|
|
|
|
|
|
|
[Sell]
Manufacture of RTV pad printing silicone rubber |
 |
|
Manufacture of RTV pad printing silicone rubber usages:
Manufacture of RTV Pad Printing Silicone Rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass, electroplating toys and trade makers and so on.
Manufacture of RTV pad printing silicone rubber description
Manufacture of RTV Pad Printing Silicone Rubber as a carrier which transfers patterns on the steel plate to the toys products surface.
Manufacture of RTV pad printing silicone rubber features:
1) High print times
2) Abrasion resistance.
3) Good printing effects
4) Permanent and durable
Manufacture of RTV pad printing silicone rubber operation instructions:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes. Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for manufacture of RTV pad printing silicone rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for manufacture of RTV pad printing silicone rubber
20kgs/drum vacuumed packing
For more information, please feel free to contact Ms. Susie
Office No.: 0086-755-89212380
Mob: +86-18938867549
Skype: susie0017
Email: hysx(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
» Posted by: SHENZHEN HONG YE JIE SILICONER RUBBER TECHNLOGY CO., LTD [China]  |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Platinum cured silicone rubber description
Platinum cure silicone rubber is a kind of FDA grade silicone, generally named two components silicone rubber with translucent appearance, Part A and part B mixing in 1:1. It?s suitable for molds making application.
Platinum cure silicone rubber applications
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Platinum cure silicone rubber advantages
1) Non- shrinkage (less than 0.1%)
2) High tensile and tear strength with high copy times
3) Exceptional fluidity and good operability (mixing ratio at 1:1)
4) High temperature resistant in 250 Centigrade
Platinum cure silicone rubber operation instructions
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two parts evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes. Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly.
Shelf life for platinum cured silicone rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for platinum cured silicone rubber
20kg/drum for part A+ 20kg/drum for part B in one set
200 kg/drum for part A+ 200kg/drum for part B in one set
For more information, please feel free to contact Ms. Susie
Office No.: 0086-755-89212380
Mob: +86-18938867549
Skype: susie0017
Email: hysx(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE SILICONER RUBBER TECHNLOGY CO., LTD [China] |
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
|
|
Silicone rubber for concrete molds
Silicone rubber for concrete molds applications
1. Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products .
Silicone rubber for concrete molds features
Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Silicon rubber for concrete molds operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .
Shelf life for silicon rubber concrete molds
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for concrete molds
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For further information, pls contact with Miss Kimberly
TEL: 0086-755-89948006
Mobile: 0086-13554758940
Mail : hyyf(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime .
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making
Silicon rubber for mold making applications
1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicon rubber for mold making features
Silicon rubber for mold making is white flowing liquid with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Silicon rubber for mold making operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
Shelf life for silicon rubber for mold making
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For further information, pls contact with Miss Kimberly
TEL: 0086-755-89948006
Mobile: 0086-13554758940
Mail : hyyf(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime .
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Platinum cured silicone rubber for tire mold
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It is mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1)Non- shrinkage
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For further information, pls contact with Miss Kimberly
TEL: 0086-755-89948006
Mobile: 0086-13554758940
Mail : hyyf(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime .
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Platinum cured silicone rubber
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It is suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For further information, pls contact with Miss Kimberly
TEL: 0086-755-89948006
Mobile: 0086-13554758940
Mail : hyyf(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime .
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD [China] |
|
|
|
|
|
[Sell]
Octyl 4-methoxycinnamate |
|
|
Octyl 4-methoxycinnamate
CAS：5466-77-3
Specification：98%
Packaging：25kg Barrel
Molecular formula: C18H26O3 Molecular Weight: 290.4 .Quality Standard: Enterprise standard Packing: 25kg Properties: colorless to light yellow viscous liquid. Does not dissolve in water, soluble in organic solvents such as ethanol, should be stored in a cool place closed, boiling point 198-200 ? C, density 1.009, refractive index 1.543-1.547, flash point 193 ? C, content: ≥ 98%; naturally: not reported. Uses: 1, This product is a good UV-absorbent UVB region, can effectively prevent 280-330mm UV, and the absorption rate of skin stimulation, safety, and is almost an ideal sunscreen. for the preparation of sunscreen (cream, milk, liquid), and other skin care cosmetics, can effectively absorb the sun in the ultraviolet, to prevent the skin drying red, sunburn, drying ink, but also light-sensitive dermatitis treatments. 2, in the industry as a plastic, ink anti-aging agents and UV absorbers. 3, oil-soluble UV-B absorbing liquid can be mixed with various types of sunscreen.
