|
|
|
|
|
|
|
[Sell]
sell Quality Fiberglass Geogrid |
 |
|
| Fiberglass geogrid is a new excellent material used for reinforcing road surface and base, it made by fiberglass filament, and covered by special solution. High longitudinal and horizontal strength, low elongation rate, anti-alkali and aging resistance, widely used in asphalt road surface, concrete road surface and reinforcing road base. |
|
» Posted by: Hebei HuaAn Geogrid Co., Ltd. [China]  |
|
|
|
|
|
[Sell]
Rose oil |
|
|
Rose oil is one of national treasures of Bulgaria. The Essential Oil of Rose is extracted by steam distillation of fresh Damascus Rose (Rosa Damascena, as it is known among botanists). The most important characteristic of Bulgarian rose oil is its aroma. The aroma of the rose oil is a result of a harmony of more than 265 elements in a unique combination.
The proportion of these components is recognized as UNIQUE and based on this there was issued an ISO certificate for Bulgarian Rose Oil. The most important components from these 265 are Citronelol, Geraniol and Nerol. The unique aroma of the Bulgarian rose oil was chosen for a major modification element of the aroma of the most famous perfume brands as „Nina Ricci", "Chanel", „Christian Dior", "Kenzo" etc.
|
|
» Posted by: Vesselino Ltd. [Bulgaria]  |
|
|
|
|
|
[Sell]
Waterproof IP Camera (PUB-V901-Z) |
|
|
| Monitor IP Camera,IP Monitor Camera,IP Camera Monitor, Waterproof IP Camera, Outdoor IP Camera Model No.: PUB-V901-Z New Feature: 1): Supporting 3x Optical Zoom 2): 4" compact design 3): Iphone APP downloadable 4): Support Gmail/Hotmail function 5):8 preset positions monitoring 6): Free DDNS for Remote viewing 7): Freely control alarm sound ON/OFF 8): Freely control alarm record ON/OFF 9):More than 14 languages for worldwide users 10): Support VLC mode 11): Support MSN feature Basic Feature: > MJPEG video compression format > Support two-way audio function > Freely control upload image to FTP > Freely control Pan/Tilt angle by software > Freely control Pan/Tilt speed by software > Support up to 9 users online simultaneously > Motion detection alert with snapshots via email > Allow remote view & record from anywhere anytime > Multi-level user management with password protection > Support Mobile phone login from User Interface via browser directly > Support IE, Safari, Firefox, Google chrome browser or any other standard browsers Specification: Model: PUB-V901-Z Image Sensor Image Sensor 1/4" Color CMOS Sensor Display Resolution 640 x 480 Pixels(300k Pixels) Lens 3x Optical Zoom(4mm-9mm) Mini. Illumination 0.5Lux, F2.0 Lens Type Glass Lens Viewing Angle 30.7~ 69 Audio Input 1 channel audio input Output 1 channel audio output Audio Compression ADPCM Video Image Compression MJPEG Image Frame Rate 15fps(VGA),30fps(QVGA) Resolution 640 x 480(VGA), 320 x 240(QVGA) Flip Mirror Images Vertical / Horizontal Light Frequency 50Hz, 60Hz, Outdoor Video Parameters Brightness, Contrast Communication Ethernet Interface 10Base-T/100Base-TX Ethernet Port Supported Protocol TCP/IP,DHCP,SMTP,HTTP,DDNS,UPNP,PPPoE,FTP,DNS Physical Pan/Tilt Angle Horizontal:355 & Vertical: 90 Alarm Input 1 Channel on/off Input |
|
| » Posted by: SOUTH EAST (ASIA) LIMITED [China] |
|
|
|
|
|
[Sell]
Wire Mesh Filter |
|
|
Wire mesh filter has a greater number of finer wires in the shute direction and is woven in both plain and twill weave patters. It is normally rated by the size particle it will retain, either as the absolute micron rating or the nominal micron rating, expressed in microns.
We normally use stainless steel woven mesh 304, 304L, 316, 316L as filter media in the patterns of plain, twilled, dutch weave to achieve full range of aperture and properties.
