|
|
|
|
|
|
|
[Sell]
Plastic wall spikes in UV stabilized weatherproof polypropylene |
 |
|
Plastic wall spikes prevent pigeon and other birds landing and nesting on your garden wall.
Resistant to weather, this band is made of polypropylene and attaches easily to the top of a fence or brick wall with nails or screws. It can also be used on the branches of trees or garages. Easy to cut and drill.
specification:
Made of UV stabilized plastic, weatherproof.
length: 50cm
Width: 5cm
Weight: 76g (for a band 50cm)
The tape is very discreet and harmoniously with the environment.
Strips 50cm x 4.5cm strips are hinged so that they can be easily installed on curved surfaces. Put two bands side by side to increase the width.
How to trim the plastic wall spikes:
You can cut the tape to give it dimension you want. To install the tape on a curved surface, immerse the strip into the hot water.
|
|
» Posted by: Vogel bird spikes company [China]  |
|
|
|
|
|
[Sell]
Wall Spikes made from stainless steel or galvanized steel plate |
|
|
Wall Spikes are a simple and effective method to prevent birds landing and nesting on your wall and fence, even domestic and commercial air conditioning. It can be easily fitted to the tops of wire mesh fence, concrete wall, gates and other surfaces.
We supply three kinds of metal wall spikes:
large type, middle type, and small type
Specification
Materials: stainless steel wire, hot dipped galvanized steel, and PVC coated plate. It is weather resistant and extremely durable
Plate thickness: 0.5mm - 2.5mm
Barb height: 64mm -140mm
Wall spike strips length 0. 5m - 2m
Base width - 50-65mm
Spikes pitch - 70-90mm
Large type galvanized wall spikes
Middle type stainless steel wall spikes |
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Anti bird netting - UV stabilized plastic bird protection nets |
|
|
Anti bird netting is ideal to protect about closed courtyards, light wells, loggias, balconies or roof soffits flight safely and permanently from pigeons and other birds. Many homes can be effectively protected only through the consistent use of bird nets made of polyethylene. Polyethylene is ideal material as chemical-free, permanent, non-rotting and extremely weather resistant.
Advantage:
Excellent protection and hardly any significant visual impairment, a bird net is hardly visible.
Flexible, light in weight and more usable year round by the UV stabilization. Easy to clean with water.
Very safe and cost effective method of bird control.
Protection nets from UV and moisture-resistant materials
Weather-and UV-resistant, and water-resistant.
Application:
Entire facades, atrium, balconies, angular houses, canopies, under roofs, dormer, and roof trusses, pitched roofs, occupied farms, steeples, balconies, trees, park homes, industrial metal structures.
Anti bird netting - polyethylene mesh specification
Thickness: 1.2mm
Technology: high strength knotted net
Material: polyethylene UV stabilized
Color: black, stone Color, White, Silver Grey
Mesh size: 50 x 50mm, 30 x 30mm (very suitable against pigeons) Width: 1-10m, length 5m, 10m, 20m, 50m,100m.
Mesh size: 20 x 20mm, 15 x 15mm, 10 x 10mm, 5 x 5mm (very suitable against sparrows and smaller birds). Width: 1-10m, length 5m, 10m.
The installation of pigeon networks is mainly horizontally across courtyards and light wells, but also can be vertical front facades and facade parts are stretched.
Can birds get stuck and die in nets?
When install the netting, it is tensioned and no gaps appear side, so that birds can not get tangled even to die.
Here you will find the net in the given roll width and length adjusted to your desired length. Then determine your desired roll length.
Anti bird netting in 5, 10, 20, 30, 50mm mesh opening |
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Swallow spikes for swallow control in 4 row spikes cover 15cm width |
|
|
Swallow spikes - a good solution for swallow control as a preventive measure.
We do not want swallows build their nests on the facade of our property, has the opportunity to prevent this with a swallow control. Swallows spikes have long spikes and efficiently prevent the landing and nesting of swallows under eaves. They are mounted in the eaves of the house - at precisely the angle between the house wall and roof overhang. The swallow control prevents preemptively that swallows find a landing and nesting. Very important When installing a swallow save the period from September to March should be chosen because no swallows nesting at this time.
Specification
Material: 1.4301 stainless steel (a rotting is almost impossible)
1 × 1m stainless steel strip 4 row spikes
S.S Strip thickness 2cm
Spikes wire 115mm / 145mm long, diameter 1.5mm
Covering width up to max. 150mm
Install:
On the base plate (volume) pre-drilled holes are provided.
Installation can be done by screwing, nailing or by spot gluing with a mounting adhesive.
