|
|
|
|
|
[Sell]
Testosterone propionate CAS NO.: 57-85-2 |
 |
|
Testosterone propionate
Chemical Name: 4-Androsten-17beta-ol-3-one propionate
CAS NO.: 57-85-2
Molecular Formula: C22H32O3
Molecular weight: 344.49
Standard: USP28/BP2003
My web:http://cnrdn.com/fuUE
Friendly link:http://cnrdn.com/4ZSE |
|
» Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China]  |
|
|
|
|
|
[Sell]
Testosterone undecanoate CAS NO.: 5949-44-0 |
|
|
Testosterone undecanoate
Chemical Name: 4-Androsten-17beta-ol-3-one undecanoate
CAS NO.: 5949-44-0
Molecular Formula: C30H48O3
Molecular weight: 456.70
Assay: 97.0%~103.0%
Standard: CP2000
Chemical Properties: White Solid
usage: A metabolite of Testosterone (T155000). It is a promising androgen for male hormonal contraception.
My web:http://cnrdn.com/fuUE
Friendly link:http://cnrdn.com/4ZSE |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
17-alpha-Methyl Testosterone/Mesterone/Andrometh |
|
|
17-alpha-Methyl Testosterone
Alias: 17beta-hydroxy-17alpha-methylandrost-4-en-3-one; Mesterone; Andrometh; 17-Methyl Testosterone; Nu-man; Testoviron
CAS No.: 58-18-4
Appearance : white crystalline powder
Use: It is used as a feed additive to produce predominately male populations of tilapia
My web:http://cnrdn.com/fuUE
Friendly link:http://cnrdn.com/4ZSE |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
4-Hydroxy Testosterone CAS：566-48-3 |
|
|
4-Hydroxy Testosterone
Chemical Name: 4-Androsten-4,17beta-ol-3-one
CAS：566-48-3
Molecular Formula: C19H28O3
Molecular weight: 304.42
Standard: Enterprise Standard
If u need latex,pls check http://szstuliao.com |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Boldenone Acetate CAS NO.: 10161-34-9 |
|
|
Boldenone Acetate
CAS NO.: 10161-34-9
Assay: 98.8%;
Appearance: white to almost white crystalline powder;
Standard: Enterprise Standard
If u need paint and coating,pls check http://www.szsdope.com |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Boldenone Undecylenate CAS NO.: 13103-34-9 |
|
|
Boldenone Undecylenate
CAS NO.: 13103-34-9
Molecular Formula: C30H44O3
Molecular weight: 452.67
Assay: 97.0~103.0%
Standard: Enterprise Standard
If u need daily chemical,pls check http://www.chrihua.com |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Boldenone undecanoate/Boldenone Undecylenate/equipoise 98% purity |
|
|
Boldenone undecanoate
Alias: equipoise;Boldenone Undecylenate
CAS No: 13103-34-9
MF: C30H44O3
MW: 452.67
Purity: 98%
Package: 1kg/Plastic bottles
Appearance: light yellow viscous liquid.
USES: anabolic steroids.
if u need imidazole,pls check http://www.mizuoyl.com |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
BOLDENONE PROPIONATE CAS No.: 13103-34-9 |
|
|
BOLDENONE PROPIONATE
Synonyms: 1-DEHYDROTESTOSTERONE PROPIONATE
Chemical Name: 1,4-androstadien-17bet-ol-3-one Propionate
CAS No.: 13103-34-9
MF: C22H30O3
MW: 342.47
Standard: Enterprise StandardSynonyms: 1-DEHYDROTESTOSTERONE PROPIONATE
Chemical Name: 1,4-androstadien-17bet-ol-3-one Propionate
CAS No.: 13103-34-9
MF: C22H30O3
MW: 342.47
Standard: Enterprise Standard
If u need vitamins,pls check http://www.wsscs.com |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
BOLDENONE CYPIONATE CAS: 106505-90-2 |
|
|
BOLDENONE CYPIONATE
Synonyms: BOLDENONE CYPIONATE; 17beta-Hydroxyandrosta-1,4-dien-3-one Cyclopentanepropionate
CAS: 106505-90-2
MF: C26H38O3
MW: 398.58Synonyms: BOLDENONE CYPIONATE; 17beta-Hydroxyandrosta-1,4-dien-3-one Cyclopentanepropionate
CAS: 106505-90-2
MF: C26H38O3
MW: 398.58
My web:http://cnrdn.com/fuUE
Friendly link:http://cnrdn.com/sYSE |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Nandrolone Decanoate CAS NO.: 360-70-3 |
|
|
Nandrolone Decanoate
Chemical Name: 4-estren-17beta-ol-3-one decanoate
CAS NO.: 360-70-3
Molecular Formula: C28H44O3
Molecular weight: 428.65
Appearance: white or oyster white to pale yellow crystalline powder
Standard: USP28; BP2003
My web:http://cnrdn.com/fuUE
Friendly link:http://cnrdn.com/sYSE |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Nandrolone phenylpropionate CAS NO.: 62-90-8 |
|
|
Nandrolone phenylpropionate