Characteristic: filter wire cloth has excellent anti-wear property, heat-resistance and acid, corrosion resistance.
Applications: filter wire cloth is utilized as filter fittings for chemical industry, medicine, petroleum, telecommunication, scientific research units etc. |
|
| » Posted by: Hebei Siyang Filter Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Box IP Camera (PUB-VH501-WS) |
|
|
| HD IP Camera, IP Camera HD,IP HD Camera, Box IP Camera, Outdoor IP Camera Model No.: PUB-VH501-WS New Feature: 1): Support Gmail/Hotmail function 2): Support SD-Card up to 32GB. 3): Free DDNS for Remote viewing 4): Freely control alarm sound ON/OFF 5): Freely control alarm record ON/OFF Basic Feature: > H.264 video compression format > SD2.0 standard, maximum storage 32GB > Built-in Microphone > Support two-way audio function > Freely control upload image to FTP > Support up to 9 users online simultaneously > Motion detection alert with snapshots via email > Allow remote view; record from anywhere anytime > Multi-level user management with password protection > Wi-Fi compliant with wireless standards IEEE 802.11b/g/n > Support both WEP; WPA WPA2 encryption for wireless > Support Mobile phone login from User Interface via browser directly > Support IE, Safari, Firefox, Google chrome browser or any other standard browsers Specification: Model:PUB -VH50-WS Image Sensor Image Sensor 1/4" Micron CMOS Progressive Scan CMOS Display Resolution 640 x 480 Pixels(300k Pixels) Lens f: 6mm Mini. Illumination 0.5Lux Lens Lens Type Glass Lens Viewing Angle 60 Degree Audio Input Built-in Microphone/1 channel audio input Output 1 channel audio output Audio Compression ADPCM Video Image Compression H.264, MJPEG Image Frame Rate 30fps(VGA),30fps(QVGA) Resolution/Frame Rate 640 x 480(VGA), 320 x 240(QVGA) Flip Mirror Images Vertical / Horizontal Light Frequency 50Hz, 60Hz, Outdoor Video Parameters Brightness, Saturation , Contrast ,Hue Communication Ethernet Interface Build in 10/100Mbps,Auto MDI/MDIX , RJ-45 Supported Protocol TCP/IP HTTP DNS DHCP PPPoE SMTP FTP SSL TFTP NTP ARP/RARP NFS RTSP RTP RTCP. Compress rate level 128Kbps~16Mbps Wireless Standard IEEE 802.11b/g/n Data Rate 802.11b: 11Mbps (Max.), 802.11g: 54Mbps (Max.), 802.11n: 150Mbps (Max.) Wireless Security WEP & WPA WPA2 Encryption Physical Alarm Input |
|
| » Posted by: SOUTH EAST (ASIA) LIMITED [China] |
|
|
|
|
|
[Sell]
Griffin 2 USB Car Charger New original |
|
|
| Brand Name Griffin 2 USB Car Charger New original Model Griffin Quality New original Quality ControlTested and Available The product is directly from the original purchase directly, and sold to domestic and worldwide. 1: Quality Control: All products must pass the inspection of our professional QC team; 2: Delivery Time: Lead time usually within 3 days; 3: Payment Terms: T/T,Western Union, Paypal and Cash; 4: Product Warranty : 90 days, we will have good after-sales services; 5: Product Model: We can offer all kinds of spare parts for Mobile Phone, GPS,PDA,Laptop and so on; 6: Product Package: All produces will be packaged with Anti-static bag and foam box or plastic bag and foam box. If you have any questions, Please feel free to contact us,we will try our best to help you on time. We are looking forward to hearing from you all the time. |
|
| » Posted by: Wisdom Reaching Industrial(HK)Limited [China] |
|
|
|
|
|
[Sell]
RTV Silicone rubber HY638 for concrete casting |
|
|
Usage:
RTV Silicone rubber HY638 is most suitable for concrete castings, cement statue, concrete pavers, GRC cement products, etc. with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc.
It is suitable for large products with detailed pattern, which is difficult to demould.
This silicone rubber is one of the products with the highest use level in the production of concrete castings and the shrinkage is up to 0.2%.