The bar is easily divisible with pliers to required length. It is screwed directly against the wall under the eaves.
Stainless steel swallow spikes
|
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Pigeon spiral - stainless steel bird barrier for pigeon control |
|
|
The continuous spiral stainless steel flexible coil is attached to a strip of stainless steel. Under load, the individual turns to the side and turn stand up again. These spirals prevent efficiently the landing and nesting of birds.
This system is as injury-free pigeon control measure for humans and animals, is maintenance free and easy to install by bolting.
Specifications:
Strip and wire material: stainless steel 1.4301
Covering width: 110mm - 150mm
Diameter: 110mm
Wire thickness: 1.5mm
Spacing of turns: 35mm
Strip length: 50cm
Strip width: 2cm
Strip thickness: 0.8mm
Application: This stainless steel spiral pigeon control is widely used in schools, kindergartens, nursing homes, and hospitals, for protecting the following place: cornice, shutters, beams, dormer, window canopy, window sill, balcony, box blinds, and canopies.
|
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Stainless steel solar spikes for solar and photovoltaic systems |
|
|
Solar photovoltaic spikes prevent the pigeons at shelters and nesting under the solar modules. The sturdy and rugged spikes represent an effective, physical barrier for pigeons to enter the area between the roof and the solar modules.
Specifications:
Material: Stainless Steel 1.4301
Strip thickness: 0.8mm
Strip length: 1m
Strip width: 20mm
Technology: Spot welded
Distance between the adjacent two spikes: 25mm
Application: solar systems and photovoltaic systems
1- row solar spikes Specifications:
spikes diameter: 2.0mm
Length of the rod tips: 100mm , 125mm, 150mm, 190mm
4-row solar spikes Specifications:
spikes diameter: 1.5mm
Length of spikes: 110mm - 140mm
1- row solar spikes for solar modules protection
|
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Stainless steel gutter spikes against pigeons and seagulls |
|
|
2-row stainless steel bar type strong bird spikes for the gutter to defend against pigeons and seagulls. The pigeon spike is 1 meter long. The gutter spikes are clearly visible for pigeons and thus injuries are unlikely. With a sheet scissors, spikes are easily divisible to desired size.
Specification
Material: stainless steel 1.4301 (untreated)
Dimensions:
Length: 1000mm
Strip thickness: 2.0mm
Spike Outer Height: 140mm
Spike Interior Height: 105mm
Wire diameter 2.0mm (heavy duty)
The distance from spike to spike is 50mm
Holes in the mounting clips for fastening with screws or nails
Application: Gutters, balcony railings, awnings, fences and edges of all kinds. It is also used as pigeon Spikes for solar systems.
Advantages:
An absolutely effective, by screwing, even by inexperienced people easy to install protection pigeons.
Due to the high quality materials this pigeon protection is very low maintenance or maintenance-free.
Installation:
The spikes are welded to a 1m long bar and can be attached to the gutter by screwing (the mounting brackets) or sticking.
Accessories: required stainless steel screws, dowels and rivets.
Stainless steel gutter spikes used for gutter
|
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Pigeon spikes keep pigeons from your building and home |
|
|
Pigeon spikes for protection / defense provides a visually unobtrusive system to ward off pigeons from buildings without risk of injury to the animals. The bird control spikes are attached mainly on buildings, bridges and other structures to prevent pigeons from landing and nesting there.
They are effective form of protection against pigeons, and the pigeons are not killed or injured by the immune system. They are characterized by their effective action at low cost, flexibility and durability. So, Pigeons Spikes are recommend for bird control and protection
Application:
Pigeon spikes are ideal for use in projections, such as window sills and shutters, billboards, air conditioners and other appliances, small and large roof projections and straight edges.
For use on gutters: gutter bird spikes are specially made of stainless steel, which boast a special shape in order to protect both the gutter edges and the runoff from the pigeons. Of course, the full functionality of the gutters is guaranteed at all times.
Mounted:
pigeon spikes installation is usually done with a special adhesive on previously cleaned surfaces, but they can also be attached with screws and nails. The quality of the tips here is often critical to the success of the defense measure.
Our pigeons spikes are made of stainless steel 1.4301 spikes and strips, and spikes fixed to the polycarbonate or stainless steel 1.4301 strips. In our website you can find 2-row to 6-row spike protection systems. Pictures as follow:
|
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Stainless steel bird spikes on polycarbonate bar for bird control |
|
|
Pigeon spikes on polycarbonate bar - Combination of stainless steel bird spikes and polycarbonate bar.
