|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Platinum cured silicone rubber Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of FDA grade silicone, generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1 to 1.It is suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other food product molds making . Advantage of platinum cure silicone rubber 1) Non-shrinkage (less than 0.1%) 2) high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1) 4) high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber Step One: Take 100g of part A and 100g of part B and mix in 1 to1 and mix the two parts evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly. Shelf life for silicon rubber for mold making 8 to10months, when stored in a dry and cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A plus 20kg/drum for part B in one set ,200 kg/drum for part A plus 200kg/drum for part B in one set For more information , pls feel free to contact Ms Orianna office no. :0086-755-89948013 Mob:86-18938867545 Skype:orianna317 Email :hyyg(at)szrl(dot)net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Platinum cured silicone rubber for tire mold Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of translucent liquid, generally named two-components silicone rubber with mixing in 1 to1 .It is mainly suitable for tire molds making . Advantage of platinum cure silicone rubber for tire mold 1) Non-shrinkage 2) high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1 to1 ) 4) high temperature resistant in 250 centigrade Operation instruction of platinum cure silicone rubber for tire mold Step One: Take 100g of part A and 100g of part B and mix in 1 to1 and mix the two parts evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly. Shelf life for silicon rubber for mold making 8 to10months, when stored in a dry and cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A plus 20kg/drum for part B in one set, 200kg/drum for part A plus 200kg/drum for part B in one set For more information , pls feel free to contact Ms Orianna office no. :0086-755-89948013 Mob:86-18938867545 Skype:orianna317 Email :hyyg(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry. 2. Silicon rubber for mold making is applicable for large statue Buddha, relieve, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50 shore A after curing with features: (1) high tensile and tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3 to 5 minutes,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Brushing cast and Perfusion Molding operation Shelf life for silicon rubber for mold making 10 to12months, when stored in a dry to cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle,5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum For more information, pls feel free to contact Ms Orianna office no. : 0086-755-89948013 Mob: 86-18938867545 Skype: orianna317 Email : hyyg(at)szrl(dot)net Welcome to our website www dot szrl dot n
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Octyl 4-methoxycinnamate |
|
|
Octyl 4-methoxycinnamate CAS:5466-77-3 Specification:98% Packaging:25kg Barrel Molecular formula: C18H26O3 Molecular Weight: 290.4 .Quality Standard: Enterprise standard Packing: 25kg Properties: colorless to light yellow viscous liquid. Does not dissolve in water, soluble in organic solvents such as ethanol, should be stored in a cool place closed, boiling point 198-200 ? C, density 1.009, refractive index 1.543-1.547, flash point 193 ? C, content: ≥ 98%; naturally: not reported. Uses: 1, This product is a good UV-absorbent UVB region, can effectively prevent 280-330mm UV, and the absorption rate of skin stimulation, safety, and is almost an ideal sunscreen. for the preparation of sunscreen (cream, milk, liquid), and other skin care cosmetics, can effectively absorb the sun in the ultraviolet, to prevent the skin drying red, sunburn, drying ink, but also light-sensitive dermatitis treatments. 2, in the industry as a plastic, ink anti-aging agents and UV absorbers. 3, oil-soluble UV-B absorbing liquid can be mixed with various types of sunscreen.
|
|
» Posted by: Cinnamic family [China] |
|
|
|
|
|
[Sell]
cinnamyl formate |
|
|
cinnamyl formate Product Name: cinnamyl formate CAS NO. 104-65-4 EINECS No. 203-223-3 Molecular Formula C10H10O2 MW 162.18 Boiling point: 250 ℃, flash point: 100 ℃ or more. Relative density (25 ℃) :1.077-1 .082, Refractive index (20 ℃) :1.550-1 .556.Signs of dangerous goods Packaging specifications: 25kg cardboard drum Specifications Model: 98% enterprise standard Physical and Chemical Properties: colorless or light yellow transparent liquid with cinnamon like balsam gas, has a bitter taste. Miscible in ethanol, ethyl ether, chloroform and most of the non-volatile oil, a few do not dissolve in water. Usage: spices. Is mainly used for the preparation of strawberry, raspberry, peach, banana and spices such as flavor.