Description: 　　
RTV-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance.
Add curing agent of 2%~5% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.
Standard datasheet:
Model appearance viscosity (cps): 20000~26000
Hardness (shore A): 32~36
Tensile Strength (Kgf/cm2):45~51
Tear strength (Kgf/㎝): 20~25
Elongation (%) ≧500
Mixing ratio (%):2~3
Operating time (h): 0.5
Curing time (h):2~4
Operation instruction for RTV-2 silicone rubber HY638#:　　
The product is white or red flowing liquid with general hardness of 22~50 shore A after curing.
If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness.
On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness.
The amount of the curing agent depends on the actual requirements of the customer.
If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
Notes:
We do not recommend adding silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%~10% silicone oil can be added to soften the mold for easy demould.
The proportions and reactions of the curing agent and the silicon are listed as follows: 　　
Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours. 　　
Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours. 　　
Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.
Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded.
Any further information pls feel free to contact with Ms Alice ( Sales Director)
Shenzhen Hong Ye Jie Technology Co., Ltd. |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Silicone rubber for mold making |
|
|
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicone rubber for mold making description
Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030
Mobile: 0086-13510188049
E-mail: alice(at)szrl(dot)net
Website: www(dot)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicone Rubber |
|
|
Pad printing silicone :
1. resistance to deformation, high-temperature
2. high printing times
3. good aging resistance
4. exceptional elasticity
5 great printing effect
Pad Printing Silicone Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
.
Pad Printing Silicone Rubber Operation Instructions:
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.
.
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030 |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Manual Molding Silicone Rubber |
|
|
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc.
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030
Mobile: 0086-13510188049
E-mail: alice(at)szrl(dot)net
Website: www(dot)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Silicone rubber for mold making |
|
|
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030 |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Addition cure silicone rubber for making molds |
|
|
1. Brief description of Addition cure silicone rubber :
Addition cure silicone rubber is with the all the advantage of rtv-2 condensation cure silicone rubber, but is also featured with lower shrinkage and low viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously, so it will be deeply-cured. The E sereise addition cure silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it's very suitable for all kinds of mold with a variety of sizes, shapes and large sized plaster, cement,ect molds making.
2. Addition cure silicone rubber applications:
Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making, life casting, medical catheter and so on.
3. Addition cure silicone rubber features:
a)Two-component silicone rubber with platinum catalyst
b)With high transparency, tensile strength, and tear strength.
c)Nontoxic & reach to Food grade
d)With good heat stability and weatherability ( temperature resistant range of -60~250 C)
e)With heat-ageing resistance
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030
Mobile: 0086-13510188049
E-mail: alice(at)szrl(dot)net
Website: www(dot)szrl(dot)net |
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Wireless IP Camera (PUB-V802-WS) |
|
|