|
|
| » Posted by: Cinnamic family [China] |
|
|
|
|
|
[Sell]
cinnamyl formate |
|
|
cinnamyl formate
Product Name: cinnamyl formate
CAS NO. 104-65-4
EINECS No. 203-223-3
Molecular Formula C10H10O2
MW 162.18
Boiling point: 250 ℃, flash point: 100 ℃ or more.
Relative density (25 ℃) :1.077-1 .082,
Refractive index (20 ℃) :1.550-1 .556.Signs of dangerous goods
Packaging specifications: 25kg cardboard drum
Specifications Model: 98% enterprise standard
Physical and Chemical Properties: colorless or light yellow transparent liquid with cinnamon like balsam gas, has a bitter taste.
Miscible in ethanol, ethyl ether, chloroform and most of the non-volatile oil, a few do not dissolve in water.
Usage: spices. Is mainly used for the preparation of strawberry, raspberry, peach, banana and spices such as flavor.
|
|
| » Posted by: Cinnamic family [China] |
|
|
|
|
|
[Sell]
Ethyl 4'-hydroxy-3'-methoxycinnamate |
|
|
Ethyl 4'-hydroxy-3'-methoxycinnamate
Product name: Ethyl 4'-hydroxy-3'-methoxycinnamate
Synonym: ethyl 4-hydroxy-3-methoxycinnamate
CAS：4046-02-0
Specification：98%
packaging: 25 kg drum
Detection methods: chromatography
CAS No. :4046 -02-0 formula: C12H15O4 Molecular Weight: 223.24 Melting point :56-58 ? Loss on drying: ≤ 0.10% Content (HPLC): ≥ 98.0% of dangerous goods symbol: Xi Risk Codes: R36/37/38 Safety Instructions : S26; S37/39 Packing: 25 kg / cardboard drum. Properties: white crystalline powder Save: dark, closed storage. Preparation: ferulic acid / ferulic acid ethyl ester is angelica, Chuanxiong and other active ingredients extracted from traditional Chinese medicine.
|
|
| » Posted by: Cinnamic family [China] |
|
|
|
|
|
[Sell]
Methyl 4-hydroxy-3-methoxycinnamate |
|
|
Methyl 4-hydroxy-3-methoxycinnamate
CAS：2309-07-1
Specification：98%
packaging: 25 kg drum
Detection methods: chromatography
CAS RN :2309-07-1
Molecular Formula C11H12O4 Molecular Weight 208.21 Product content: 98% Quality Standard: Enterprise standard Packing: 25KG / drum product patents: 821180208 Description: ferulic acid, ferulic acid methyl ester (ethyl) ester, an active ingredient in 99%, white crystalline powder. Antioxidant, whitening, anti-inflammatory and other effects. Cosmetics for skin, skin with a silk texture.