We offer pigeon spikes on plastic with highly flexible and cost effective, wich offers a visually unobtrusive system to ward off larger birds of buildings, without risk of injury to the animals.
Application:
Pigeon spikes are used for protecting cornices, window sills, thin pipes, balcony railings against pigeon landing or nesting on it.
It is suitable for mounting on almost all surfaces (such as stone, wood, zinc, concrete, brick, etc.) by means of nails, screws.
It is easy to install and adapts flexibly in the form, for example, round buildings.
Predetermined holes (for fastening with screws or nails) on bar allow a quick and easy installation even by inexperienced people.
Specification:
Spikes material: stainless steel 1.4301
Spikes wire diameter 1.3mm and 12cm height
Strip material: UV-resistant polycarbonate with 1.3mm thickness
Polycarbonate strip width: 2cm
Spikes are fixedly plugged polycarbonate bar
Bar length: 50cm
Number of holes in the bar: 10
Package:100 (50 liner meters) in a box
For pigeons and similar size birds
2-row spikes covering width 10cm, amount of spikes per 50 cm bar: 20
3-row spikes covering width 15cm, amount of spikes per 50 cm bar: 30
4-row spikes covering width 18cm, amount of spikes per 50 cm bar: 40
5-row spikes covering width 22cm, amount of spikes per 50 cm bar: 50
6-row spikes covering width 25cm, amount of spikes per 50 cm bar: 60
2-row polycarbonate pigeon spikes
3-row polycarbonate pigeon spikes
4-row polycarbonate bird spikes |
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Stainless steel bird spikes most effective method of bird control |
|
|
Stainless steel bird spikes system has proven to be one of the best and most effective methods of bird control. The stainless steel spikes to protect roofs, ledges, fences, billboards from pigeons and seagulls, without hurting the birds.
Specifications:
stainless steel spikes on a stainless steel bar
Material: stainless steel 1.4301 (due to the flexible elastic spring steel, there is no danger of injury to pigeons)
Spikes wire diameter 1.3mm or 1.5mm, 130mm length
Distance between centers: 25mm
Technology: stainless steel spikes fully welded to stainless steel bar
Strip length: 50cm
Strip width:3cm
strip thickness: 2mm
Package: 100 pc (50 liner meters) in a box
1-row spikes covers a range of 4 - 5cm
2-row spikes covers a range of 10cm, Amount of spikes per 50 cm bar: 32
3-row spikes covers a range of 15cm
4 - row spikes up to 20cm mm width against seagulls landings.
5-row spikes covers a range of 23cm
6-row spikes covers a range of 26cm
Stainless steel bird spikes in 2-row spikes |
|
| » Posted by: Vogel bird spikes company [China] |
|
|
|
|
|
[Sell]
Invisible locked car safety box (anti-theft) |
|
|
| Invisible locked carsafety box - protect belonging, anti-theft device Have you ever had experience as these? A. Got off the car while leaving your cellphone and cash on seat. After finish you meeting or job and got back to your car, you found that your car's windows was smashed and the cash, cellphone were stoled? B.Driving the car to the beach and try to get a swimming while no where to store your personal belonging except the car seat? ... 2013 - Our new generation car safety box will solve all the above problems. What is this? It's a locked box install in the spare tyre. The box was made from strong stainless steel. Perfect match with the tyre. It's not easy to find as it's installed in the trunk. It comes with USB key/password lock.Even the theft found it and it's hard to open or take off from the trunk. The space of the box is large enough to stored cellphone, cash, company file, bank card, and others personal belonging. It's very easy to install. Just screw off the tyre and put the box in. (we have video for installation, pls contact us if you want). Now our generation 2013 can match for most of the Brand car in the market, from example, VW, Honda, Audi, Toyota . From R14 to R20 tyre. Anti-theft, car safe box - 2013 your first choice, please contact us for more info. |
|
| » Posted by: Dongguan Evertop Printing Supplies Limited [China] |
|
|
|
|
|
[Sell]
U type annealed wire, galvanized, PVC coated available |
|
|
Workable U Type Annealed Wire
U type anneal wires are mainly used to bind reinforced bars together in the construction industry for its premium performance of flexibility, corrosive resistance as well as attractive appearance. In recent years, U type binding wires are found great popularity in homes, enterprises and leisure entertainment.
U type tying wire is manufactured by annealed low carbon steel wire which possesses better ductility and workability. Galvanized, PVC coated and black annealed tie wires offer multiple choices for special purposes. Any length can be supplied. Sizes range from 0.8mm to 1.6mm while lengths 250mm to 600mm. Different dimensions required can be customized.