| Internet IP Camera, internet network camera, internet surveillance camera, Wireless IP Camera Security IP Camera. Model No.: PUB-V802-WS New Feature: 1): Iphone APP downloadable 2): Support Gmail/Hotmail function 3): 15 preset positions monitoring 4): Free DDNS for Remote viewing 5):Freely control alarm sound ON/OFF 6): Freely control alarm record ON/OFF 7): Up to 13 languages for worldwide users 8): Support VLC mode 9): Support MSN feature Basic Feature: > MJPEG video compression format > Built-in Microphone > Support two-way audio function > Freely control upload image to FTP > Freely control Pan/Tilt angle by software > Freely control Pan/Tilt speed by software > Support up to 9 users online simultaneously > Motion detection alert with snapshots via email > Allow remote view & record from anywhere anytime > Multi-level user management with password protection > Wi-Fi compliant with wireless standards IEEE 802.11b/g > Support both WEP & WPA WPA2 encryption for wireless > Support Mobile phone login from User Interface via browser directly > Support IE, Safari, Firefox, Google chrome browser or any other standard browsers Specification: Model: PUB-V802-WS Image Sensor Image Sensor 1/4" Color CMOS Sensor Display Resolution 640 x 480 Pixels(300k Pixels) Lens f: 6 mm, F:2.0 (IR Lens) (3.6mm lens optional) Mini. Illumination 0.5Lux Lens Lens Type Glass Lens Viewing Angle 60 Degree (3.6mm lens is 90Degree) Audio Input Built-in Microphone Output 1 channel audio output Audio Compression ADPCM Video Image Compression MJPEG Image Frame Rate 15fps(VGA),30fps(QVGA) Resolution 640 x 480(VGA), 320 x 240(QVGA) Flip Mirror Images Vertical / Horizontal Light Frequency 50Hz, 60Hz or Outdoor Video Parameters Brightness, Contrast Communication Ethernet Interface Build in 10/100Mbps,Auto MDI/MDIX , RJ-45 Supported Protocol HTTP,FTP,TCP/IP, UDP, SMTP, DHCP, PPPoE, DDNS, UPnP, GPRS Wireless Standard IEEE 802.11b/g |
|
| » Posted by: SOUTH EAST (ASIA) LIMITED [China] |
|
|
|
|
|
[Sell]
Top Quality Research Chemicals and pain Pain Killers For Sale |
|
|
We are supplier of Pain Killers,and research Chemicals such as, Ketamine, 2ce, 2ci, 2cb, tma2,dmt,2c.b, Coke, Ephedrine hcl, Mephedrone, Mdai, 4mmc, Mdpv, Lsd, Jwh in all Series, Oxycotine, Cocaine, Methoxetamine, Xanax, Rohypnol, Kush, Methadone, Ephedrine, Research chemicals, Pain illers emical, Methoxetamine, mxe, ephHcl Powder, Methaphetamine, Coke, herion, Roxicodone, Weed, Cananis, Nubain, Opana, Methadone, Testosterone, Suboxone, Fentanyl, Percocet, Speed(ICE), Kush, Marijuana, Og kush, Black diamond, Lavender, Purple haze, Shunk, Purple maui Strewberry, White widow, Blueberry cheese, Hash oil, New york diesel, Orange kush, Marijuana, All sort of HGH (HUMAN GROWTH HORMONE) etc.
We are capable of shipping to anywhere in the world without stress. We have never had a problem with the customs Because they can not dictate our parcels.
So sale home delivery is 100% Guaranteed. Shipment to US, UK, AU and EU takes just a maximum of 48 hours. We do use FEDEx, TNT, UPS, DHL and EMS.
If you are interested to start good partnership business with us, then you can get back to us via email address: angelicastrombla [at] gmail.com
Looking Forward only to long. |
|
» Posted by: PAIN KILLERS AND RESEARCH CHEM PHAMARCY [Malaysia]  |
|
|
|
|
|
[Sell]
Intelligent Middle Speed Dome Camera(PUB-AD900B1) |
|
|
| Intelligent Middle Speed Dome Camera, Speed Dome Camera, Dome Camera, CCTV Camera. Model No.: PUB-AD900B1 Intelligent Middle Speed Dome Camera (NO Menu Programming). Zoom Camera parameter: (27X480TVLzoom Camera). 1/4"SONY Super HAD CCD; 12VDC; Pelco-D; PTZ Control type Horizontal Resolution: 480TVL 27x optical zoom; (max 27) Day&Night; Min illumination: 1Lux (30IRE) 0.5Lux(Color); 0.001Lux(B/W) 128 FLD; Auto Iris; 6 BLD area; RS-485 Adjusted Video transmit distance (3 step) Speed Dome parameter: Low Power Circuit Design, 6/7 inches Buble; 0.9Motor Driver,1/32 Stepover Power Drive and Circuit Drive Subdivision Smooth Operation, Accurate Positioning Built-in Memory to Store the Setting Data, Which can not be Lost After Power Off Continuous 360Pan Turning, 90Tilt Turning (180 Auto Flip) Variable Pan Speed Between 0.1-240/sec Variable Tilt Speed Between 0.5-120/sec Auto Flip ,360Continuous Pan; 128 Presets, 5Tour Routes Built-in Heater and Blower; Built-in Power Surge/Lightning Protection Weather Proof Design, Protection Grade IP65; RS-485 Interface Turning Speed Automatically Adjusts Along With Lens Zooming to Locate Object Exactly by Large Magnification, Preset Point Function, Position and Duration Adjustable Pan Movement: 360Continuous Pan Rotation Vertical Movement: 180Turn Over Automatically, No Shadow Region Region Pan: 0.1-240/STilt: 0.5-120/S; Presets: 128 Cruising Routes: 5, 16 Presets Each Route Pause Interval Between Two Points: Duration and Position Can be Customized, Scan Automatically: Speed Adjustable Raud Rate: (RS-485) 2400/4800/9600/19200bps Address Range: 0-255 Upper Shield: High Strength Double Layer Aluminum Alloy, High Temperature Resistance Corrosion Resistant Lower Shield: High Class Acrylic Bubble, Installation Method: Wall Mounting/ Lifting/ Inseting/Ceiling Environment: Indoor/ Outdoor Input Voltage: AC245V Power Consumption: 10W Indoor, 5W Outdoor Operating Temperature: 0-60C Indoor, -40-60C Outdoor |