|
|
| » Posted by: Cinnamic family [China] |
|
|
|
|
|
[Sell]
Cinnamyl bromide |
|
|
Cinnamyl bromide
CINNAMYL BROMIDE;BETA-BROMOMETHYLSTYRENE;3-BROMO-1-PHENYL-1-PROPENE;
3-BROMO-1-PHENYLPROPENE;3-BROMO-1-PHENYL PROPENE-1;3-BROM-1-PHENYLPROPEN;
(3-BROMOPROPENYL)BENZENE;3-PHENYLALLYLBROMID
Molecular Formula, , C9H9Br
Molecular Weight, , 197.07
CAS Registry Number, , 4392-24-9
EINECS, , 224-511-5
Density, , 1.332
Melting point, , 26-32 ?C
Boiling point, , 103 ?C (22 mmHg)
Refractive index, , 1.621
Flash point, , 87 ℃
|
|
| » Posted by: China Cinnamic [China] |
|
|
|
|
|
[Sell]
3-Phenylpropionic acid |
|
|
3-Phenylpropionic acid
Name: 3-Phenylpropionic acid
Alias: Benzylacetic acid
Hydrocinnamic acid;
beta-Phenylpropionic acid
Benzenepropanoic acid
3-Phenylpropanoic acid
Benzenepropionic acid
Dihydrocinnamic acid
CAS: 501-52-0
Properties: Prism-like white crystal; MP: 48.5?C, BP:280?C, Density: 1.07; Free soluble in hot-water,alcohol, benzene, chloroform, ether, glacial acetic acid, petr ether and carbon disulfide. Slightly soluble in cold water, With the steam can be volatile.
Usage: It is the spice of a perfume fixative
|
|
| » Posted by: China Cinnamic [China] |
|
|
|
|
|
[Sell]
3-Hydroxycinnamic acid |
|
|
3-Hydroxycinnamic acid
Chemical Name:3-Coumaric acid
CAS#: 14755-02-3
Assay: 98%min
Appearance: white crystal
Mp: 189-192 degree C
Molecular formula: C9H8O3
Molecular weight: 164.16
Usage: organic chemical intermediates
|
|
| » Posted by: China Cinnamic [China] |
|
|
|
|
|
[Sell]
Cinnamic acid |
|
|
Cinnamic acid
CAS: 621-82-9
Molecular formula: C9H8O2
Molecular weight: 148.16
Appearance: White to light yellow crystal powder
Fragrance: Unique scent
Purity: ≥99%
Melting point: 132.5-134.5℃
Heavy metals: ≤10ppm
Residue on ignition: ≤0.1%
Usage: The main use of cinnamic acid is in the manufacture of the methyl, ethyl, and benzyl esters for the perfume industry.
Ethyl ester used in glass prisms, lenses. Some esters, such as chaulmoogryl and other derivatives, are used in medicine.
Packing: 25kg/plastic bag
|
|
| » Posted by: China Cinnamic [China] |
|
|
|
|
|
[Sell]
Acetic Acid Deoxy Corticosterone |
|
|
Acetic Acid Deoxy Corticosterone
Molecular Formula:C23H32O4
Molecular Weight:372.50
Product Implementation Quality Standard: USP, EP, BP |
|
| » Posted by: Hubei chemical company [China] |
|
|
|
|
|
[Sell]
Cortisone Acetate |
|
|
Cortisone Acetate
Molecular Formula:C23H32O6
Molecular Weight:404.5
CAS：50-03-3
Product Implementation Quality Standard: USP, EP, BP |
|
| » Posted by: Hubei chemical company [China] |
|
|
|
|
|
[Sell]
Hydrocortisone Acetate |
|
|
Hydrocortisone Acetate
Molecular Formula:C23H32O6
Molecular Weight:404.5
CAS：50-03-3
Product Implementation Quality Standard: USP, EP |
|
| » Posted by: Hubei chemical company [China] |
|
|
|
|
|
[Sell]
Hydrocortisone |
|
|
Hydrocortisone
Molecular Formula:C21H30O5
Molecular Weight:362.5
CAS：50-23-7
Product Implementation Quality Standard: USP, EP |
|
| » Posted by: Hubei chemical company [China] |
|
|
|
|
|
[Sell]
Ethynodiol diacetate |
|
|
Ethynodiol diacetate
Molecular Formula: C6H6O4
Formula Weight: 142.11
CAS:297-76-7
Appearance white fine powder
Packing:5kg/drum
25kg/drum |
|
| » Posted by: Wuhan chemical company [China] |
|
|
|
|
|
[Sell]
Ethinylestradiol |
|
|
Ethinylestradiol
CAS NO: 57-63-6
Molecular Weight: 296.41
Molecular Formula: C20H24O2
Standard: USP28 |
|
| » Posted by: Wuhan chemical company [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
|