Note: Slight oil is applied to prevent rust during transportation.
|
|
| » Posted by: CAW Annealed Wire Co., Ltd [China] |
|
|
|
|
|
[Sell]
T6710 waste ink tank for Epson WP4531 4521 4511 |
|
|
| T6710 waste ink tank for Epson WP4531 4521 4511 4091 4011 M4011 For Use with printer models: WP-4531,4521,4011,4511,4091 (cartridge T6771-4 T6781-4) WP-4020,4520, 4530, 4540, 4533 (Cartridge T7011 7021 7031-4) WP-4015DN,4025DW,4515DN,4525DNF,4535DWF,4545DTWF PX-B750FPX-700 (Japan) Notice: 1.This tank chip is bigger than original one. It can not use on the original wasted ink tank.Only can use on the tank bought from us. 2. The chip is one time use, please change chip when it's done or bought another compatible tank with chip. |
|
| » Posted by: Dongguan Evertop Printing Supplies Limited [China] |
|
|
|
|
|
[Sell]
End treatment of corrugated metal pipe enhancing performances |
|
|
End treatments add a hydraulically superior, economical, and aesthetic property to various of culverts. They are often made of galvanized steel and aluminum. These materials are light, flexible and resistant to weathers, abrasion and corrosive liquids.
They can be combined with corrugated metal pipes in either annular or helical corrugations. End treatments can be reused when the culvert relocating or lengthening.
Safety end sections are available in 6 : 1 or 4 : 1 slopes. Standard end sections are suitable for corrugated pipes up to 2400 mm in diameter and pipe arches up to 2130 mm span by 1460 mm rise. For special diameters, please contact us.
Features:
Lightweight Economical Significantly improved flow characteristics Enhance scour and sedimentation conditions Controlling headwater depth
Culvert end treatment in steel is light and versatile Aluminum end section with a slope of 6 : 1
Economical and hydraulically superior end treatment for culverts |
|
| » Posted by: Lake Metal Culvert Co., Ltd [China] |
|
|
|
|
|
[Sell]
Pipe-arch outlasts concrete structure. Lightweight and economical |
|
|
Pipe-arch is a modification of round pipe in its low-profile. It is especially designed for culverts, bridges and underpasses with limited headroom, providing hydraulic benefits at low flow velocity. Usually, pipe-arches are equipped with end treatments to improve performances.
Culvert end treatment in steel is light and versatile Pipe-arch fabricated by structural plates are used in arctic weather, for its performance will not be severely affected
Benefits:
Lightweight: Steel or aluminum arches are so light to easy installation, for their mass approximately 1/10 and 1/30 respectively the mass of concrete structures.
Strength: Corrugations and soil arching around the pipe-arch make this lightweight structure to withstand relatively high loads, such as the impact and vibration of trucks, cars, trains and other vehicles and equipment.
Durability: Galvanized or aluminized coating significantly extends the life span reducing percentage of repairmen or maintenance.
Aesthetic appearance: Shining pipe-arch profile adds an attractive view to entry statements or embankment.
Applications:
Pipe-arches are often applied as culverts, small bridges, fish passages, grade separations.
Products description:
Corrugation profile: pitch by depth - 36×6mm, 68×13mm and 125×26mm;
Plate thickness: 1.2 to 3.5mm;
Span: 1854mm to 7620mm;
Rise: 1397mm to 4240mm;
Corrosion protection: hot-dip galvanized steel, aluminized, polymer coated
Pipe-Arch
Part No. Span Rise End Area Min. Cover (mm) Part No. Span Rise End Area Min. Cover (mm)
　 (mm) (mm) (m2) CL Vehicle E-80 　 (mm) (mm) (m2) CL Vehicle E-80
