|
|
|
|
|
[Sell]
Testosterone Base |
 |
|
Testosterone Base
Chemical name: 4-Androsten-17β-ol-3-one
CAS No.: 58-22-0
Content: 98%
Molecular formula: C19H28O2
Appearance: white or off-white crystalline powder
Specification: enterprise standard
|
|
» Posted by: Steroid Net [China]  |
|
|
|
|
|
[Sell]
Y005-ST5 Switerland Approve |
|
|
| Switerland Approve 3 pins plug with , 3x0.75-1.0 power cord and computer connector www.china-yuniao.com www.plug-powercord.com |
|
| » Posted by: NingBo YunBiao Electronics Science&Technology Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
|
|
1. Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products .
Silicone rubber for concrete molds features
Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50 shore A after curing with features ------
(1) High tensile & tear strength
(2) High duplication times
(3) Low linear shrinkage
(4) Resistance to high-temperature
(5) Low shrinkage and non-deformation
(6) Resistance to acid-alkali and expansion
Silicon rubber for concrete molds operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .
Shelf life for silicon rubber concrete molds
10~12months, when stored in a dry & cool place under the room temperature 25.
For more information , please contact with Ms Judy
Office No.:0086-755-89948013
Mob:86-13974195268
Skype:Lotus201399
MSN:Lotusjudy@hotmail.com
Email :hyxy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3)Exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
For more information , please contact with Ms Judy
Office No.:0086-755-89948013
Mob:86-13974195268
Skype:Lotus201399
MSN:Lotusjudy@hotmail.com
Email :hyxy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) Abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
For more information , please contact with Ms Judy
Office No.:0086-755-89948013
Mob:86-13974195268
Skype:Lotus201399
MSN:Lotusjudy@hotmail.com
Email :hyxy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Manual mold design silicone rubber |
|
|
Manual mold design silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Manual mold silicone rubber features description
The manual mold design silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.
Manual mold design silicone rubber operations
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.
(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.)
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Silicon rubber for mold making |
|
|
Silicon rubber for mold making applications
1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts ,unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry,
2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Description of platinum cured silicone rubber:
Platinum cure silicone rubber is a kind of translucent liquid, generally named two components silicone rubber with mixing in 1:1. It?s mainly suitable for tire molds making.
Advantage of platinum cure silicone rubber for tire mold:
1) Non-shrinkage
2) High tensile and tear strength with high copy times
3) Exceptional fluidity and good operability (mixing ratio at 1:1)
4) High temperature resistant in 250 Centigrade
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber
Platinum cure silicone rubber is a kind of FDA grade silicone, generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1. It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other food product molds making
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly used for printing irregular patterns on plastic toys, shampoo, pen, glass, electroplating toys and trade makes and so on.
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface.
Pad Printing Silicon Rubber Features:
1)High print times
2)Abrasion resistance.
3)Good printing effects
4)Permanent and durable
For further information, pls contact with Miss Cecilia
TEL: 086-0755-89948013
Mobile: 086-15273276985
Mail : hyyi(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime .
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50 shore A after curing with features :
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
For more information, pls feel free to contact Ms Cecilia
Office No.: 086-0755-89948013
Mob: 86-15273276985
Skype: summertaoteng
Email: hyyi(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: Shenzhen Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for Liquid Silicone rubber
10 to 12months, when stored in a dry and cool place under the room temperature 25.
Packing for Liquid Silicone rubber
1kg/ bottle , 5 kg per drum vacuumed packing, 25kgs per drum vacuumed packing,200 kg per drum
For more information , pls feel free to contact
Mr. Choice
office no. :0086-755-89948013
Mob:86-15200358715
Skype: CDlove-cho.ice
Email :hyyc(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
Any more information , pls feel free to contact
Mr. Choice
office no. :0086-755-89948013
Mob:86-15200358715
Skype: CDlove-cho.ice
Email :hyyc(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8 to 10months, when stored in a dry and cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kgs per drum vacuumed packing
For further information, pls contact with
Mr. Choice
office no. :0086-755-89948013
Mob:86-15200358715
Skype: CDlove-cho.ice
Email :hyyc(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Dromostanolone Propionate |
|
|
Name Dromostanolone propionate
Synonyms 17b-Hydroxy-2a-methyl-5a-androstan-3-one propionate
Molecular Formula C23H36O3
Molecular Weight 360.53
CAS Registry Number 521-12-0
EINECS 208-303-1
17b-Hydroxy-2a-methyl-5a-androstan-3-one propionate Chemical Properties
mp 114-120?C
storage temp. Controlled Substance, -20?C Freezer
CAS DataBase Reference 521-12-0(CAS DataBase Reference)
NIST Chemistry Reference Dromostanolone propionate(521-12-0) |
|
| » Posted by: Hubei MaxSource Chem Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Drostanolone Enanthate / Dromostanolone enanthate |
|
|
Application: pharmaceutical raw materials
transportation :EMS,TNT,DHL,FEDEX,UPS
|
|
| » Posted by: Hubei MaxSource Chem Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Boldenone Undecylenate |
|
|
Name Boldenone undecylenate
Synonyms Boldenone undec-10-enoate; 17b-[(1-Oxo-10-undecenyl)oxy]-androsta-1,4-dien-3-one; 17b-Hydroxyandrosta-1,4-dien-3-one 10-undecenoate Molecular Formula C30H44O3
Molecular Weight 452.67
CAS Registry Number 13103-34-9
EINECS 236-024-5
Boldenone undecylenate Chemical Properties
storage temp. Controlled Substance, -20?C Freezer
CAS DataBase Reference 13103-34-9(CAS DataBase Reference) |
|
| » Posted by: Hubei MaxSource Chem Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Boldenone Base |
|
|
Name Boldenone
Synonyms 1-Dehydrotestosterone; 17b-Hydroxyandrosta-1,4-dien-3-one Molecular Formula C19H26O2
Molecular Weight 286.41
CAS Registry Number 846-48-0
EINECS 212-686-0
Boldenone Chemical Properties
mp 164-166?C
storage temp.
Controlled Substance, -20?C Freezer
CAS DataBase Reference 846-48-0(CAS DataBase Reference)
NIST Chemistry Reference Boldenone(846-48-0)
Safety Information
RTECS BV7994400 |
|
| » Posted by: Hubei MaxSource Chem Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Methenolone Enanthate |
|
|
Name Methenolone enanthate
Synonyms [(5S,8R,9S,10S,13S,14S,17S)-1,10,13-Trimethyl-3-oxo-4,5,6,7,8,9,11,12,14,15,16,17-dodecahydrocyclopenta[a]phenanthren-17-yl] heptanoate Molecular Formula C27H42O3
Molecular Weight 414.62
CAS Registry Number 303-42-4
EINECS 206-141-6
Methenolone enanthate Chemical Properties
CAS DataBase Reference 303-42-4(CAS DataBase Reference) |
|
| » Posted by: Hubei MaxSource Chem Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Methenolone Acetate |
|
|
Name Methenolone acetate
Synonyms 17b-Hydroxy-1-methyl-5alpha-androst-1-en-3-one acetate
Molecular Formula C22H32O3
Molecular Weight 344.49
CAS Registry Number 434-05-9
EINECS 207-097-0
Methenolone acetate Chemical Properties
CAS DataBase Reference 434-05-9(CAS DataBase Reference) |
|
| » Posted by: Hubei MaxSource Chem Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 next»
|
|