|
| » Posted by: SOUTH EAST (ASIA) LIMITED [China] |
|
|
|
|
|
[Sell]
Universal Rubber Machinery |
|
|
| Universal Rubber Machinery, Internal (Banbury) Mixer is the best machine for mixing of big quantity plastic and rubber material. This Banbury Mixer is mainly used for plasticizing and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics, foaming plastics, and used in mixing of various the degree materials. Technical Advantages: 1. The diversity of rotor type can meet different mixing requirements. User can choose any kind of rotors (the mixer with different rotor has different total volume and working volume. 2. Drive system adopts DC motor or AC inverter motor to realize stepless speed adjustment or adopts Ac Motor with gear box etc. The drive system has the advantages of steady drive, lower noise and long service life etc. 3. The standard rotor adopts the right drive system. According to users needs we also can supply the left drive system. 4. Drive system adopts DC motor or AC inverter motor to realize stepless speed adjustment or adopts Ac motor with gear box etc. The drive system has the advantages of steady drive, lower noise and long service life etc. 5. On-site operation cabinets and electrical control cabinets adopt PLC communication, results in reduction of equipment troubles and installation cost. Construction Features: 1. With completely condition, materials are mixed or plasticizing under certain pressure, controllable temperature, which makes high production efficiency and obtains excellent quality 2. Spiral angle and over lapping length of blades of the rotors are of reasonable design and make the materials to be dispersed uniformly 3. Surface where is contacted with the materials are all plated with hard chromium and polished, which is corrosion-resistant and wear-resistant 4. Jacket construction is adopted in parts that surfaces contact with materials to achieve excellent water-cooling or steam heating effect and fit in with the needs of plastics and rubber processing technology. |
|
| » Posted by: Qingdao Shun Cheong Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
RTV Silicone rubber HY-638 for concrete casting |
|
|
Usage:
RTV Silicone rubber HY638 is most suitable for concrete castings, cement statue, concrete pavers, GRC cement products, etc. with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc.
It is suitable for large products with detailed pattern, which is difficult to demould.
This silicone rubber is one of the products with the highest use level in the production of concrete castings and the shrinkage is up to 0.2%.
Description: 　　
RTV-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance.
Add curing agent of 2%~5% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.
Standard datasheet:
Model appearance viscosity (cps): 20000~26000
Hardness (shore A): 32~36
Tensile Strength (Kgf/cm2):45~51
Tear strength (Kgf/㎝): 20~25
Elongation (%) ≧500
Mixing ratio (%):2~3
Operating time (h): 0.5
Curing time (h):2~4
Operation instruction for RTV-2 silicone rubber HY638#:　　
The product is white or red flowing liquid with general hardness of 22~50 shore A after curing.
If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness.
On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness.
The amount of the curing agent depends on the actual requirements of the customer.
If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
Notes:
We do not recommend adding silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%~10% silicone oil can be added to soften the mold for easy demould.
The proportions and reactions of the curing agent and the silicon are listed as follows: 　　
Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours. 　　
Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours. 　　
Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.
Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded.
