|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
Subject: |
RTV-2 Silicon rubber for shoe soles making |
Description: |
1. Shoe mold silicone rubber applications Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. 2. Features of Shoe mold silicone rubber a. shoe soles mold making b. Two-component silicone rubber with tin-catalyst c. Cured under room temperature d. low shrinkage e. excellent fexibility & easy demould 3. Shoe Mold Silicone Rubber hy218 Standard Datasheet: Appearance: white Viscosity(cp): ≤15000 Hardness(A): 18±2 Tensile strength(Mpa) ≥1.3 Tear-strength (kn/m) ≥5 Elongation break: (%)≥300 Curing agent mixed rate(%): 2-3 Operate time(min): 30 Curing time(hours): 2-4 Notes: Mixing ratio, pot life and Demould time in the above table is measured under the room temperature of 25。C, relative humidity of 65% to 70%. The data is only for referfence, mixing ratio should be 2% to 3% modified according to various temperatures. Different colors are available if requested. 4. Shoe Mold Silicone Rubber Using Instruction: Shoe mold silicone rubber is used for pouring or brushing technique. The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. a. Take silicone rubber of 100g and add 2% curing agent for mixing evenly. b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. c. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Any questions of RTV-2 shoe mold silicone rubber, please feel free to contact wenson: Skype: wenson Email:wenson123@msn.cn Tel: 0086-755-89948019 Mob: 086-13686446510 Fax:086-755-89948030 Web:www(dot)szrl(dot)net
|
Placement Date: |
Dec 21, 2012 |
Expiration Date: |
Dec 21, 2013 |
|
|
|
|
|
|
Company Name: |
SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD |
Contact Person: |
wenson |
City: |
shenzhen |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005. Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
|
Business Type: |
Exporter, Manufacturer |
Areas of Interest: |
1. Chemicals/Rubber
|
|