|
|
» Posted by: Cinnamic family [China] |
|
|
|
|
|
[Sell]
Ethyl 4'-hydroxy-3'-methoxycinnamate |
|
|
Ethyl 4'-hydroxy-3'-methoxycinnamate Product name: Ethyl 4'-hydroxy-3'-methoxycinnamate Synonym: ethyl 4-hydroxy-3-methoxycinnamate CAS:4046-02-0 Specification:98% packaging: 25 kg drum Detection methods: chromatography CAS No. :4046 -02-0 formula: C12H15O4 Molecular Weight: 223.24 Melting point :56-58 ? Loss on drying: ≤ 0.10% Content (HPLC): ≥ 98.0% of dangerous goods symbol: Xi Risk Codes: R36/37/38 Safety Instructions : S26; S37/39 Packing: 25 kg / cardboard drum. Properties: white crystalline powder Save: dark, closed storage. Preparation: ferulic acid / ferulic acid ethyl ester is angelica, Chuanxiong and other active ingredients extracted from traditional Chinese medicine.
|
|
» Posted by: Cinnamic family [China] |
|
|
|
|
|
[Sell]
Methyl 4-hydroxy-3-methoxycinnamate |
|
|
Methyl 4-hydroxy-3-methoxycinnamate CAS:2309-07-1 Specification:98% packaging: 25 kg drum Detection methods: chromatography CAS RN :2309-07-1 Molecular Formula C11H12O4 Molecular Weight 208.21 Product content: 98% Quality Standard: Enterprise standard Packing: 25KG / drum product patents: 821180208 Description: ferulic acid, ferulic acid methyl ester (ethyl) ester, an active ingredient in 99%, white crystalline powder. Antioxidant, whitening, anti-inflammatory and other effects. Cosmetics for skin, skin with a silk texture.
|
|
» Posted by: Cinnamic family [China] |
|
|
|
|
|
[Sell]
Cinnamyl bromide |
|
|
Cinnamyl bromide CINNAMYL BROMIDE;BETA-BROMOMETHYLSTYRENE;3-BROMO-1-PHENYL-1-PROPENE; 3-BROMO-1-PHENYLPROPENE;3-BROMO-1-PHENYL PROPENE-1;3-BROM-1-PHENYLPROPEN; (3-BROMOPROPENYL)BENZENE;3-PHENYLALLYLBROMID Molecular Formula, , C9H9Br Molecular Weight, , 197.07 CAS Registry Number, , 4392-24-9 EINECS, , 224-511-5 Density, , 1.332 Melting point, , 26-32 ?C Boiling point, , 103 ?C (22 mmHg) Refractive index, , 1.621 Flash point, , 87 ℃
|
|
» Posted by: China Cinnamic [China] |
|
|
|
|
|
[Sell]
3-Phenylpropionic acid |
|
|
3-Phenylpropionic acid Name: 3-Phenylpropionic acid Alias: Benzylacetic acid Hydrocinnamic acid; beta-Phenylpropionic acid Benzenepropanoic acid 3-Phenylpropanoic acid Benzenepropionic acid Dihydrocinnamic acid CAS: 501-52-0 Properties: Prism-like white crystal; MP: 48.5?C, BP:280?C, Density: 1.07; Free soluble in hot-water,alcohol, benzene, chloroform, ether, glacial acetic acid, petr ether and carbon disulfide. Slightly soluble in cold water, With the steam can be volatile. Usage: It is the spice of a perfume fixative
|
|
» Posted by: China Cinnamic [China] |
|
|
|
|
|
[Sell]
3-Hydroxycinnamic acid |
|
|
3-Hydroxycinnamic acid Chemical Name:3-Coumaric acid CAS#: 14755-02-3 Assay: 98%min Appearance: white crystal Mp: 189-192 degree C Molecular formula: C9H8O3 Molecular weight: 164.16 Usage: organic chemical intermediates
|
|
» Posted by: China Cinnamic [China] |
|
|
|
|
|
[Sell]
Acetic Acid Deoxy Corticosterone |
|
|
