|
|
|
|
|
|
|
[Sell]
solar water heat pipe |
 |
|
| solar water heater parts - Heat pipe 1) The tube structure is between all-glass evacuated tube and metal-glass evacuated tube with Heat pipes. 2) Suitable for frigid zones because there is no water in the tube. 3) Designed for pressure system. 4) Heat pipe material: TP2 copper. 5) The heat collecting part is a vacuum glass tube that lowers heat loss. 6) Stable solar conversion throughout the day, with the round shaped tube allowing solar penetration from all angles. |
|
» Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China]  |
|
|
|
|
|
[Sell]
Flake Ice Machine |
|
|
| 1.5MR series equipment covers a wide range from 5MR-50 to 5MR-250F with producing 0.5 to 25 tons/day in thicknesses of 1 to 1.5mm. It's dry and loosen. 2.Compared to plate ice, flake ice has a large surface area which is good for rapidly cooling and holding low temperature. 3.Flake icemakers are all designed for indoor usage. Contact us for more information about outdoor models. 4.Flake icemakers are designed to operate solely with fresh water. If density of seawater exceeds 200ppm, the seawater flake ice machine is a better choice. |
|
| » Posted by: Qingdao Iceman Ice Machine Company [China] |
|
|
|
|
|
[Sell]
Solar pressurized tank |
|
|
| solar water heater parts - Pressurized tank 1). It adopts the no welding line with the blue diamond internal bladder, and the lifespan is especially long. (2). For the all closed separated tank, the rated pressure is 0.6Mpa. (3). It adopts the super thick insulation layer, because it can keep warm and save electric energy. (4). It adopts the one-way anti-over pressure device, if the pressure is more than 0.6Mpa, the relief valve can reduce pressure and overflow automatically, so that the dirt in the tank can be drained easily. (5). Temperature pressure relief valve can protect overpressure. (6). The controller imported from France, which can start heating and cut off when the temperature over heat automatically, besides, the two poles could moved at the same time. (7) When the leakage of the electric current is more than 10mA, it could cut off the electrical source automatically in order to keep safe. (8) There is the anode magnesium bar inside the tank to extend the lifespan. (9) The product adopts the national standard of the GB4706.12 (10) The separated tank is especially suitable for water use of houses, hospitals, schools and the hotels. |
|
| » Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China] |
|
|
|
|
|
[Sell]
Seamless steel pipe for geological drill purposes |
|
|
| Changzhou yuanyang steel tube Co.,Ltd is a professional corporation for seamless steel tubes for geological drill purposes, which is located in eastern of Changzhou Jiangsu Province. Physical geography location is superior, near Hu-ning Railway & expressway and near the Jing-Hang grant canal . It is easy for visit and shipping. |
|
| » Posted by: Changzhou yuanyang steel tube Co.,Ltd [China] |
|
|
|
|
|
[Sell]
cooler (CE-10) |
|
|
| CT WIND COOLER(HOT AIR EXCHANGER) It use high efficient aluminum hot air exchanger,it's designed for control the oil&water&air's temperature for equipments. It has privilege of energy conservation,environmental friendly, cool fast, small input power, big cooling power, High energy and efficiency rate, strong safe reliability, easy operation, easy maintenance etc.The CT wind cooler is widely used in hydraulic machines, hydraulic briquetting press, hydraulic waste scrap baler, large hydraulic shearing machine, construction machinery, machine tools and equipments which with hydraulic systems to cool down the machine, disperse heat, so can extend the machine lifetime and enhance equipment work efficiency Product characteristics: 1. Environmental friendly:the cooling source is the nature air,with no pollution 2. Good cooling effe:The hot air exchanger is light and well resist shock,It's made by magnesium aluminum alloy,insert with wings, which can cool down liquid directly and utmost increase heat dissipation area,accelerate the heat transfer ability. 