 45UM Sieve Residue: 0.3% Tinting strength : 95-105%
|
|
» Chemicals/Paint & Pigments |
|
|
|
[Sell] Zinc Oxide |
|
|
Re: Zinc Oxide 99%Tech grade Appearance: White powder Specification: ZnO: 99% min MnO: 0.001% max PbO: 0.15% max CuO: 0.001% max Heat Loss: 0.3% max HCL Insoluble Matter: 0.01% max Water soluble matter: 0.1% max 45um Sieve Residue: 0.15% max Packing: 25kg/bag, 20MT/20FCL Re: Zinc Oxide 99.5%Tech grade Appearance: White powder Specification: ZnO: 99.5% min MnO: 0.0005% max PbO: 0.05% max CuO: 0.0005% max Heat Loss: 0.3% max HCL Insoluble Matter: 0.01% max Water soluble matter: 0.1% max 45um Sieve Residue: 0.15% max Packing: 25kg/bag, 20MT/20FCL Re: Zinc Oxide 99.7%Tech grade Appearance: White powder Specification: ZnO: 99.7% min MnO: 0.0004% max PbO: 0.037% max CuO: 0.0004% max Heat Loss: 0.3% max HCL Insoluble Matter: 0.01% max Water soluble matter: 0.1% max 45um Sieve Residue: 0.15% max Packing: 25kg/bag, 20MT/20FCL
|
|
» Chemicals/Paint & Pigments |
|
|
|
[Sell] Rubber Accelerators |
|
|
Re: Rubber Accelerators M Appearance: Light-Yellow powder Specification : Melting Point: 170.0 ℃min Ash: 0.3% max Heating Reduction : 0.5 max 150 mesh screen residues :0.1% max Re: Rubber Accelerators D Appearance: White powder Melting Point :144℃ min Ash : 0.30% max Heating Reduction : 0.30 max 150 mesh screen residues: 0.10% max Re: Rubber Accelerators DM Appearance: White or light yellow powder or bead Melting Point: 165.0 ℃ min Ash: 0.5 % max Heating Reduction: 0.04 max 150 mesh screen residues: 0.1% max Re: Rubber Accelerators TMTD Appearance: White, hoary powder Melting Point: 140.0℃ min Ash : 0.5% max Heating Reduction: 0.04 max 150 mesh screen residues: 0.1% max
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Antioxidant for rubber |
|
|
Re: Antioxidant for rubber RD Specification: Appearance: amber to light drown ships grains Softening point℃ :80-100 Loss weight after heating: 0.5% max Ash content : 0.5% max Re: Antioxidant for rubber 4010NA Specification: Appearance:grayish purpie to dark pieces or gains Purity: 92.0% min Initial boiling point of dry product/℃: 70% min Heating loss: 0.50% max Ash content: 0.30% max
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Chrome Oxide Green |
|
|
Re: Chrome Oxide Green XY-01 Appearance: light to dark green powder Specs: Cr2O3 99% min. , Moisture: 0.3% max. Water soluble matter: 0.4% max. Residue (325 mesh): 0.3% max. Packing: in PP & PE woven bag of 25kg or 1000kg each Re: Chrome Oxide Green XY-02 Appearance: light to dark green powder Specs: Cr2O3 99% min. , Moisture: 0.2% max. Water soluble matter: 0.4% max. Residue (325 mesh): 0.3% max. Heat Stability: 1200℃ Packing: in PP & PE woven bag of 25kg or 1000kg each
|
|
» Chemicals/Organics |
|
|
|
[Sell] Formic acid |
|
|
Re: Formic acid 90% Appearance: Colourless liquid Specification: Purity: 90% min Colour Index Platinium Cobalt: 10 max Sulphate as SO4: 0.001% max CL: 0.003% max Fe: 0.0001% max Evaporation Residue: 0.006% max Packing: 225kg /plastic drum Re: Formic acid 85% Appearance: Colourless liquid Specification: Purity: 85% min Colour Index Platinium Cobalt: 20 max Sulphate as SO4: 0.002% max CL: 0.005% max Fe: 0.0005% max Evaporation Residue: 0.02% max Packing: 225kg /plastic drum Other package: In 25kg plastic drum. In 35kg plastic drum In 250kg plastic drum In 1200kg IBC ContainerFirstacking: 25kg/250kg plastic drum
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Glacial Acetic Acid |
|
|
Glacial Acetic Acid 99.5% Tech grade Appearance: Colorless transparent liquid Purity: 99.5% min Sp. Gr. (20/4C)g/cm: 31.049-1.056 Freezing Point: 16C Sulfates: 0.0005% max Chloride: 0.0004% max Residue on evaporation: 0.02% max Heavy metals(Pb): 0.0002% max Iron(Fe): 0.0001% max Glacial Acetic Acid 99%Tech grade Appearance: Colorless transparent liquid Purity: 99% min Acetaldehyde: 0.05% max Formic acid: 0.003% max Iron: 0.0002% max Residue on evaporation: 0.02% max Heavy metals(Pb): 0.0002% max
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Sodium Hexametaphosphate |
|
|
Re: Sodium Hexametaphosphate tech grade Appearance: White power Specification: Total phosphate as P2O5: 68% min Inactive phosphate as P2O5 : 7.5% max Iron: 0.05% max PH value(1% solution) : 5.8-7.3 Water insoluble: 0.05% max Packing: 25kg/bag, 22MT/20FCL