PAC01 1854 1397 2.04 300 381 PAC36 4242 2616 8.64 759 859
PAC02 1930 1448 2.23 300 396 PAC37 4267 2946 9.75 754 864
PAC03 2057 1499 2.42 300 422 PAC38 4293 2667 9.01 756 869
PAC04 2060 1520 2.49 300 422 PAC39 4318 2997 10.13 754 874
PAC05 2134 1549 2.6 300 437 PAC40 4343 2718 9.38 754 879
PAC06 2210 1600 2.88 300 452 PAC41 4370 2870 9.76 798 884
PAC07 2240 1630 2.9 300 458 PAC42 4394 3048 10.59 760 889
PAC08 2337 1651 3.07 300 478 PAC43 4521 2769 9.75 803 914
PAC09 2413 1702 3.25 308 493 PAC44 4547 3099 10.96 799 920
PAC10 2440 1750 3.36 311 498 PAC45 4674 2819 10.13 847 945
PAC11 2489 1753 3.53 318 508 PAC46 4720 3070 11.38 844 954
PAC12 2590 1880 3.87 330 528 PAC47 4724 2870 10.5 843 955
PAC13 2616 1803 3.72 333 533 PAC48 4750 3200 11.8 722 960
PAC14 2690 2080 4.49 343 548 PAC49 4775 2921 10.96 840 965
PAC15 2692 1854 3.99 343 549 PAC50 4826 2997 11.33 832 975
PAC16 2845 1905 4.27 362 579 PAC51 4826 3251 12.26 844 975
PAC17 2896 1956 4.55 368 589 PAC52 4953 3302 12.73 878 1001
PAC18 2972 2007 4.83 378 605 PAC53 5004 3023 11.71 886 1011
PAC19 3100 1980 4.83 600 630 PAC54 5050 3330 13.24 887 1020
PAC20 3124 2057 5.11 600 635 PAC55 5055 3073 12.17 883 1021
PAC21 3251 2108 5.39 600 660 PAC56 5182 3404 13.56 924 1047
PAC22 3327 2159 5.67 600 676 PAC57 5232 3454 14.03 923 1057
PAC23 3400 2010 5.28 684 690 PAC58 5309 3505 14.59 928 1072
PAC24 3480 2210 5.95 630 706 PAC59 5490 3530 15.1 975 1108
PAC25 3531 2261 6.22 628 716 PAC60 5512 3607 15.51 967 1113
PAC26 3607 2311 6.6 633 732 PAC61 5664 3658 15.98 1009 1143
PAC27 3730 2290 6.61 722 756 PAC62 5715 3708 16.44 1007 1153
PAC28 3759 2362 6.87 674 762 PAC63 5890 3710 17.07 1056 1188
PAC29 3810 2413 7.25 672 772 PAC64 5944 3810 17.47 1053 1199
PAC30 3861 2464 7.53 671 782 PAC65 5994 3861 18.02 1051 1209
PAC31 3890 2690 8.29 682 788 PAC66 6071 3912 18.58 1056 1224
PAC32 3912 2540 7.9 665 793 PAC67 6250 3910 19.18 1106 1260
PAC33 4039 2845 9.01 709 818 PAC68 6274 4013 19.6 1095 1265
PAC34 4089 2565 8.27 716 828 PAC69 7040 4060 22.48 1422 1418
PAC35 4115 2896 9.48 715 833 PAC70 7620 4240 25.27 1571 1534 |
|
| » Posted by: Lake Metal Culvert Co., Ltd [China] |
|
|
|
|
|
[Sell]
Structural plate pipe protecting and decorating the landscape |
|
|
Structural plate pipe culvert is rapidly become an alternative of culvert, bridge and underpass construction, for its high strength and affordability and easy handling. Round pipe is a basic shape; it also has different versions such as vertical and horizontal ellipse, pear shape. All these shapes have their own characters and the most suitable applications.
Round pipe is the most common and versatile shape. All the plates share the same radius. Its maximum span can reach 8.02 meter. It is primarily used as culverts, sub-drains, sewers, service tunnels, but also appropriate for storage bins, tunnels and bridges.
Pear shape features wide at top and narrow at bottom. This unique shape is very suitable for underpasses and grade separations. Sometimes, it is also employed as storm sewer and railway tunnels. It is 8.56 meter wide at its maximum and total rise can reach 8.61 meter.
Ellipse shapes are ideal for underpasses, recovery and service tunnels. Horizontal ellipse prefers to vehicular underpasses, multi-lane, grade separations and tunnels, while vertical ellipse is better for single lane vehicular and railway underpasses.
Although they are different in shapes, they have one point in common: they are assembled by structural plates. Unlike concrete constructions, they have lightweight, short delivery time, economic cost as well as aesthetic appearances.