3. Saft: Even if the hot exchanger and cooler broken, it not like the water cooler, will mix the oil and water together ,so will damage system and make loss. Wind cooler not. 4. Longer lifetime, higher working pressure 5. Low Running and maintenance cost :it's about 30% running and maintenance cost of similar product, 50-70% invest cost of similar product.And it's easy for maintenance because the cooler use individual outer circulation systerm,easy install and not effect the use of the machine. Wind cooler Model No and Specification CE series wind cooler specification Wind cool type oil cooler ,When Environment temperature and oil input temperature has 30 degree difference Model No. Input &output Flow rate (L/min) Cooling ability (KW/h) Cooling hydraulic pressure (KW) Input power (KW) Environment temperature (centi-degree ) Input oil temperature (centi-degree ) Automatically control temperature (centi-degree ) Noise (db) Weight (Kg) CE-10 M42*2 50-150 10-18 20-35 0.15 10-50 10-130 10-130 68 25 CE-15 M42*2 50-200 15-25 30-50 0.15 10-50 10-130 10-130 68 30 CE-20 M48*2 70-250 20-35 40-70 0.25 10-50 10-130 10-130 70 35 CE-25 M48*2 70-300 25-40 50-80 0.42 10-50 10-130 10-130 72 40 CE-35 M48*2 70-400 35-60 70-120 0.42 10-50 10-130 10-130 72 50 |
|
| » Posted by: Jiangyin ChuangDa Machinery Industry Co.,ltd [China] |
|
|
|
|
|
[Sell]
Choose The Best Flake Ice Machine |
|
|
| 1.5MR series equipment covers a wide range from 5MR-50 to 5MR-250F with producing 0.5 to 25 tons/day in thicknesses of 1 to 1.5mm. It's dry and loosen. 2.Compared to plate ice, flake ice has a large surface area which is good for rapidly cooling and holding low temperature. 3.Flake icemakers are all designed for indoor usage. Contact us for more information about outdoor models. 4.Flake icemakers are designed to operate solely with fresh water. If density of seawater exceeds 200ppm, the seawater flake ice machine is a better choice. |
|
| » Posted by: Qingdao Iceman Ice Machine Company [China] |
|
|
|
|
|
[Sell]
Flat panel solar(ISO) |
|
|
| Product Description Flat Plate/Panel Solar Collector;solar collector;Flat panel;Flat plate solar collectors;Flat plate(HE-F-SK) Product Description 1.Special design for oversea market.Special anodized aluminum alloy frame ensure handsome appearance and can bear high pressure without leakage. 2.Fiber glass insulation and EPDM seal strip to assure the solar collector can work under harsh and very cold temperature. 3.Tern tempered glass (4mm) or low-iron tempered glass (3.2mm) is not easy broken and with very high transmission and low emission to ensure high solar yields. 4.Eration temperature -33C to 120C |
|
| » Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China] |
|
|
|
|
|
[Sell]
China Sink Annealing Furnace |
|
|
| Welcome to visit jtfurnace dot com. Sink Annealing Furnace is used for stainless steel sink of bright annealing (solution) process. This product is derived from the continuous bright annealing furnace, its main structure has large-scale adjustment. Advantages: 1.Absorption of foreign advanced technology, optimizing the structure design. 2.Intelligent control stable highly effective, even hardness, stable organization. 3.Energy saving and high thermal efficiency, Uses safely and conveniently. 4.Simple operation, non-industrial pollution. 5.Advanced, reliable, practical and economical. Detailed product specifications, please visit our website jtfurnace com. And email to us jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
seamless carbon steel boiler tube |
|
|
| We are seamless carbon steel manufacturer from China,please view them and select the most helpful info for you. Besides, we also provide you with wall mount related products such as seamless steel pipe,steel pipe,oil pipe,casing pipe coupling material,oil casing. The seamless carbon boiler pipe we manufacture are widely applied in many industries such as chemical, boiler, geologic, construction, auto, engine, oil etc.The products have good precision sizes; uniform thickness; glabrous surface and good linearity. |
|
| » Posted by: Changzhou yuanyang steel tube Co.,Ltd [China] |
|
|
|
|
|
[Sell]
low price flat tooth |
|
|
| Alloy steel Body, made by material ASTM4142 or 42CrMo, heat treatment with 40-44HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working. The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed. |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Briquetting press |
|
|
