|
|
|
|
|
|
[Sell]
Low Pressure Rubber Hose |
|
|
FOR ALL YOUR COOLANT, VAPOR LPG, VACUUM, AND AIR CLEANER HOSE REQUIREMENTS All styles of hose may be supplied in bulk, or cut to custom lengths, with or without hose ends installed. When ordering custom length hoses, order by PART NUMBER-LENGTH IN INCHES. Example: The part number for an 18" length of 5/8" Vapor hose is H715-18. |
|
» Posted by: Huaxing Rubber Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
High Pressure Rubber Hose |
|
|
Hose cover does not have to be removed to attach non-skive fitting. Our High Pressure Hydraulic Hose offers high pressure service with petroleum based hydraulic fluids, hot oil, grease, lubricants, crude and fuel oils, air and water. This hose is constructed with a synthetic rubber tube, consisting of high tensile wire reinforcement, separated by a synthetic rubber layer. The synthetic rubber outer cover is oil, weather and abrasion resistant Temperature Range: -40?F to +200?F Fittings for Parker 301High Pressure Hose are available as either permanent crimp type or two-piece reusable. Please note that the crimp type fittings may be installed by CANAL RUBBER SUPPLY or consult us for the purchase of crimping machinery. Both permanent and reuseable fittings are available in a wide assortment and types for various hose and pipe thread sizes. Consult us for details . |
|
» Posted by: Huaxing Rubber Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Spiral Hydraulic Hose |
|
|
We offer light and flexible spiral hose made of synthetic rubber, used for suction of dust in vacuum cleaners. It is very flexible and easy to handle spiral hose, inside surface perfectly smooth, long lasting. Standard colors available for spiral hoses: White, grey, blue, black, silver and bronze. Available diameters and lengths: From 24mm to 63mm (inside diameter) Maximum lengths 25 m. Application: Flexible spiral hoses are especially suited for application to vacuum cleaners for industrial and household purposes. Different spiral hoses: Flexible spiral hoses from polyethylene, used for suction and transport of various liquids, suctions of swimming pools. Light and flexible spiral hose from polyethylene (EVA), used for suction of dust, mainly used for vacuum cleaners. Spiral hose which has the capacity to discharge static electricity. This full anti-static product is used to transport powders, granules, gas. Light and very flexible spiral hoses, stands high temperatures and chemical influences. Mainly used for steam cleaners. Spiral hoses from polypropylene, high temperature and chemical resistant. Used as outlet hose for washers, dishwashers |
|
» Posted by: Huaxing Rubber Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Pneumatic Rubber Hose |
|
|
The reliability of hydraulic and pneumatic systems depends partly upon the hoses and assemblies built in. JinShi supplies good quality air and pneumatic hoses of various sizes for customers. Uses: Pneumatic hoses are mainly used in air flow systems. Benefits of Using: Good flow, not easy to break, etc. Specifications: Various diameter and length can be provided. Can be supplied with hose assemblies. |
|
» Posted by: Huaxing Rubber Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Wire Braided Rubber Hoses |
|
|
Wire braided rubber hose is made of synthetic rubber and strengthened with wire braided fabrics. It usually consists of four or more layers including inner rubber layer, middle rubber layer, one or two or three steel wire braided layers and out rubber layers. With wire braided, this kind of hydraulic rubber hoses are mainly used in mine and oilfield exploitation, suitable for the construction, lifting transport, forging metallurgy, mining equipment, ships, injection molding machinery, agricultural machinery, machine tools, as well as various industrial sectors mechanization and automation of hydraulic transmission system in a certain pressure and temperature of the oil (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricants) liquid, water-based liquid (such as emulsion, the oil-water emulsion, water), such as gas and liquid transmission used. |
|
» Posted by: Huaxing Rubber Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Hydraulic Rubber Hose |
|
|