Round pipe culverts are polymer coated for 100+ years of service period
Part No. Span End Area
Min. Cover (mm)
Part No. Span End Area Min.Cover(mm)
(mm) (m2) CL Vehicle E-80 (mm) (m2) CL Vehicle E-80
SPR01 1500 1.77 300 310 SPR14 4300 14.49 725 870
SPR02 1660 2.16 300 342 SPR15 4610 16.66 777 932
SPR03 1810 2.57 300 372 SPR16 4920 18.99 829 994
SPR04 1970 3.05 300 404 SPR17 5230 21.46 880 1056
SPR05 2120 3.53 300 434 SPR18 5540 24.08 932 1118
SPR06 2280 4.08 300 466 SPR19 5850 26.86 984 1180
SPR07 2430 4.64 310 496 SPR20 6160 29.79 1035 1242
SPR08 2590 5.27 330 528 SPR21 6470 32.87 1087 1304
SPR09 2740 5.89 349 558 SPR22 6780 36.1 1139 1366
SPR10 3050 7.3 600 620 SPR23 7090 39.48 1190 1428
SPR11 3360 8.86 600 682 SPR24 7400 43.01 1242 1490
SPR12 3670 10.57 620 744 SPR25 7710 46.7 1294 1552
SPR13 3990 12.5 674 808 SPR26 8020 50.53 1345 1614
Vertical Ellipse
Vertical ellipse sketch drawing
Vertical ellipse culvert through a small hill
Part No. Span Rise End Area Min. Cover(mm)
(mm) (mm) (m2) CL Vehicle E-80
SPV01 2310 2570 4.63 300 472
SPV02 2460 2740 5.23 314 502
SPV03 2620 2900 5.89 334 534
SPV04 2920 3230 7.29 371 594
SPV05 3200 3560 8.86 600 650
SPV06 3580 3890 10.87 600 726
SPV07 3810 4220 12.43 312 772
SPV08 4140 4570 14.43 665 838
SPV09 4340 4830 16.58 694 878
SPV10 4650 5160 18.88 744 940
SPV11 4950 5460 21.35 794 1000
SPV12 5260 5820 23.97 842 1062
SPV13 5540 6120 26.73 887 1118
SPV14 5840 6450 29.65 935 1178
SPV15 6120 6780 32.72 978 1234
horizontal ellipse pipe sketch view
Twin horizontal ellipse structural plate pipes as storm water sewers
Horizontal Ellipse
Part No. Span (ft. - in.) Rise (Ft. In.) End Area (Sq. Ft.)
HE01 9-2 6-8 48
HE02 9-11 7-0 54
HE03 10-7 7-3 60
HE04 10-11 7-11 68
HE05 11-4 7-6 66
HE06 11-8 8-3 75
HE07 12-0 8-11 84
HE08 12-1 7-9 73
HE09 12-5 8-6 82
HE10 12-9 9-2 92
HE11 12-10 8-1 80
HE12 13-2 8-9 89
HE13 13-6 9-6 99
HE14 13-7 8-4 87
HE15 13-11 9-0 97
HE16 14-3 9-9 108
HE17 14-7 10-5 119
HE18 14-11 11-2 130
NOTE: Dimensions are to inside corrugation crests.
Pear shape culvert profile
Pear-shaped culvert
Part No. Max. Span Bottom Rise Total Rise End Area
(mm) (mm) (mm) (m2)
SPD01 7210 4550 7820 44.69
SPD02 7570 5100 8430 50.54
SPD03 8360 5510 8230 53.7
SPD04 8100 5460 8610 54.91
SPD05 8560 5130 8480 57.97
SPD06 7320 4880 8530 48.84 |
|
| » Posted by: Lake Metal Culvert Co., Ltd [China] |
|
|
|
|
|
[Sell]
Corrugated structural plate assembled into seven arches |
|
|
Corrugated structural plates are available in steel and aluminum. Both are hot-dip-galvanized with 3-ounce zinc coating, which gives the plate a 40% longer life span than regular corrugated steel pipe.
Fig-2, Structural plates can be assembled to seven shapes
For similar size, structural plates are far lighter than reinforced concrete pipe, reducing equipment costs and allowing for easy operation of long preassembled structures.
Corrugated metal structural plates are conveyed to job site and finished assembling into final shapes through bolting. As finished on-site, structural plates won?t have shipment limitations as did the large conventional pipes. They can be bolted into the desired shape and size to meet the practical application. Especially, when spans exceed 12 ft., structural plate is the premier choice.
Steel structural plate pipe is bolted by modular plates
Hot-dipped galvanized steel structural plates stocked at the warehouse.
Structural plates combine the advantage of deep-corrugated, hot-dipped galvanized, light weight, easy shipment and installation. They are the most versatile on the market and extensively used both at home and abroad.
Corrugated steel structural plates come in seven basic shapes: (see fig-2) round, versatile ellipse, low and high profile, standard arch, pipe arch, and box culverts. Each type has its own features and extensive applications.
Benefits
Strong: Deep-corrugated construction gives it 8 times the stiffness of conventional structural plate and the ability of withstanding the heaviest loads.
Lightweight: Aluminum structural plates are much lighter than typical structural plate or conventional plates, making them suitable for remote areas.
Long life span: Hot dipped galvanized coating creates a protective film and gives structural plates a 50% longer life span.