| 1. pressing various kind of metal scrap, 2. full automatic, 3. with PLC control and patent, 4. high speed and stability. This machine can coldly compress powder and grain shaped cast steel chips, steel chips, sponge iron, copper chips and aluminum chips into column-shaped lump with a density of >5T/M3,PLC control with automatic material feeding, lump discharging and high efficiency. (containing no bonding reagents). The compressed lumps can substitute raw materials and be used directly. This type of machine is suitable for customers that handle moderate iron chip amount The output of each shift is 16 to 20ton. The model is fit for big amount ferrous chip. It gains three patents in the country and our main customers are in Asia area. This kind of machine is produced in China professionally Characteristics: 1. This machine applies a hydraulic drive with low noise. It is safe and reliable. 2. This machine applies a vertical framework structure, occupies small area and is safe and reliable. 3. PLC control with automatic material feeding, lump discharging and high efficiency. |
|
| » Posted by: Jiangyin ChuangDa Machinery Industry Co.,ltd [China] |
|
|
|
|
|
[Sell]
precision seamless steel tubes |
|
|
| The precision Seamless steel tubes we manufacture are widely applied in many industries such as chemical, boiler, geologic, construction, auto, engine, oil etc.We have many kinds of certificates and licenses for ISO9001-2000,API SPEC 5CT & API SPEC 5L, and approval of making tube for boiler and pressure vessel. We are brightness Seamless steel tube manufacturer from China,please view them and select the most helpful info for you. Besides, we also provide you with wall mount related products such as seamless steel pipe,steel pipe,Oil pipe,Casing pipe coupling material,oil Casing. |
|
| » Posted by: Changzhou yuanyang steel tube Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Four column hydraulic press |
|
|
| This hydraulic press series is suitable for compression process of materials, for example, punching, bending, side-turning and This hydraulic press series is suitable for compression process of materials, for example, punching, bending, side-turning and thin-sheet stretching. Besides, it can be also used for calibration and compression packing and molding of powder materials and compression molding of non-metal materials. This press series applies tow electrical control systems, that is, relay control and PLC control and three operation modes, that is, adjustment, manual and semi-automatic operation. It can realize two process modes of preset compression and preset stroke. When preset compression molding is applied, a delay and automatic back-stroking action is maintained after compression. Product characteristics: 1. It applies liquid-filling quick-action technology that doubles operation efficiency. 2. Three big beams apply integrated structure that guarantee the equipment quality and operation lifetime. 3. Two electrical control systems, that is, relay or PLC, can be selected for convenient operation of customers. |
|
| » Posted by: Jiangyin ChuangDa Machinery Industry Co.,ltd [China] |
|
|
|
|
|
[Sell]
Solar water heater work station |
|
|
| By the collector tube solar water heaters, storage tanks and related annexes, to rely mainly on solar energy into heat collector tubes. Collector surface by the sunlight, high temperature, collector tube rear sun surface temperature is low, while the pipe water temperature response arises, use cold water sinking floating principles, so that water will achieve the required micro-circulation of hot water.. |
|
| » Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China] |
|
|
|
|
|
[Sell]
solar water heater circulate pump |
|
|
| Hot water circulator is designed for home drinking water. Designed to be energy-saving and user convenience. Home heating system turned on and off the water pump and hot water temperature by hot water circulating device control components and accessories to achieve. Identification Code E.g. : RS 15/6 RS : Screwed-end pump 15/ : Connection size 6 : Rated shut-off head [m] |
|
| » Posted by: ChangZhou Nature Solar Energy Co.,LTD. [China] |
|
|
|
|
|
[Sell]
boiler steel pipe in china |
|
|
| Grade:10/20 Specification(mm):21.3-16*3-16 Standard:GB3087 Application: for low and medium pressure boiler, superheated vapor pipe, water boiler, and heating surface of water-tube boiler |