Any further information pls feel free to contact with Ms Nina
Shenzhen Hong Ye Jie Technology Co., Ltd.
|
|
| » Posted by: Shenzhen Hong Ye Jie Tech Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Addition cure silicone rubber for making molds |
|
|
1. Brief description of Addition cure silicone rubber :
Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making, medical catheter and so on. It is nontoxic and with very low shrinkage.
2. Addition cure silicone rubber applications:
Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making, life casting, medical catheter and so on.
3. Addition cure silicone rubber features:
a) Two-component silicone rubber with platinum catalyst
b) With high transparency, tensile strength, and tear strength.
c) Nontoxic & reach to Food grade
d) With good heat stability and weatherability ( temperature resistant range of -60—250 C)
e) With heat-ageing resistance
Any further information pls feel free to contact with Ms Nina
TEL: 0086-755-89948019
Fax: 0086-755-89948030
E-mail: hyjr(at)szrl(dot)net
Website: www(dot)szrl(dot)net
Place of Origin: Guangdong China
Brand Name: Hong Ye Silicone Rubber
Model Number: HY-E620, HY-E630, HY-E642 addition cure silicone rubber
Minimum Order Quantity: 100 Kilogram
Price: FOB shenzhen 9.35~14 USD /KG
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T
Supply Ability: 8 Ton per Day
Certifications: RoHS/MSDS/SGS/ISO9001:2008
|
|
| » Posted by: Shenzhen Hong Ye Jie Tech Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Manual mold silicon rubber HY540 |
|
|
Manual mold silicon rubber HY540 Description:
Manual mold silicon rubber HY540 is flowing liquid with consistant quality in whatever color. It consists of two components, A is silicone rubber, and B is curing agent or vulcanizing agent. Manual mold silicon rubber HY540 is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, cultural relics duplication, shoe sole mold fabrication, pad printing positioning, electronic equipments antivibration, etc.
Manual mold silicon rubber HY540 Standard Datasheet:
Appearance White
Viscosity(cps) ≤18000
Hardness(Ao) 38±2
TensileStrength (Mpa) ≥2.0
Tear Strength (KN/m) ≥7
Elongation(%) ≥200
Mixing Ratio (%) 2~3
Pot life (H) 0.5
Demould time(H) 2~4
Manual Mold Silicon Rubber FAQ:
How to prevent silicon manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded , then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pour the silicon into the mold when the mixture is mixed evenly, then the finish silicon mold will not cure and dry entirely.
Any further information pls feel free to contact with Ms Nina
TEL: 0086-755-89948019
Fax: 0086-755-89948030
E-mail: hyjr(at)szrl(dot)net
Website: www(dot)szrl(dot)net
|
|
| » Posted by: Shenzhen Hong Ye Jie Tech Co., Ltd. [China] |
|
|
|
|
|
[Sell]
molding silicone rubber HY620 |
|
|
Molding Silicone Rubber HY620 Description:
Molding Silicone Rubber HY620 is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This molding Silicone Rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2‰.
Molding Silicone Rubber Standard Datasheet:
Model 620
Appearance White
Viscosity (cps) ≤16000
Hardness (A°) 20±2
Tensile strength (Mpa) ≥2.8
Tear strength (KN/m) ≥20
Elongation (%) ≥400
Mixing ratio (%) 2~3
Operating time(H) 0.5~1
Curing time(H) 2~5
Molding silicone rubber Operation Instruction:
Molding silicone rubber is white or red flowing liquid with general hardness of 18-22A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silica gel with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of liquid silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft liquid silicone mold or fine detailed and complex patterns products are required, 5%-10% silica gel oil can be added to soften the mold for easy demould.)
Molding Silicone Rubber FAQ:
Why is the appearance of the finished mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the products, spray the realese agent evenly on the product. In this case, the problem can be avoided.
Any further information pls feel free to contact with Ms Nina
TEL: 0086-755-89948019
Fax: 0086-755-89948030
E-mail: hyjr(at)szrl(dot)net
Website: www(dot)szrl(dot)net
|
|
| » Posted by: Shenzhen Hong Ye Jie Tech Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
|