Friendly to Environment: The structure types virtually eliminate streamed interference. And their wide-span prevents blockages and flooding. Unlike conventional bridges, which need continuous maintenance, the structures made by metal structural plates require fewer repairs. |
|
| » Posted by: Lake Metal Culvert Co., Ltd [China] |
|
|
|
|
|
[Sell]
Aluminum box culvert, the premier replacement of concrete culvert |
|
|
Aluminum box culverts provide a practical and low-cost solution for small bridge or other hydraulic structures. Aluminum structural plate box culverts are field assembled into the desired shape depending on practical situations. Box culverts should be given top priority when the headroom over the structure is limited, for example, 1.4 to 5.0 feet.
Aluminum box culvert in final shape
Compared with conventional concrete box culverts, box culverts do little damage to the environment, especially environmentally sensitive streams. Aluminum box culverts are not affected by the extreme weathers, such as frost weather, eliminating regular and expensive maintenance. They also have short delivery time, economic cost, and easy installation and free maintenance.
Benefits of Aluminum structural plate box culvert
Lightweight
Lightweight of structural plate box culverts is a vital benefit of easy handling. For similar volume, the weight of aluminum accounts for 2% of concrete pipe and 1/3 of steel structure.
Easy installation
Aluminum structural plates can be preassembled not at the final installation place to significantly shorten the handling time. Lightweight makes the plates easy to handle at the installation plate.
Long life span
Aluminum alloy form a thin but tough surface barrier when exposed to oxygen. This barrier is not easy to damaged or removed by harsh environment conditions. A great number of studies and researches have proven that aluminum drainage products have at least 75 year service life for 0.1 inch-thickness aluminum plate. In salt water area like coastal areas, granular backfill materials around the structure will not reduce but enhance performance.
Friendly to environment
installation of aluminum box culvert reduce or abandon the use of conventional building materials, such as cement, sand, gravel, wood. And its delivery time is much shorter. All these factors contribute to little damage to environments.
Product specifications
Part No. Span(mm) Rise(mm) End area (m2)
ACB01 3170 1180 3.12
ACB02 3550 1420 4.33
ACB03 3840 1465 4.94
ACB04 3965 2210 7.35
ACB05 3865 1260 4.18
ACB06 4105 1860 6.56
ACB07 4210 1310 4.76
ACB08 4735 1960 8.16
ACB09 4550 1360 5.36
ACB10 4890 1610 6.97
ACB11 4860 2365 10.09
ACB12 5155 2420 11.06
ACB13 5215 1670 7.72
ACB14 5360 2075 9.89
ACB15 5320 1440 6.62
ACB16 5445 2480 12.07
ACB17 5655 1505 7.33
ACB18 5955 2645 14.23
ACB19 5895 1595 8.17
ACB20 6165 1900 10.33
ACB21 6235 2715 15.36
ACB22 6320 1645 8.91
ACB23 6480 1975 11.25
ACB24 6495 2380 13.89
ACB25 6645 1720 9.77
ACB26 6970 1795 10.67
ACB27 7000 2200 13.5
ACB28 7025 2610 16.35
ACB29 7290 1875 11.62
ACB30 7300 2285 14.58
ACB31 7310 2690 17.56
Part No. Span (mm) Rise (mm) End area (m2)
ACB32 7405 1680 10.21
ACB33 7800 1965 12.71
ACB34 7945 2370 15.87
ACB35 8575 1920 13.9
ACB36 8605 2325 17.38
ACB37 8635 2735 20.89
ACB38 9145 1940 14.64
ACB39 9225 2345 18.35
ACB40 9310 2750 22.1
ACB41 9810 2105 16.92
ACB42 9865 2510 20.9
ACB43 9920 2920 24.92
ACB44 10460 2285 19.43
ACB45 10485 2690 23.68
ACB46 10515 3100 27.95
ACB47 10895 2355 20.59
ACB48 10940 2760 25.02
ACB49 10990 3165 29.47
ACB50 11645 2530 23.31
ACB51 11700 2935 28.04
ACB52 11750 3345 32.81
ACB53 12270 2745 26.46
ACB54 12290 3150 31.45
ACB55 12315 3555 36.45
ACB56 13028 2830 30.72
ACB57 13050 3236 36.02
ACB58 14092 3071 35.61
ACB59 14111 3477 41.34
ACB60 15020 3168 38.38
ACB61 15038 3574 44.48
ACB62 15579 3845 49.46
ACB63 15748 3994 52.12
Aluminum box culvert used as a bridge, which will significantly decrease bridge budget but will enhance the performance. |
|
| » Posted by: Lake Metal Culvert Co., Ltd [China] |
|
|
|
|
|
[Sell]
Corrugated metal pipe does better but saves money and time |
|
|
Corrugated metal pipe is a perfect combination of strength, aesthetics, durability, economy and performance. An increasing number of engineers and designers tend to choose corrugated metal pipes for culverts, storm sewers, small bridges, grade separations and storm water detention systems.
