|
|
|
|
|
[Sell]
cold rolling mill 1116 |
 |
|
| LG50-H cold rolling mill Technical parameter of product 1.outer diameter of rough tube:42-90mm 2.wall thickness of rough tube:3-8mm 3.length of rough tube:less than 7000mm 4.outer diameter of finished products:35-80mm 5.wall thickness of finished products:1.8-6mm Technical parameter of machine 1.diameter of roller:320 mm 2.round trip length of operating frame:822mm 3.round trip frequency of operating frame:60-85times/minute 4.feeding amount:3-12mm(double feeding) 5.swing angle of rough tube:54-37 degree (double turning) 6.material loading method:Side loading 7.continuous rolling:No 8.rolling lines:single 9.Power of main motor:DC motor 90KW |
|
» Posted by: Kunshan Yongdeli Machinery Co.,Ltd [China]  |
|
|
|
|
|
[Sell]
Recycling of Single hammer |
|
|
| Place of origin Changzhou.China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material AISI4142 / 42CrMo Port of loading Shanghai Packing Wooden case or Iron case, Carton or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Mining and Tunnelling of Soft hammer |
|
|
| Place of origin Changzhou.China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material AISI4142 / 42CrMo Port of loading Shanghai Packing Wooden case or Iron case, Carton or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Turbocharge /element /VE pump/hed roto |
|
|
| yellow stone diesel ind ltd can supply below item: diesel fuel injection pumps diesel engine fuel injection diesel fuel injection service diesel fuel injection system bosch diesel fuel injection pumps N65 diesel fuel injection nozzle|cat nozzle diesel fuel injection spare parts, head rotor,nozzle,element Common Rail Injector Bosch Cat Cummins Denso Zexel common rail diesel fuel injection find local diesel fuel injection diesel fuel injection equipment Diesel Engine,Diesel generator,Fuel injection pump,water pump ... caterpillar pencil nozzle 8n7005 caterpillar fuel injector-caterpillar nozzle-caterp Diesel fule injection parts bosch denso zexel delphi ... Diesel Engine-4JB102|,Diesel generator,Fuel injection pump,water turbo chargers Manufacturers & Suppliers Common rail injection test bench -CRS200A Diesel Plunger(PS7100,PS8500,EP9,A,AD,P,MW,B) |
|
| » Posted by: Yellow Stone Diesel Ind Ltd [China] |
|
|
|
|
|
[Sell]
cold rolling mill 1103 |
|
|
| LG60-H cold rolling mill Technical parameter of product 1.outer diameter of rough tube:51-92mm 2.wall thickness of rough tube:3-12mm 3.length of rough tube:less than 6000mm 4.outer diameter of finished products:32-76mm 5.wall thickness of finished products:2-10mm Technical parameter of machine 1.diameter of roller:375mm 2.round trip length of operating frame:904mm 3.round trip frequency of operating frame:60-95times/minute 4.feeding amount:3-12mm (double feeding) 5.swing angle of rough tube:31-26 degree(double turning) 6.material loading method:Side loading 7.continuous rolling:No 8.rolling lines:single 9.Power of main motor:DC motor132KW |
|
| » Posted by: Kunshan Yongdeli Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
cold rolling mill 1110 |
|
|
| LG90-H cold rolling mill Technical parameter of product 1.outer diameter of rough tube:65-133mm 2.wall thickness of rough tube:2.5-15mm 3.length of rough tube:less than 6000mm 4.outer diameter of finished products:42-108mm 5.wall thickness of finished products:1.5-12mm Technical parameter of machine 1.diameter of roller:420 mm 2.round trip length of operating frame:1003mm 3.round trip frequency of operating frame:60-82times/minute 4.feeding amount:3-12mm(double feeding) 5.swing angle of rough tube:57 degree(double turning) 6.material loading method:Side loading 7.continuous rolling:No 8.rolling lines:single 9.Power of main motor:DC motor 160KW |
|
| » Posted by: Kunshan Yongdeli Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Rotary Dryer |
|
|
http://www.zcrusher.com/rotary-dryer.html
Rotary dryer introduction:
Drier(Drying Machine) is used for drying materials with a certain humidity or granularity in milling of ores, building materials, metallurgy and chemical industry. Gyro drying machinery has a strong adaptability of materials and it can dry various materials. The operation is very simple and liable. For this reason, it is used widely.
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Rotary Kiln |
|
|
http://www.zcrusher.com/rotary-kiln.html
Rotary kiln introduction:
Rotary kiln is composed of cylinder, gears, support device, kiln liner and kiln tail sealing equipment, kiln head hood and combustion.Cylinder as heated pivoting part, made of high-quality carbon steel plate, is supported on the support device by tyre, and there is machanical or hydraulic pressure catch wheel on the first or some gear in order to control the turning of cylinder. Gearing gyrate according to process-required rotating speed by ring gear in the middle of cylinder. Because of the need of installation or maintenance, the bigger rotary kiln has auxiliary gears, which makes cylinder gyrate more slowly. To prevent cold air come in and dust overflow, the reliable kiln tail and head sealing equipment is installed on feed and discharge end.
Rotary kiln application:
Rotary kiln is Thermal Equipment, heating materials, it is widely used in the fields of cement, Nonferrous Metallurgy, ferrous metallurgy, refractory material, chemical materials, paper making.
Product feature:
1. Support device: advanced shaft structure, automatic temperature measuring device and electrical heating,.
2. Catch wheel : including two kinds mechanical wheel and hydraulic pressure
3. Gears: single or double. Control the rotating speed by buncher, DE machine and frequency variable motor. Be reliable , energy-saving, and efficient.