Acetic Acid Deoxy Corticosterone Molecular Formula:C23H32O4 Molecular Weight:372.50 Product Implementation Quality Standard: USP, EP, BP |
|
» Posted by: Hubei chemical company [China] |
|
|
|
|
|
[Sell]
Cortisone Acetate |
|
|
Cortisone Acetate Molecular Formula:C23H32O6 Molecular Weight:404.5 CAS:50-03-3 Product Implementation Quality Standard: USP, EP, BP |
|
» Posted by: Hubei chemical company [China] |
|
|
|
|
|
[Sell]
Hydrocortisone Acetate |
|
|
Hydrocortisone Acetate Molecular Formula:C23H32O6 Molecular Weight:404.5 CAS:50-03-3 Product Implementation Quality Standard: USP, EP |
|
» Posted by: Hubei chemical company [China] |
|
|
|
|
|
[Sell]
Ethynodiol diacetate |
|
|
Ethynodiol diacetate Molecular Formula: C6H6O4 Formula Weight: 142.11 CAS:297-76-7 Appearance white fine powder Packing:5kg/drum 25kg/drum |
|
» Posted by: Wuhan chemical company [China] |
|
|
|
|
|
[Sell]
Ethinylestradiol |
|
|
Ethinylestradiol CAS NO: 57-63-6 Molecular Weight: 296.41 Molecular Formula: C20H24O2 Standard: USP28 |
|
» Posted by: Wuhan chemical company [China] |
|
|
|
|
|
[Sell]
Norethisterone |
|
|
Norethisterone Molecular Formula C20H26O2 Molecular Weight 298.42 CAS NO. 68-22-4 Package: according to clients' requirement Standard: BP2002, EP4 |
|
» Posted by: Wuhan chemical company [China] |
|
|
|
|
|
[Sell]
4-Methoxycinnamic acid |
|
|
.4-Methoxycinnamic acid Chemical Name: 4-Methoxycinnamic acid Molecular Formula: C10H10O3 Formula Weight: 178.18 CAS No.: 830-09-1 Appearance:white crystal powder,it can be solved in ethanol, ethyl acetate and other organic solvent. Assay :99% Usage:It can be used for organic synthesize intermediate |
|
» Posted by: Changjiang Cinnamon Research and Development Co., Ltd [China] |
|
|
|
|
|
[Sell]
2-METHOXYCINNAMIC ACID |
|
|
2-METHOXYCINNAMIC ACID
Chemical Name: 2-METHOXYCINNAMIC ACID Molecular Formula: C11H12O3 Formula Weight: 192.21 CAS No.: 69038-81-9 Appearance:white crystal powder,it can be solved in ethanol, ethyl acetate and other organic solvent. Assay :99% Usage:It can be used for organic synthesize intermediate |
|
» Posted by: Changjiang Cinnamon Research and Development Co., Ltd [China] |
|
|
|
|
|
[Sell]
4-Formylcinnamic acid |
|
|
4-Formylcinnamic acid Chemical Name: 4-Formylcinnamic acid Molecular Formula: C10H8O3 Formula Weight: 176.17 CAS No.: 23359-08-2 Appearance:white or canary crystal powder,it can be solved in ethanol, ethyl acetate and other organic solvent. Assay :99% Usage:It can be used for organic medicine intermediate |
|
» Posted by: Changjiang Cinnamon Research and Development Co., Ltd [China] |
|
|
|
|
|
[Sell]
p-methyl cinnamic acid |
|
|
p-methyl cinnamic acid Chemical Name: p-methyl cinnamic acid Molecular Formula: C10H10O2 Formula Weight: 162.19 CAS No.: 1866-39-3 Appearance:white crystal powder,it can be solved in ethanol, ethyl acetate and other organic solvent. Assay :99% Usage:It can be used for organic synthesize intermediate
|
|
» Posted by: Wuhan Yuancheng Gongchuang Technology Co.Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 next»
|
|