|
|
|
|
|
|
[Sell]
shower glass, shower tempered galss, shower safety glass |
|
|
Product name:Shower glass, shower tempered glass, shower safety glass Tempered glass is made by heating flat glass to approach its softening temperature and suddenly chilling it with juts of cold air, which produces highly desirable conditions of induced stress and results in additional strength, resistance to thermal stress, and impact resistance. Key words: shower glass, tempered glass Features of Tempered Glass 1.High Strength: 3-5 times stronger than ordinary annealed glass. 2.Safety: It will usually shatter into small fragments instead of sharp shards when broken, making it less likely to cause severe injury and deep lacerations. 3.High temperature: It can withstand a very wide range of rapid temperature change. Shower glass is typically made of tempered glass, giving that Glass Types Flat, curved and J-bend Clear, tinted, patterned/textured, and low iron glass. Surface treatment such as clear-shielding is available as well Specifications Flat tempered glass: Thickness: 3mm-12mm Maximum size: 3600mmX2400mm Minimum size: 400mm¡Á400mm Curved tempered glass: Thickness: 3-6mm thickness: Maximum length: 2000mm; Maximum radius: 1000mm; Minimum radius: 450mm Maximum arc length: 1000mm Minimum arc length: 260mm 8-10mm thickness: Minimum radius: 800mm Minimum arc length: 350mm J-bend tempered glass: Thickness: 5-8mm Maximum length/width: 1450mm Minimum radius: 110mm; Height: 2400mm Tolerances Size tolerance: +/-1.0mm Hole position tolerance: +/-1.0mm Hole diameter tolerance: +/-0.5mm Glass thickness tolerance: +/-0.3mm Processing Cutting glass ¡úEdgework polishing ¡ú Drilling holes ¡úNotching¡ú Cleaning ¡úScreen printing ¡ú Tempering ¡ú Packaging ¡ú Loading ¡ú ?Standards Europe: EN 12150 America: ANSI Z97.1 Australia: AS/NZS 2208 Packaging Wooden crates Cardboard Contact us Linkan Limited Tel: +86 756 2170770 Fax: +86 756 2170771 Email: info@linkan-sourcing.com Web: www.linkan-sourcing.com |
|
» Posted by: Linkan Limited [Afghanistan] |
|
|
|
|
|
[Sell]
shower tempered glass, toughened glass, shower safety glass |
|
|
Shower glass, shower tempered glass, safety glass Tempered glass is made by heating flat glass to approach its softening temperature and suddenly chilling it with juts of cold air, which produces highly desirable conditions of induced stress and results in additional strength, resistance to thermal stress, and impact resistance. Features of Tempered Glass 1.High Strength: 3-5 times stronger than ordinary annealed glass. 2.Safety: It will usually shatter into small fragments instead of sharp shards when broken, making it less likely to cause severe injury and deep lacerations. 3.High temperature: It can withstand a very wide range of rapid temperature change. Glass Types Flat, curved and J-bend Clear, tinted, patterned/textured, and low iron glass. Surface treatment such as clear-shielding is available as well Specifications Flat tempered glass: Thickness: 3mm-12mm Maximum size: 3600mmX2400mm Minimum size: 400mm¡Á400mm Curved tempered glass: Thickness: 3-6mm thickness: Maximum length: 2000mm; Maximum radius: 1000mm; Minimum radius: 450mm Maximum arc length: 1000mm Minimum arc length: 260mm 8-10mm thickness: Minimum radius: 800mm Minimum arc length: 350mm J-bend tempered glass: Thickness: 5-8mm Maximum length/width: 1450mm Minimum radius: 110mm; Height: 2400mm Tolerances Size tolerance: +/-1.0mm Hole position tolerance: +/-1.0mm Hole diameter tolerance: +/-0.5mm Glass thickness tolerance: +/-0.3mm Processing Cutting glass ¡úEdgework polishing ¡ú Drilling holes ¡úNotching¡ú Cleaning ¡úScreen printing ¡ú Tempering ¡ú Packaging ¡ú Loading ¡ú Shipping Standards Europe: EN 12150 America: ANSI Z97.1 Australia: AS/NZS 2208 Packaging Wooden crates Cardboard Contact us Linkan Limited Tel: +86 756 2170770 Email: info@linkan-sourcing.com Web: www.linkan-sourcing.com |
|
» Posted by: Linkan Limited [Afghanistan] |
|
|
|
|
|
[Sell]
SPF Hem-fir Doug-fir Pine Red & Yellow Cedar |
|
|
We can supply any North American Softwood in custom size or order for: -------------------------------------------------- 1. Door Frame & Parts 2. Window Frame & Parts 3. Furniture Wood - Custom Sizes Only 4. Joinery Wood 5. Wood Treatment: CCA, Wolman Salts, etc -------------------------------------------------- Please Contact Us: Suren Rai Tel: 1-778-878-6000 E-mail: ajrai@shaw.ca Skype: rai.of.bc |
|
» Posted by: Pacific Sawmills Ltd [Canada] |
|
|
|
|
|
[Sell]
DC-82R shower trays;shower trays; shower bases |
|
|