Chemical Name: 4-estren-17beta-ol-3-one phenylpropionate
CAS NO.: 62-90-8
Molecular Formula: C27H34O3
Molecular weight: 406.56
Appearance: white or almost white crystalline powder ;soluble in ethanol, slightly soluble in vegetable oil ; practically insoluble in water
Standard: USP28;BP2003
My web:http://cnrdn.com/fuUE
Friendly link:http://cnrdn.com/sYSE |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Nandrolone laurate CAS NO.: 26490-31-3 |
|
|
Nandrolone laurate
Chemical Name: 4-estren-17beta-ol-3-one laurate
CAS NO.: 26490-31-3
Molecular Formula: C30H48O3
Molecular weight: 456.71
Appearance: white or almost white crystalline powder
Standard: Enterprise Standard
My web:http://cnrdn.com/fuUE
Friendly link:http://cnrdn.com/sYSE |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Nandrolone cypionate CAS NO.: 601-63-8 |
|
|
Nandrolone cypionate
CAS NO.: 601-63-8
Molecular Formula: C26H38O3
Molecular weight: 398.58
Standard: Enterprise Standard
My web:http://cnrdn.com/fuUE
Friendly link:http://cnrdn.com/sYSE |
|
| » Posted by: Wuhan Yuancheng Pharmaceutical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Copper Sulfate |
|
|
Model: 97% Product Name: copper sulfate
Content ≥: 97% size: 20-120 (mesh)
Use level: feed grade content: Cu = 25
The factory specializing in the production of crystal copper sulfate, copper sulfate powder.
Chemical English Name: copper sulfate
Commonly known as the crystalline hydrate: blue, blue vitriol
Molecular formula: CuSO4 (pure), CuSO4 5H2O (hydrate)
Molecular weight: 159.68
With the appearance of the characters: blue three triclinic crystal.
PH:3.5
The melting point (:200 ) (anhydrous)
Boiling point (c): high temperature decomposition
Relative density (=1):2.28
Solubility: soluble in water, 25 for 23.05g solubility in water, soluble in dilute ethanol, not soluble in ethanol, ethyl ether, liquid ammonia.
Main uses: used for producing other copper salt, also used as textile mordant, insecticide, fungicide, and used for the copper.
Copper sulfate (Copper sulphate) - also called blue or blue hydrate. Copper sulfate is often as crystal copper sulfate five hydrated referred to as.
Copper sulfate CuSO4.H2O with molecular weight of 160 (copper sulfate crystal: CuSO4 5H2O with molecular weight of 249.68)
Dark blue large granular crystals or blue granular crystalline powder. Poisonous, odorless, with a metallic taste.
The density of 2.2844g / cm^3. The dry air will slow weathering. Soluble in water, weak acidity of the aqueous solution (288K solution, CuSO4 pH 0.1mol/L = 4.2), insoluble in ethanol. The crystal is heated will lose water of crystallization, 45 lose two molecules of water of crystallization, 110 lose four molecules of water of crystallization, 258 will lose all water crystallization become white powdered anhydrous copper sulfate, 650 is decomposed into three copper oxide and sulfur dioxide. Anhydrous copper sulfate have a strong water absorption, put it into 95% ethanol or aqueous organic matter, namely, moisture absorption and recovery for the blue crystal. The three-dimensional structure of the copper ions in copper sulfate can damage proteins, denature. Determination of protein concentration often add alkali in protein, adding copper sulfate solution, the solution will become purple. At this time, the reaction is called biuret reaction. Anhydrous copper sulfate is white powder; density of 3.603 g / cm; 25 solubility in water is 23.05 grams per 100 grams of water, insoluble in ethanol or ether; strong absorbent, water after the blue. Copper sulfate is heated to 650 into CuO:
|
|
| » Posted by: FongRe Rare Material Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
CuSO4 |
|
|
Model: 97% Product Name: copper sulfate
Content ≥: 97% size: 20-120 (mesh)
Use level: feed grade content: Cu = 25
The factory specializing in the production of crystal copper sulfate, copper sulfate powder.
Chemical English Name: copper sulfate
Commonly known as the crystalline hydrate: blue, blue vitriol
Molecular formula: CuSO4 (pure), CuSO4 5H2O (hydrate)
Molecular weight: 159.68
With the appearance of the characters: blue three triclinic crystal.
