|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
LC2000RF admittance level controller |
| Description: |
The product introduction
RF admittance level controller is base on the RF capacitive technology. Putting a wireless electric frequency to the detector, and through continuous analysis, the affect of surrounding inviroment is fixed. The energized detector and container skin consist of f two polar plate of the capacitor. The detector insulator and surrounding atmosphere turn into the medium materials, all materials have specific inductive capacity. The specific inductive capacity is above the atmosphere. When the atmosphere is replaced by other material, the capacity effect should be reinforced,resulting of changing the impedance of application situation, so the change of capacity value produces the change of impedance. The affect is measured by the circuit,which is compared with the reference datum which built by sensitivity setting(circuit).
The correct setting of sensitivity will affect the correct change of sensor output. The anti-adhesion circuit of the detector could make the hanging material of the detector to be ignored, or it could affect the sensitivity breakdown. Anti-inhesion circuit is used to the electric potential with the same wireless electric frequency which is added to the transduce detector. Because the circuit could not flow under the same electric potential, the anti-adhesion circuit usually flow through the circuit of the energized detector flowing from the cumulate material to the container skin. For this, the material measured is energized material and not the cumulate material.
Statement:
Technology statement:
1 technology parameter
electrical relay capacity:
DPDT, rating10A,115VA.c or 5A,22VA.C
Timelag: 0-30 seconds continuous adjusting
Power: 220VA.C or 24VD.C
Sensitivity: 0.5pF
Material temperature: -184oC-260 oC
The temperature resistant of circuit: -40 oC-80 oC
Power shutdown protection: high and low module, living spot adjusting
Shell: IP65, weight cast alunimum |
| Placement Date: |
May 22, 2013 |
| Expiration Date: |
May 22, 2014 |
|
|
|
|
|
|
Company Name: |
Yantai Auto Instrument Co.Ltd |
| Contact Person: |
Yan cuiping |
| City: |
YanSi |
| Country: |
Afghanistan
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Yantai Auto Instrument Making Company Limited is located in Yantai, a seaside resort in Shandong peninsula with charming natural beauty and convenient transportation. The company is specialized in developing, producing and marketing the process control instruments, possessing the complete ability of automatic system engineering.
We mainly produce defferential pressure transmitter, pressure transmitter, capacitive pressure sensor, RF admittance controller, tuning fork, level meter, winding pressure transmitter, magnetostrictive level gauge etc.. Which are widely used in the industries of electrical power, petroleum, metallurgy, medicine, food, brewing, textile, and build material etc.. The performance of the company are quickly increased through stable development for more than ten years since 1994.
We adopt firstly in Shandong of the certification of ISO9001:2000 for the instrument company by the premer company in July,2001, and we build the quality manangement system which comply with the international approval.
Our company is authorized to be the ??China Marketing General Agent?? CHCHcHCHIof ultasonic range finder by the Bohr company from Germany.
We build up the casting department. And we mainly apply the silica sol precision-casting technology to produce many kinds of cast steel such as carbon steel, stainless steel, alloy steel etc. for better service of our instrument products. |
| Business Type: |
Manufacturer |
| Areas of Interest: |
1. Agriculture & Farm/Animal Products
|
|