|
|
» Chemicals/Paint & Pigments |
|
|
|
[Sell] Aluminum Sulphate |
|
|
Re: Aluminum Sulphate Appearance : White lumps/granules/ powder Specification: Al2O3: 15.8% min Fe: 0.45% max PH value: 3.0 min Water-insoluble Matter: 0.15% max As: 0.0005% max Pb: 0.002% max Grain size:15mm max(flake) Packing: 25/50kg/bag, 25MT/20’FCL Re: Aluminium sulphate Appearance : White lumps/granules/ power Specification: Al2O3: 16% min Fe: 0.4% max PH value: 3.0 min Water-insoluble Matter: 0.15% max As: 0.0005% max Pb: 0.002% max Grain size:15mm max(flake) Packing: 25/50kg/bag, 25MT/20’FCL Re: Aluminium sulphate Non Ferric Appearance : White lumps/granules/ power Specification: Al2O3: 17% min Iron: 0.01% PH value: 2.6 Water-insoluble : 0.5% max Grain size:15mm max(flake)
|
|
» Chemicals/Other |
|
|
|
[Sell] Calcium Chloride |
|
|
Re: Calcium Chloride Anhy Appearance: White flake or blocks or granular or power Specification: 94% min Magnesium & alkali metal chloride : 5.5% max Water-insoluble Matter: 0.1% max Sulphate: 0.1% max Alkalinity: 0.2% max Packing: 25kg/bag, 25MT/20’FCL Re: Calcium Chloride Dihy Appearance: White flake or blocks or granular or power Specification: 74% min Magnesium & alkali metal chloride : 2.5% max Water-insoluble Matter: 0.1% max Sulphate: 0.1% max Alkalinity: 0.2% max Packing: 25kg/bag, 25MT/20’FCL
|
|
» Chemicals/Other |
|
|
|
[Sell] Lithopone |
|
|
Re: Lithopone B301 Appearance: White power Specifications: Total of Zinc and BaSO4 (as ZnS): 99%min Total Zinc (as ZnS): 28-30%min Volatile matters at 105 C: 0.3%max Zinc oxide: 0.6%max Soluble matters in water: 0.4%max Screen residues (63um mesh): 0.1%max Oil absorption (g/100g): 14%max Color killing (Compare with standard): 105%min Re: Lithopone B302 Appearance: White power Specification: Sum of toal Zinc Calculated as Zinc Sulphide and Barium Sulphate: 99%min ZnS: 28%min ZnO: 0.3%max Volatile Matter (at 105C): 0.3%max Matter soluble in water: 0.4%max Residue on sieve 63um: 0.1%max Oil absorpation value(100g): 11 Packing: 25/50 P.P bag, 25MT/20’FCL Re: Lithopone B311 Appearance: White power Specification: Total of Zinc and BaSO4 (as ZnS): 99%min Total Zinc (as ZnS): 30%min Volatile matters at 105C: 0.3%max Zinc oxide: 0.3%max Soluble matters in water: 0.3%max Screen residues (63um mesh): 0.1%max Oil absorption (g/100g): 10%max Color killing (Compare with standard): 105%min Packing: 25/50 P.P bag, 25MT/20’FCL
|
|
» Chemicals/Paint & Pigments |
|
|
|
[Sell] Oxalic Acid |
|
|
Re: Oxalic Acid Specification: Total Acidity: 99.6% min Ash: 0.1% max Iron: 0.02% max Loss on ignition: 0.08% max Sulfate: 0.1% max Chloride: 0.002% max Heavy metal: 0.001% max Packing: 25/50 kg grey colour PP bag,, 23MT/20’FCL
|
|
» Chemicals/Paint & Pigments |
|
|
|
[Sell] Pentaerythritol |
|
|
Re: Pentaerythritol 98% Appearance: White crystal power or particles Specification: Content: 98%min Hydroxyl value: 48.5% min Heat Loss: 0.2% max Ash: 0.05% max Phthalic Color: 1 Packing: 25kg/bag, 20MT/20’FCL Re: Pentaerythritol 95% Appearance: White crystal powder or particles Specification: Mono-PE: 95.0%min Hydroxyl value: 47.5%min Moisture: 0.5%max Ash: 0.1%max Chromaticity: 2 Packing: 25kg/bag, 20MT/20’FCL Email: info at aimeitechem dot com
|
|
» Chemicals/Paint & Pigments |
|
|
|
[Sell] Titanium dioxide |
|
|
Re: Titanium dioxide Rutile type Appearance: White Power Specification: TiO2 Content: 94% min Rutile type conversion rate: 97% min Whiteness: 95% min Tint Redusing Power,compared with standard Samples : 100% min 105℃ Volatile matter: 0.8% max Oil Absorption(g/100g): 23 max 45 um sieve residue: 0.05% max PH value of aqueous suspension: 6.5-8.0 Hiding power: 25.0 max Water-soluble Matter: 0.5% max Packing: 25kg/bag in paper-plastic compound bag, 22MT/20FCL Re: Titanium Dioxide Anatase Type Appearance: White Power Specification: TiO2 Content: 98% min Whiteness: 96% min Tint Redusing Power : 100% min 45um Sieve Residue: 0.1% max 105℃ volatile matter: 0.5% max Water-soluble Matter: 0.5% max PH value: 6.5-8.0 Oil Absorption(g/100g): 26 max Hiding power: 30 max Packing: 25kg/ woven bag, 22MT/20FCL Email: info at aimeitechem dot com
|
|
» Chemicals/Paint & Pigments |
|
|
|
|
|
Pages: 1
|
|
|