Product name:DC-82R shower trays;shower trays; shower bases Origin: China HS Code: 39221000 Production Capacity: 100,000pcs per month MOQ: 300pcs Shower tray Size: 800x800x330MM 900x900x330MM 1000x1000x330MM Shower tray material: 1. ABS Acrylic, 2. stone resin, 3. stone resin tray with foam filling 4. SMC, 5. Marble & natural stone. Shower tray Description: 1. Color: All colors shower tray are available 2. Delivery time: 20-30days after receiving the deposit 3. All can be with panel/apron or feet system as you request 4. Shower tray packing: Carton inside, wooden pallet outside, then wrapped in plastic film, Standard export packing or custom designed packing 8. We also offer OEM service; we can change material and design according to your requests Please feel free to contact me for further information. |
|
» Posted by: Linkan Limited [Afghanistan] |
|
|
|
|
|
[Sell]
BF-309 shower; glass shower room; shower enclosures |
|
|
Detailed Description Product name: BF-309 shower;glass shower room;China Shower Room Place of Origin: China, Glass Thickness: 4-12mm Dimension: W (1300-1800) and 1900mm Customization available Glass colors available: Clear, frosted, silk print design, rain veins and so on Material: Tempered glass, aluminum profile Aluminum frame: Anodizing, Powder Coating, Chrome Plating Frame Style: with frame or frameless Open Style: Sliding or swing Frame Surface Finishing: Matt silver, sand silver or polished aluminum Slide wheel: Double wheels; are available, which is more stable and silence Handles: Many shapes and style are available. Tray Material: ABS, Stone Resin, SMC, Marble & Natural Stone Tray Shape: Sector or Square, Rectangle, Quadrant, Offset Quadrant, Pentangle Packaging Detail: Foam paper with carton and wooden frame if necessary Lead time: 25-30 days when receive deposit. It depends on the quantity Payment: T/T 30% deposit before production, 70% balance payment by T/T Features: Frameless or frame style, 6mm thickness glass, chrome bright finish aluminum profiles, plastic magnetic strip, handle, hinged door, support bar; Option: Shower tray, wood cushion. |
|
» Posted by: Linkan Limited [Afghanistan] |
|
|
|
|
|
[Sell]
BD-309 shower enclosures; shower rooms; sliding shower door |
|
|
Detailed Description Product name:BD-309 shower enclosures;shower rooms;shower doors Place of Origin: China, Glass Thickness: 4-12mm Dimension: W (1300-1800) and 1900mm Customization available Glass colors available: Clear, frosted, silk print design, rain veins and so on Material: Tempered glass, aluminum profile Aluminum frame: Anodizing, Powder Coating, Chrome Plating Frame Style: with frame or frameless Open Style: Sliding or swing Frame Surface Finishing: Matt silver, sand silver or polished aluminum Slide wheel: Double wheels; are available, which is more stable and silence Handles: Many shapes and style are available. Tray Material: ABS, Stone Resin, SMC, Marble & Natural Stone Tray Shape: Sector or Square, Rectangle, Quadrant, Offset Quadrant, Pentangle Packaging Detail: Foam paper with carton and wooden frame if necessary Lead time: 25-30 days when receive deposit. It depends on the quantity Payment: T/T 30% deposit before production, 70% balance payment by T/T Features: Frameless or frame style, 6mm thickness glass, chrome bright finish aluminum profiles, plastic magnetic strip, handle, hinged door, support bar; Option: Shower tray, wood cushion. |
|
» Posted by: Linkan Limited [Afghanistan] |
|
|
|
|
|
[Sell]
www.cheapcigarette.cc L&M Blue Pack cigarettes |
|
|
welcome to www.cheapcigarette.cc Newport Classic full flavor cigarettes were promoted for many years as a cigarette that allows you to "Enjoy a full flavor menthol, without drowning out pure tobacco taste." In the mid 1980s, Newport began an advertising campaign that courted African Americans in urban areas. In two years, Newports became the fifth most popular cigarette on the market. A 2004 study by the Robert Wood Johnson Foundation found that the percentage of teen Newport smokers doubled between 1989 and 1996. Researcher Karen Gerlach indicated that Newports made the most significant progress with the Hispanic and White American teen markets in those years. www.cheapcigarette.cc |
|
» Posted by: www.cheapcigarette.cc [China] |
|
|
|
|
|
[Sell]
FRP PIN |
|
|