Corrugated metal pipes are available in a series of corrugation profiles and wall thicknesses with the diameter up to 144?. To extend their service lives, various protective coatings are provided, including galvanized, aluminized and polymer coated. Corrugated pipes can be fabricated by steel or aluminum which doesn?t need protective coating. All these choices allow designers and engineers to choose the appropriate pipe in accordance with the practical applications.
Polymer coated corrugated steel pipe can serve 100 plus years
Corrugated aluminum pipe at manufacturing shop
Optional coating
Galvanized corrugated steel pipe, galvanized method is a standard way to enlarge life spans of steel products. Research shows that galvanized coating provide about 25 years of service period.Aluminized type 2 coating corrugated steel pipe offer excellent corrosion resistance against corrosive media and abrasive bedload. Its maximum life span can reach 75 years.
Polymer coated corrugated steel pipe will withstand to aggressive conditions with high concentrations of acids and alkalis. Its perfect performances surpass any concrete pipes.
Corrugated Metal Pipe
Part No. Corrugations (pitch by depth) (inch) Round Pipe Diameter(inch)
CMP01 1-1/2 × 1/4 6 - 10
CMP02 2-2/3 × 1/2 12 - 72
CMP03 3 × 1 48 - 102
CMP04 5 × 1 48 - 144
Benefits:
Lightweight
Economical
Easy to install
Versatile
Durable
A series of sizes, thicknesses, materials and coatings to be chosen.
Deep corrugation adds strength to the pipe.
Corrugated steel pipe installation spent two days containing the prepared work of one and a half days
|
|
| » Posted by: Lake Metal Culvert Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell China high purity Testosterone Isocaproate |
|
|
"Testosterone Isocaproate
Testosterone Isocaproate CAS NO.:15262-86-9
Testosterone Isocaproate Chemical Name: 4-Androsten-17beta-ol-3-one Isocapronate
Testosterone Isocaproate Molecular Formula: C25H38O3
Testosterone Isocaproate Molecular weight: 386.57
Testosterone Isocaproate Assay: 98.0%
Testosterone Isocaproate Appearance: white crystalline powder
Testosterone Isocaproate Standard: BP2003
Testosterone Isocaproate Packing: 1kg/aluminum foil bag
Testosterone Isocaproatemin. order quantity: 100g
Testosterone Isocaproate Payment: Western Union, Moneygram, Paypal or T/T
Testosterone Isocaproate Shipment: EMS, DHL, FeDex
Testosterone Isocaproate Delivery: safe & timely, around 7days after payment.
"
Keywords: Pharmaceutical chemicals,Anabolic steroids, bodybuilding
Product list:
1.Testosterone series
17alpha-Methyl-1-testosterone
Testosterone Acetate
Testosterone Enanthate
Testosterone Propionate
Testosterone Cypionate
Methyltestosterone
Testosterone Undecanoate
Testosterone Decanoate
Testosterone Isocaproate
Testosterone
2.Nandrolone series
Nandrolone
Nandrolone Phenylpropionate
Nandrolone Decanoate
Trenbolone Series
Trenbolone Cyclohexylmethylcarbonate
Trenbolone Enanthate
Trenbolone Acetate
Metribolone
3.Boldenone Series
Boldenone Cypionate
Boldenone Acetate
Boldenone Undecylenate
4.Dromostanolone Series
Dromostanolone Propionate
Dromostanolone Enanthate
5.Hormone /Steroids
4-Chlorotestosterone Acetate
Methandrostenolone(Dianabol)
Oxymetholone(Anadrol)
Stanozolol(Winstrol)
Mestanolone
Turinabol
Oxandrolone
Fluoxymesterone
Liothyronine Sodium
Anastrozole(Arimidex)
Dutasteride
Mesterolone
Methenolone Enanthate
Clomiphene Citrate(Clomid)
Methenolone Acetate
Finasteride
Exemestane(Aromasin)
6.APIS
Vardenafil Hydrochloride
Tadalafil Citrate
Sildenafil Citrate
17a-Methyl-Drostanolone
Tamoxifen Citrate
Letrozole(Femara)
Dapoxetine Hydrochloride
|
|
| » Posted by: Landmark Nutraceuticals Co.,Limited [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 next»
|
|
|