Our hydraulic hoses are available with single and double wire braided. These hoses are used for various purposes like suction and pressure lines in hydraulic system, streamlines, tier and moulding presses, chemical plants, petrochemical plants, fertilizers and refineries. It can be used in the temperature of 210? C. We engineer three types of hydraulic hoses: R1 Type This is used for hydraulic, air, lubricating oils and crude. It is oil resistant synthetic rubber available with single wire braided, oil and weather resistant rubber in the outer cover. R2 Type It is oil resistant rubber available with double wire braided, oil and weather resistant synthetic rubber outer cover. It is used for high-pressure hydraulics, which is subjected to high surge peaks. R3 Type This is used for hydraulics, crude, air and lubricating oil. It is oil resistant synthetic rubber, which is available with double textile-braided reinforcement, oil and weather resistant synthetic rubber that are in outer cover. |
|
» Posted by: Huaxing Rubber Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Discharge dredging hose services much longer |
|
|
Discharge dredging hose with customized steel flange Discharge dredging hose is often used to discharge bottom sediments in harbor and river construction and land reclamation. It is characterized by excellent resistance against high working pressure and seawater corrosion. Equipped with different flanges, this discharge dredge hose is available for diverse requirements. Ideal working temperature for this discharge hose is rated from -20 degrees Celsius to 70 degree Celsius. Reinforced by high tensile strength spring steel wire, this discharge dredging hose can withstand huge loads caused by outer environment. Abrasive outer layer has excellent resistance against ozone damage and chemical corrosion. Inner tube is fabricated by optimum NBR rubber for its outstanding abrasion resistance. Technical parameters: Inner tube: NBR Outer layer: NBR/CR Reinforcement: high tensile strength polymer Operating temperature: -20 to 70℃ (-4 to 158℉) Safety factor: 3:1 Discharge dredging hose structure Discharging hoses stored at a warehouse Item ID OD Working Pressure Bursting Pressure Vaccum Pressure Max. Length mm inch mm inch Mpa bar Mpa bar Kpa bar ft. meter DD-6 152 6 182 7-1/4 1.2 12 2.4 24 80 0.8 65.6 20 DD-8 203 8 233 9-1/5 1.2 12 2.4 24 80 0.8 65.6 20 DD-10 254 10 284 11-1/5 1 10 2 20 80 0.8 32.8 10 DD-12 304 12 340 13-2/5 1 10 2 20 80 0.8 19.68 to 32.8 6 to 10 DD-14 350 14 390 15-2/5 1 10 2 20 80 0.8 19.68 to 32.8 6 to 10 DD-18 450 18 486 19-1/5 0.7 7 1.5 15 80 0.8 19.68 to 32.8 6 to 10 DD-22 550 22 590 23-3/5 0.7 7 1.5 15 80 0.8 19.68 to 32.8 6 to 10 DD-24 600 24 640 25-3/5 0.7 7 1.5 15 80 0.8 19.68 to 32.8 6 to 10 DD-28 700 28 750 29-3/5 0.7 7 1.5 15 80 0.8 19.68 to 32.8 6 to 10 DD-32 800 32 850 33-1/2 0.5 5 1 10 80 0.8 19.68 to 32.8 6 to 10 DD-40 1000 40 1050 41-1/2 0.5 5 1 10 80 0.8 19.68 6 DD-48 1200 48 1250 49-1/5 0.5 5 1 10 80 0.8 19.68 6 DD-52 1300 52 1350 53-1/5 0.5 5 1 10 80 0.8 19.68 6
|
|
» Posted by: Octopus Dredge Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Floating hose with various dimensions for dredging pipelines |
|
|
Versatile floating hose does good job even on rough sea Floating hose has been increasingly used in cutter-suction dredge for land reclamation or transportation of oil and gas on the sea. Well abrasion-resistant discharge hose, closed PE foam cell and reinforced rubber shell contributes to a reliable floating hose. The inner hose is fabricated by SBR which has excellent resistance against abrasive materials and corrosive chemicals. Outer layer protects the hose from damage by sea water corrosion and ozone degradation. Foam is designed to provide buoyance and can withstand huge impact on rough sea. Features: Wear indicating layer Independent foam floating casing preventing water absorption Outer layer with excellent resistance of abrasion, UV, aging and corrosive environments Easy installation and less maintenance Customized steel flange are available. Specification: Inner layer: NBR and SBR Outer shell: NBR+CR Reinforcement: high tensile strength fabrics Ideal working temperature: -20 to 70℃ (-4 to 158℉) Safety factor: 3:1 Inner dia.: 25.6 to 39.4 inch Outer dia.: 49.61 to 70.87 inch Item Inner Diameter Outer Diameter Max. Length Bending Angle inch mm inch mm inch mm ? DF650 25.6 650 49.61 1260 464.57 11800 0?- 45? DF700 27.6 700 56.69 1440 464.57 11800 0?- 45? DF750 29.5 750 57.48 1460 464.57 11800 0?- 45? DF850 33.5 850 64.57 1640 464.57 11800 0?- 45? DF1000 39.4 1000 70.87 1800 464.57 11800 0?- 45? Notes: Excessive bending, severe impact and flange collision should be avoided when floating hose installed. Floating hose construction Floating hoses at store