|
| » Posted by: Changzhou yuanyang steel tube Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Four column hydraulic press |
|
|
| This hydraulic press series is suitable for compression process of materials, for example, punching, bending, side-turning and This hydraulic press series is suitable for compression process of materials, for example, punching, bending, side-turning and thin-sheet stretching. Besides, it can be also used for calibration and compression packing and molding of powder materials and compression molding of non-metal materials. This press series applies tow electrical control systems, that is, relay control and PLC control and three operation modes, that is, adjustment, manual and semi-automatic operation. It can realize two process modes of preset compression and preset stroke. When preset compression molding is applied, a delay and automatic back-stroking action is maintained after compression. Product characteristics: 1. It applies liquid-filling quick-action technology that doubles operation efficiency. 2. Three big beams apply integrated structure that guarantee the equipment quality and operation lifetime. 3. Two electrical control systems, that is, relay or PLC, can be selected for convenient operation of customers. |
|
| » Posted by: Jiangyin ChuangDa Machinery Industry Co.,ltd [China] |
|
|
|
|
|
[Sell]
Seamless Steel tube in china |
|
|
| Changzhou yuanyang steel tube Co.,Ltd is a professional corporation for structural seamless steel pipe, which is located in eastern of Changzhou Jiangsu Province.We are steel pipe cleaning truck manufacturer from China,please view them and select the most helpful info for you. Besides, we also provide you with wall mount related products such as seamless steel tube,oil pipe,line pipe,casing pipe coupling material,oil casing. |
|
| » Posted by: Changzhou yuanyang steel tube Co.,Ltd [China] |
|
|
|
|
|
[Sell]
hydraulic paper baler |
|
|
| This machine is used for the packing of light foam types of materials such as plastic film and waste paper under the normal sta Detailed Product Description This machine is used for the packing of light foam types of materials such as plastic film and waste paper under the normal state. The material volumes are reduced dramatically and more materials can be stuffed into the same space, so as to achieve smaller transportation volume, save transportation cost and increase profit for the enterprises. Product Characteristics: 1. This machine applies hydraulic drive. It is convenient in installation, simple in operation and reliable in use. 2. The door is opened hydraulically to remove the package elasticity and discharge the package smoothly, which is safe and reliable. 3. This machine is equipped with a quick-action device. Its packing speed is one time higher than that of other equipment of the same type made by other manufacturers. The product is characterized by high working efficiency and low energy consumption and is suitable for repeated material charging and packing for light foam materials. |
|
| » Posted by: Jiangyin ChuangDa Machinery Industry Co.,ltd [China] |
|
|
|
|
|
[Sell]
China Continuous Carburization Furnace |
|
|
| Welcome to visit jtfurnace dot com. Continuous Carburization Furnace is for continuous carburizing quenching and tempering. Advantages: 1.Absorption of foreign advanced technology, optimizing the structure design. large capacity, easy maintenance. 2.Equipped with mixing fans. In the furnace the temperature atmosphere is even. 3.The atmosphere controls stably, the processing product organization is stable 4.Underneath the furnace side is equipped with the clear slag notch. 5.With emission and waste heat recovery agencies before the furnace. 6.Oil tank with the cold heat exchanger and filter, can control the oil temperature and ensure clean. 7.Washing machine is equipped with the oil-water separator and the strong dry winds system. 8.Tempering furnace heating elements have upper and lower sub-row design layout, with the mixing fans. 9.Products with low residual austenite, hardness uniform, bright and clean surface. Product specifications, please email to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 next»
|
|
|