Zhongyi FRP Co.,Ltd. offers the best pins on the market. Our pultruded fiberglass pins feature 7,050 psi. shear strengths and gives you time-saving design innovations and construction techniques. Zhongyi pins are available in both shouldered and non-shouldered designs. The new design to the shouldered pins takes a great leap ahead of competing products with a rock-solid, injection molded cap that is tapered for ease of installation. These pins are “stamped” with our seal of approval, ensuring our commitment to excellence and offering the highest quality products on the market. Our company, Zhongyi FRP Co., Ltd. is a leading FRP manufacturer in China, we supply wide variety of fiberglass products including pultruded profiles, rod, pins ect. We have been supplying the fiberglass pins for the American market for nine years, we hope we could have opportunity to work with you with our experience , competitive price and quality product, below is our specification for your information. Short Beam Shear Strength per ASTM D4475-02, Span:3:1. Tested result: mean 7788 psi range 7520- 8254 psi Flexural Strength as per ASTM D-4476. Tested result: mean 143106 psi range 138201-156563 psi Flexural Modulus as per ASTM D-4476. Tested result :mean :4360 ksi range: 4305-4732 ksi Specific Gravity as per ASTM D-570 Tested result: mean 2.02 range : 1.95-2.05 Water Absorption as per ASTM D-570. Tested result: mean 0.065 range 0.06-0.079 We could provide fiberglass pins sample to you if you need ,and we could make it to according to your requirement.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
FRP PIN |
|
|
Zhongyi FRP Co.,Ltd. offers the best pins on the market. Our pultruded fiberglass pins feature 7,050 psi. shear strengths and gives you time-saving design innovations and construction techniques. Zhongyi pins are available in both shouldered and non-shouldered designs. The new design to the shouldered pins takes a great leap ahead of competing products with a rock-solid, injection molded cap that is tapered for ease of installation. These pins are “stamped” with our seal of approval, ensuring our commitment to excellence and offering the highest quality products on the market. Our company, Zhongyi FRP Co., Ltd. is a leading FRP manufacturer in China, we supply wide variety of fiberglass products including pultruded profiles, rod, pins ect. We have been supplying the fiberglass pins for the American market for nine years, we hope we could have opportunity to work with you with our experience , competitive price and quality product, below is our specification for your information. Short Beam Shear Strength per ASTM D4475-02, Span:3:1. Tested result: mean 7788 psi range 7520- 8254 psi Flexural Strength as per ASTM D-4476. Tested result: mean 143106 psi range 138201-156563 psi Flexural Modulus as per ASTM D-4476. Tested result :mean :4360 ksi range: 4305-4732 ksi Specific Gravity as per ASTM D-570 Tested result: mean 2.02 range : 1.95-2.05 Water Absorption as per ASTM D-570. Tested result: mean 0.065 range 0.06-0.079 We could provide fiberglass pins sample to you if you need ,and we could make it to according to your requirement.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
FIBERGLASS PIN |
|
|
Zhongyi FRP Co.,Ltd. offers the best pins on the market. Our pultruded fiberglass pins feature 7,050 psi. shear strengths and gives you time-saving design innovations and construction techniques. Zhongyi pins are available in both shouldered and non-shouldered designs. The new design to the shouldered pins takes a great leap ahead of competing products with a rock-solid, injection molded cap that is tapered for ease of installation. These pins are “stamped” with our seal of approval, ensuring our commitment to excellence and offering the highest quality products on the market. Our company, Zhongyi FRP Co., Ltd. is a leading FRP manufacturer in China, we supply wide variety of fiberglass products including pultruded profiles, rod, pins ect. We have been supplying the fiberglass pins for the American market for nine years, we hope we could have opportunity to work with you with our experience , competitive price and quality product, below is our specification for your information. Short Beam Shear Strength per ASTM D4475-02, Span:3:1. Tested result: mean 7788 psi range 7520- 8254 psi Flexural Strength as per ASTM D-4476. Tested result: mean 143106 psi range 138201-156563 psi Flexural Modulus as per ASTM D-4476. Tested result :mean :4360 ksi range: 4305-4732 ksi Specific Gravity as per ASTM D-570 Tested result: mean 2.02 range : 1.95-2.05 Water Absorption as per ASTM D-570. Tested result: mean 0.065 range 0.06-0.079 We could provide fiberglass pins sample to you if you need ,and we could make it to according to your requirement.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
GRP PULTRUDED |
|
|