|
|
» Posted by: Octopus Dredge Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Hose floats providing huge buoyance for dredging hoses |
|
|
Hose floats with easy installation and low maintenance costs Hose floats or pipe floats are accessories for all marine applications including dredging, mining and water treatment. Usually, half sections of pipe floats are bolted or strapped together around the hose or pipe to provide huge buoyance. Its hard and damage-resistant outer shell and a light, high-floatation closed cell ensure dredging pipe systems floating on the sea or river. Hose floats description: ?Material: Medium density polyethylene plastic ?Filling material: Polyurethane foam ?Color: Orange or as required Your benefit: ?Excellent resistance against weak acid, ultraviolet damage, ozone and marine corrosion ?Aging resistance and long durability ?Simple installation and low maintenance costs ?Small volume, light weight and huge buoyance High buoyance hose floats strapped together Bolted hose floats Item Inside Diameter Outside Diameter Length Thickness mm inch mm inch mm inch mm inch HF290 290 11.42 1000 39.37 1000 39.37 5 0.20 HF380 380 14.96 1000 39.37 1000 39.37 5 0.20 HF430 430 16.93 1200 47.24 1200 47.24 6 0.24 HF480 480 18.90 1300 51.18 1300 51.18 6 0.24 HF530 530 20.87 1300 51.18 1400 55.12 7 0.28 HF580 580 22.83 1400 55.12 1500 59.06 7 0.28 HF630 630 24.80 1450 57.09 1650 64.96 8 0.31 HF680 680 26.77 1500 59.06 1800 70.87 8 0.31 HF730 730 28.74 1600 62.99 1900 74.80 10 0.39 HF780 780 30.71 1700 66.93 1900 74.80 10 0.39 HF830 830 32.68 1800 70.87 2000 78.74 12 0.47 HF880 880 34.65 2000 78.74 2500 98.43 12 0.47
|
|
» Posted by: Octopus Dredge Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Suction dredging hose reinforced by spiral wire for loads |
|
|
Innovative suction dredging hose makes dredging process smoother With the development of dredging industry, capital dredging including creating a new harbor or waterway or to deepen existing facilities for larger ships access is extensively done all around the world. As an essential component of dredging, suction dredging hose plays a very important role with cutter suction dredge or large trailing suction hopper dredge. To guarantee the quality, ordinary galvanized wire has never been used for it can?t withstand high dynamic loads. Our reliable suction hose employs heavy spring steel to absorb impact roads caused by water wave. Large bore suction hose are equipped with rigid steel rings for flexible bending. ?Technical specifications: ?Inner tube: black EPDM/SBR synthetic rubber ?Outer layer: black EPDM/SBR synthetic rubber ?Reinforcement: multi-layer of high tensile-strength fiber, spiral steel wire reinforced ?Working temperature: -30 to 82℃ (-22 to 179.6℉)Safety factor: 3:1 Item ID OD Working Pressur Bursting Pressure Vacuum Pressure Max. Length mm inch mm inch Mpa bar Mpa bar Kpa bar ft. meter SDH-6 152 6 182 7-1/4 1.2 12 2.4 24 80 0.8 65.6 20 SDH-8 203 8 233 9-1/5 1.2 12 2.4 24 80 0.8 65.6 20 SDH-10 254 10 284 11-1/5 1 10 2 20 80 0.8 32.8 10 SDH-12 304 12 340 13-2/5 1 10 2 20 80 0.8 135906.8 19.68 to 32.8 SDH-14 350 14 390 15-2/5 1 10 2 20 80 0.8 135906.8 19.68 to 32.8 SDH-18 450 18 486 19-1/5 0.7 7 1.5 15 80 0.8 135906.8 19.68 to 32.8 SDH-22 550 22 590 23-3/5 0.7 7 1.5 15 80 0.8 135906.8 19.68 to 32.8 SDH-24 600 24 640 25-3/5 0.7 7 1.5 15 80 0.8 135906.8 19.68 to 32.8 SDH-28 700 28 750 29-3/5 0.7 7 1.5 15 80 0.8 135906.8 19.68 to 32.8 SDH-32 800 32 850 33-1/2 0.5 5 1 10 80 0.8 135906.8 19.68 to 32.8 SDH-40 1000 40 1050 41-1/2 0.5 5 1 10 80 0.8 19.68 19.68 SDH-48 1200 48 1250 49-1/5 0.5 5 1 10 80 0.8 19.68 19.68 SDH-52 1300 52 1350 53-1/5 0.5 5 1 10 80 0.8 19.68 19.68
|
|