PH:3.5
The melting point (:200 ) (anhydrous)
Boiling point (c): high temperature decomposition
Relative density (=1):2.28
Solubility: soluble in water, 25 for 23.05g solubility in water, soluble in dilute ethanol, not soluble in ethanol, ethyl ether, liquid ammonia.
Main uses: used for producing other copper salt, also used as textile mordant, insecticide, fungicide, and used for the copper.
Copper sulfate (Copper sulphate) - also called blue or blue hydrate. Copper sulfate is often as crystal copper sulfate five hydrated referred to as.
Copper sulfate CuSO4.H2O with molecular weight of 160 (copper sulfate crystal: CuSO4 5H2O with molecular weight of 249.68)
Dark blue large granular crystals or blue granular crystalline powder. Poisonous, odorless, with a metallic taste.
The density of 2.2844g / cm^3. The dry air will slow weathering. Soluble in water, weak acidity of the aqueous solution (288K solution, CuSO4 pH 0.1mol/L = 4.2), insoluble in ethanol. The crystal is heated will lose water of crystallization, 45 lose two molecules of water of crystallization, 110 lose four molecules of water of crystallization, 258 will lose all water crystallization become white powdered anhydrous copper sulfate, 650 is decomposed into three copper oxide and sulfur dioxide. Anhydrous copper sulfate have a strong water absorption, put it into 95% ethanol or aqueous organic matter, namely, moisture absorption and recovery for the blue crystal. The three-dimensional structure of the copper ions in copper sulfate can damage proteins, denature. Determination of protein concentration often add alkali in protein, adding copper sulfate solution, the solution will become purple. At this time, the reaction is called biuret reaction. Anhydrous copper sulfate is white powder; density of 3.603 g / cm; 25 solubility in water is 23.05 grams per 100 grams of water, insoluble in ethanol or ether; strong absorbent, water after the blue. Copper sulfate is heated to 650 into CuO:
|
|
| » Posted by: FongRe Rare Material Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6) resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for Liquid Silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for Liquid Silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
HY-620 HY-640 HY-628 HY-638 HY-625
L/C T/T Western union
For more information , pls feel free to contact Ms Christy
TEL: 086-755-89948006
FAX: 086-755-89948030
Mobile: 86-189 3886 7547
Skype: christyxu911
Email: hyxj(at)szrl(dot)net |
|
| » Posted by: Hongye silicone rubber company [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making
Silicon rubber for mold making applications
1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicon rubber for mold making features
Silicon rubber for mold making is white flowing liquid with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6) Resistance to acid-alkali and expansion
Silicon rubber for mold making operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes: otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
Shelf life for silicon rubber for mold making
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
HY-620 HY-640 HY-628 HY-638 HY-625
For more information , pls feel free to contact Ms Christy
TEL: 086-755-89948006
FAX: 086-755-89948030
Mobile: 86-189 3886 7547
Skype: christyxu911
Email: hyxj(at)szrl(dot)net |
|
| » Posted by: Hongye silicone rubber company [China] |
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
|
|
Silicone rubber for concrete molds
Silicone rubber for concrete molds applications
1. Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products .
Silicone rubber for concrete molds features
Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6) resistance to acid-alkali and expansion
Silicon rubber for concrete molds operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes; otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .
Shelf life for silicon rubber concrete molds
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for concrete molds
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
HY-620 HY-640 HY-628 HY-638 HY-625
For more information , pls feel free to contact Ms Christy
TEL: 086-755-89948006
FAX: 086-755-89948030
Mobile: 86-189 3886 7547
Skype: christyxu911
Email: hyxj(at)szrl(dot)net |
|
| » Posted by: Hongye silicone rubber company [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Platinum cured silicone rubber for tire mold
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It?s mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1) Non- shrinkage
2) high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4) high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes; otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
200 kg/drum for part A+ 200kg/drum for part B in one set
HY-E625
HY-E630
HY-E642
HY-E 610
HY-E 615
HY-E 635
HY-E 650
For more information , pls feel free to contact Ms Christy
TEL: 086-755-89948006
FAX: 086-755-89948030
Mobile: 86-189 3886 7547
Skype: christyxu911
Email: hyxj(at)szrl(dot)net
10.88~14.88$/kg |
|
| » Posted by: Hongye silicone rubber company [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes; otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kgs/drum vacuumed packing
L/C T/T
HY-901 HY-902 HY-912 HY-918 HY-916 HY-933
For more information , pls feel free to contact Ms Christy
TEL: 086-755-89948006
FAX: 086-755-89948030
Mobile: 86-189 3886 7547
Skype: christyxu911
Email: hyxj(at)szrl(dot)net |
|
| » Posted by: Hongye silicone rubber company [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