Zhongyi FRP Co., Ltd supplies a wide range of FRP pultrusion profiles including beams, angles,rods, tubes, flatsheets and dog bones etc, which are an ideal substitute for steel and conventional metal in applications where weight, strength, corrosion resistance and UV resistance are of paramount concern. FRP profiles are widely used in constructing small platforms in chemical plants , bridges and platforms, pipe supports, slide guides and weir plates. These structural profiles are used for structural supports and assembled into functional components like staircases, handrails, ladders, etc. Advantage of FRP profiles: High Strength Corrosion Resistant to many chemicals Light Weight- Weighs nearly 80% less than a steel profile of similar dimension. Electrically Non-Conductive Non-Metallic Flame Retardant: Fire Retardant Polyester and Vinylester Resin Series both exhibit flame spreads of 25 or less when tested per ASTM E-84 Lower Life Cycle Cost Non-Leaching. Environmentally Friendly Dimensional Stability
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
FRP PULTRUDED |
|
|
Zhongyi FRP Co., Ltd supplies a wide range of FRP pultrusion profiles including beams, angles,rods, tubes, flatsheets and dog bones etc, which are an ideal substitute for steel and conventional metal in applications where weight, strength, corrosion resistance and UV resistance are of paramount concern. FRP profiles are widely used in constructing small platforms in chemical plants , bridges and platforms, pipe supports, slide guides and weir plates. These structural profiles are used for structural supports and assembled into functional components like staircases, handrails, ladders, etc. Advantage of FRP profiles: High Strength Corrosion Resistant to many chemicals Light Weight- Weighs nearly 80% less than a steel profile of similar dimension. Electrically Non-Conductive Non-Metallic Flame Retardant: Fire Retardant Polyester and Vinylester Resin Series both exhibit flame spreads of 25 or less when tested per ASTM E-84 Lower Life Cycle Cost Non-Leaching. Environmentally Friendly Dimensional Stability
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
GRP GRATING |
|
|
FRP gratings are manufactured with the RTM technology, using polyester resins reinforced with glassfibres. The gratings are designed with a high “safety factor” and manufactured under strict inspections; they are supplied with antiskid surface "meniscus type" . On demand they can be supplied with the following characteristics: • fire resistant (according to several norms) • with covered surface • antiskid with quarz sand • flat surface Different thermosetting resins (isophtalic, vynilester or other resins) are available accordingly to the speicific installation enviroment. They are mainly used as gangways, trench covers, scrubber gratings, electrical protection panels, steps and others.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
FRP GRATING |
|
|
FRP gratings are manufactured with the RTM technology, using polyester resins reinforced with glassfibres. The gratings are designed with a high “safety factor” and manufactured under strict inspections; they are supplied with antiskid surface "meniscus type" . On demand they can be supplied with the following characteristics: • fire resistant (according to several norms) • with covered surface • antiskid with quarz sand • flat surface Different thermosetting resins (isophtalic, vynilester or other resins) are available accordingly to the speicific installation enviroment. They are mainly used as gangways, trench covers, scrubber gratings, electrical protection panels, steps and others.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
GRP FITTING |
|
|
Zhongyi FRP Co., Ltd manufactures filament wound pipe, pipe fittings and flanges of different diameter in accordance with standards published by ASTM, ANSI, AWWA, ASME . Pipe, pipe fittings and flanges are manufactured from corrosion resistant epoxy vinyl ester, polyester, isophthalic resins. Pipes & ducts Pipes & ducts are manufactured using the "Dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall. Nominal diameter Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm. Nominal pressure classes: Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions Nominal lengths Pipes have a length of six meters up to ND150 and 12 meters for bigger diameters. Fittings A wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface Prefabrication spools Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
FRP FITTING |
|
|
Zhongyi FRP Co., Ltd manufactures filament wound pipe, pipe fittings and flanges of different diameter in accordance with standards published by ASTM, ANSI, AWWA, ASME . Pipe, pipe fittings and flanges are manufactured from corrosion resistant epoxy vinyl ester, polyester, isophthalic resins. Pipes & ducts Pipes & ducts are manufactured using the "Dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall. Nominal diameter Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm. Nominal pressure classes: Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions Nominal lengths Pipes have a length of six meters up to ND150 and 12 meters for bigger diameters. Fittings A wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface Prefabrication spools Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