» Posted by: Octopus Dredge Hose Co., Ltd [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber Platinum cured silicone rubber is a kind of FDA grade silicone, generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application Applications of platinum cured silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Advantage of platinum cured silicone rubber 1) Non-shrinkage (less than 0.1%) 2) high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 ) 4) high temperature resistant in 250 Centigrade Operation instruction of platinum cured silicone rubber Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly Step Two: vacuum pumping Without exception, this step takes less than 10 minutes Note: The time for vacuum-pumping should be less than 3-5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated Step Three: Pouring the mixture into the frame with original mold slowly Shelf life for silicon rubber for platinum cured mold 8~10months, when stored in a dry & cool place under the room temperature 25 Packing for silicon rubber for platinum cured mold 20kg/drum for part A+ 20kg/drum for part B in one set 200 kg/drum for part A+ 200kg/drum for part B in one set For more information, pls feel free to contact Ms harry Office no.: 0086-755-89948013 Mob: +8618938861896 Skype: smilingharry Email: hyst(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages: Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass, electroplating toys and trade makers and so on Pad Printing Silicon Rubber description Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface Pad Printing Silicon Rubber Features: High print times abrasion resistance Good printing effects Permanent and durable Pad Printing Silicon Rubber Operation Instructions: Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly Step Two: vacuum pumping Without exception, this step takes less than 10 minutes Note: The time for vacuum-pumping should be less than 3-5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated Step Three: Pouring the vacuumed mixture into the original mold slowly Shelf life for silicon rubber for pad printing 8~10months, when stored in a dry & cool place under the room temperature 25 Packing for silicon rubber for pad printing 20kgs/drum vacuumed packing For more information, pls feel free to contact Ms harry Office no. : 0086-755-89948013 Mob: +8618938861896 Skype: smilingharry Email: hyst(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd [China] |
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
|
|
Silicone rubber for concrete molds applications 1. Silicone rubber is mainly used for concrete statue, concrete veneer, concrete paving, concrete fountain, faux stone, man -made stone and all kinds of concrete products Silicone rubber for concrete molds features Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50 shore A after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6) resistance to acid-alkali and expansion Silicon rubber for concrete molds operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly Step Two: vacuum pumping Without exception, this step takes less than 10 minutes Note: The time for vacuum-pumping should be less than 3-5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold Shelf life for silicon rubber concrete molds 10~12months, when stored in a dry & cool place under the room temperature 25 Packing for silicon rubber for concrete molds 1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For more information, pls feel free to contact Ms harry Office no. : 0086-755-89948013 Mob: +8618938861896 Skype: smilingharry Email: hyst(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making applications 1.Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry 2.Silicon rubber for mold making is applicable for large statue Buddha, relieve, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3.Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50 shore A after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Brushing cast & Perfusion Molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25 Packing for silicon rubber for mold making 1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing 200 kg/drum For more information pls feel free to contact Ms harry Office no. : 0086-755-89948013 Mob: +8618938861896 Skype: smilingharry Email: hyst(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications 1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues, gypsum ceiling rose, gypsum columns, gypsum line, gypsum ceiling board, and all kinds of gypsum decorations. Liquid Silicone rubber for gypsum features Liquid Silicone rubber is two part silicone with general hardness of 22-50 shore A after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6) resistance to acid-alkali and expansion Liquid Silicone rubber for gypsum operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated Step Three: Pouring the mixture into the frame with original gypsum mold slowly Shelf life for Liquid Silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25 Packing for Liquid Silicone rubber 1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing 200 kg/drum For more information, pls feel free to contact Ms harry office no. : 0086-755-89948013 Mob: +8618938861896 Skype: smilingharry Email: hyst(at)szrl(dot)net Welcome to our website www dot szrl dot net
|
|
» Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50Aafter curing with features (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Brushing cast & Perfusion Molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For further information, pls contact with Miss Bonnie Skype:caroline71138 TEL: 0086-755-89948294 Mobile: 0086-18938867507 Mail : hyxb(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of translucent liquid ,generally named two-components silicone rubber with mixing in 1:1 .It?s mainly suitable for tire molds making . Advantage of platinum cure silicone rubber for tire mold 1)Non- shrinkage 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 ) 4)high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber for tire mold Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly. Step Two: vacuum pumping Without exception,this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise,once the silicone rubber has cross-link reaction during vacuum pumping process,it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months,when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A+ 20kg/drum for part B in one set ,200 kg/drum for part A+ 200kg/drum for part B in one set For further information, pls contact with Miss Bonnie Skype:caroline71138 TEL: 0086-755-89948294 Mobile: 0086-18938867507 Mail : hyxb(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Applications pad printing silicon rubber is applicable to the pringting of irregular patterns on plastic toys,electropalting products,trademarks,artworkgifts,and stationery,etc Pad Printing Silicon Rubber Features: 1) High print times 2) abrasion resistance. 3) Good printing effects 4) Permanent and durable Pad Printing Silicon Rubber Operation Instructions: . Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the vacuumed mixture into the original mold slowly, Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kgs/drum vacuumed packing For further information, pls contact with Miss Bonnie Skype:caroline71138 TEL: 0086-755-89948294 Mobile: 0086-18938867507 Mail : hyxb(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications 1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations . Liquid Silicone rubber for gypsum features Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Liquid Silicone rubber for gypsum operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original gypsum mold slowly . Shelf life for Liquid Silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for Liquid Silicone rubber 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For further information, pls contact with Miss Bonnie Skype:ccaroline71138 TEL: 0086-755-89948294 Mobile: 0086-18938867507 Mail : hyxb(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It is suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Advantage of platinum cure silicone rubber 1)Non- shrinkage (less than 0.1% ) 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 ) 4)high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part A+ 20kg/drum for part B in one set ,200 kg/drum for part A+ 200kg/drum for part B in one set For further information, pls contact with Miss Bonnie Skype:caroline71138 TEL: 0086-755-89948294 Mobile: 0086-18938867507 Mail : hyxb(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime .
|
|
» Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO LTD [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|