GRP PIPE |
|
|
Zhongyi FRP Co., Ltd manufactures filament wound pipe, pipe fittings and flanges of different diameter in accordance with standards published by ASTM, ANSI, AWWA, ASME . Pipe, pipe fittings and flanges are manufactured from corrosion resistant epoxy vinyl ester, polyester, isophthalic resins. Pipes & ducts Pipes & ducts are manufactured using the "Dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall. Nominal diameter Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm. Nominal pressure classes: Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions Nominal lengths Pipes have a length of six meters up to ND150 and 12 meters for bigger diameters. Fittings A wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface Prefabrication spools Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
FRP PIPE |
|
|
Zhongyi FRP Co., Ltd manufactures filament wound pipe, pipe fittings and flanges of different diameter in accordance with standards published by ASTM, ANSI, AWWA, ASME . Pipe, pipe fittings and flanges are manufactured from corrosion resistant epoxy vinyl ester, polyester, isophthalic resins. Pipes & ducts Pipes & ducts are manufactured using the "Dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall. Nominal diameter Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm. Nominal pressure classes: Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions Nominal lengths Pipes have a length of six meters up to ND150 and 12 meters for bigger diameters. Fittings A wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface Prefabrication spools Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.
|
|
» Posted by: ZHONGYI FRP CO.,LTD. [China] |
|
|
|
|
|
[Sell]
Seamless steel pipe for fluid service |
|
|
1) Product name: Seamless steel pipe for fluid service 2) Standard: ASTM A53-2007, API 5L 3) Grade: 10#, 20#, 45#, Q345, Q195, Q215 4) Outer Diameter: 0.875 - 18 inch 5) Thickness: 0.035 - 0.875 inch 6) Length:Random 7)Technique: Cold Drawn 8) Certification:API 9) Pipe End: Plain, beveled 10) Pipe surface: black phosphated, oiled, or as customer's request. 11)Application:Used for oil and gas fluid transfer. 12) Place of Origin:China (Mainland) 13) Supply Ability: 8000 Metric Tons / Month 14) MOQ: 20 Metric Ton 15) FOB price: USD 480~900 / Metric Ton 16) Payment Terms: T/T or L/C 17) Delivery Time: 25-35 days after receipt of L/C 18) Packing: packed with several steel strips, wrapped in waterproof paper.19) Steel Grade: API 5L: A, B, X42,X46, X52, X60, X65, X70, X80 A 53 Gr. A Gr.B ASTM A106: Gr A, Gr B, Gr C DIN 1629:St 37.0, St 44.0, St 52.0 DIN 17175: St 35.8, St 45.8, 17Mn4, 17Mn5, 15Mn5, 15Mo3, 13GrMo910. Quality Standard: GB/T9711 Petroleum and natural gas industries--Steel pipe for pipelines GB/T3091 Welded steel pipe for low pressure liquid delivery BS: 1387 Steel Tubes for use for Water, Gas, Air and Steam ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded EN10217 Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties |
|
» Posted by: Threeway Steel Co., Ltd [China] |
|
|
|
|
|
[Sell]
Hot dipped galvanized scaffolding tube |
|
|
Application: electrical towers and household appliances, the body of heavy vehicles, material storage racks, pallets, hydraulic platforms, trusses, columns, purlins, greenhouse stands towers, Agricultural Equipment, Feature: a tough uniform zinc coating corrosion resistance provides long-term protection Specification: 1)Outer Diameter: 38-48.6mm 2)Wall Thickness: 2-4mm 3)Length: 0.3-18 meter, standard length is 6 meter. Detailed Description: 1) Product name: Hot dipped galvanized scaffolding tube 2) Standard: BS 1139, BS EN 39, JIS G3444-2006, ASTM A53-2007 3) Grade: Q235B, Q345B, S235JR, S275JR 4)Technique: ERW 5) Certification:API 6) Pipe End: Square cut, Burr removed 7) Pipe surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black 8) Place of Origin:China (Mainland) 9) Supply Ability:5000 Metric Tons / Month 10) MOQ: 20 Metric Ton 11) FOB price: USD 700-870 / Metric Ton 12) Payment Terms: T/T or L/C 13) Delivery Time: within 35 days after receipt of L/C 14) Packing: in bundles with several steel strips, as customer's request
|
|
» Posted by: Threeway Steel Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 next»
|
|
|