4. Cylinder tyre bolster: lower bolster has three types: fixed , zoom and floating. The structure is simple , replacement is convenient and won��t hurt cylinder.
5. Sealing equipment: there are many kinds for choice according to kiln models, including air cylinder edge sealing, spring edge sealing , graphite block sealing and combination for above. The feather is adaptive for cylinder rotating and swing. And sealing effect is very good.
6. Kiln head hood: including stationary type and flexible type.
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
high quality Blocks Holders |
|
|
| Place of origin Changzhou, China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material 4142H / 42CrMo Port of loading Shanghai Packing Wooden case, Iron case or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
low price Stump Grinder Teeth |
|
|
| Alloy steel Body, made by material ASTM4142 or 42CrMo, heat treatment with high strength. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working. The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed. Place of origin Changzhou.China Application tree stump cutting,wood shredding,stone crushing at road construction Certification ISO9001:2008 Material ASTM4142 / 42CrMo Port of loading Shanghai Packing Wooden case or Iron case, Carton or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
sell various Fertilizer machinery |
|
|
| Q.H.D Sannong Modern Mechanical Equipment Co.,Ltd is a high-tech manufacturer of bulk blending (BB) fertilizer equipments and ration packaging equipments. As the initiate of BB fertilizer concept and holder of numbers of national patents. Sannong is the leading corporation for product innovation and technology upgrading in the bulk blending (BB) fertilizer equipments industry in china from the day of its foundation. |
|
| » Posted by: Qinhaungdao Sannong Modern Mechnical Equipment Co., Ltd [China] |
|
|
|
|
|
[Sell]
low price Mining Flat Tooth |
|
|
| Place of origin Changzhou.China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material AISI4142 / 42CrMo Port of loading Shanghai Packing Wooden case or Iron case, Carton or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Belt Stripped Machine |
|
|
No.1 usage:
It can be used as core of various fabrics, plastic canvas rope of steel cord conveyor belt and the decision between the canvases.
No.2 Product advantages:
1. High efficiency, low labor intensity, light in weight, applicable to different types of environment;
2. Unique domestically, advanced internationally.
No.3 Technical parameters:
1. Power supply: voltage 380V 50Hz;
2. Power: 3 KW;
3. Weight: 96 kg;
4. Applicable Range: EP, NN, and the joint layers of cotton & canvas layered.
No.4 Method of usage:
1. Firstly, please peel off about 15cm width steel wire at the end from the wire rope conveyer belt. Remove off rubber from the both sides, and then fixed the adhesive tape.
2. Secondly, please install the up and down blades, and put the down blade right on the wire rope center, and adjust the pressure of the bolt, and then press the handles, and connect the wire rope with drag machine to work, and bring along the blade to make the rubber layer disengage from the rope, and the end of stripping.
|
|
| » Posted by: Jiangsu Chenggong Machinery Manufacturing Co., LTD [China] |
|
|
|
|
|
[Sell]
Conveyor Belt Stripped Machine |
|
|
No.1 usage:
It can be used as core of various fabrics, plastic canvas rope of steel cord conveyor belt and the decision between the canvases.
No.2 Product advantages:
1. High efficiency, low labor intensity, light in weight, applicable to different types of environment;
2. Unique domestically, advanced internationally.
No.3 Technical parameters:
1. Power supply: voltage 380V 50Hz;
2. Power: 3 KW;
3. Weight: 96 kg;
4. Applicable Range: EP, NN, and the joint layers of cotton & canvas layered.
No.4 Method of usage:
1. Firstly, please peel off about 15cm width steel wire at the end from the wire rope conveyer belt. Remove off rubber from the both sides, and then fixed the adhesive tape.
2. Secondly, please install the up and down blades, and put the down blade right on the wire rope center, and adjust the pressure of the bolt, and then press the handles, and connect the wire rope with drag machine to work, and bring along the blade to make the rubber layer disengage from the rope, and the end of stripping.
|
|
| » Posted by: Jiangsu Chenggong Machinery Manufacturing Co., LTD [China] |
|
|
|
|
|
[Sell]
Pvc / Pu Conveyor Belt Jointing press |
|
|
Technical Parameter:
1. Vulcanization pressure: 0.2 Mpa;
2. Vulcanization temperature: 145 centigrade degree;
3. Difference in surface temperature of vulcanized plate: ± 5 centigrade degree;
4. Calefactive time (at normal temperature to 145 degree): ≤30 mins;
5. Power supply voltage: 220V, 380 v, 415V, 440V, 550V, 660V. 50Hz;
6. Output power of Electronic Control Box: 7.5 KW;
7. Temperature adjustment range: 0 to 200 centigrade degree;
8. Timing adjustment range: 0 to 99 mins;
|
|
| » Posted by: Jiangsu Chenggong Machinery Manufacturing Co., LTD [China] |
|
|
|
|
|
[Sell]
vulcanizing press |
|
|
Technical Parameters:
1. Vulcanization pressure: 1.0-2.0 Mpa;
2. Vulcanization temperature: 145 C ;
3. Difference in surface temperature of vulcanized plate: ± 5 degree;
4. Calefactive time (at normal temperature to 145 ): ≤30 mins;
5. Power supply voltage: 220V to 660 v; 50/60 Hz; 3Ph;
6. Output power of Electronic Control Cabinet ≤36 KW;
7. Temperature adjustment range: 0 to 200 ;
8. Timing adjustment range: 0 to 99 min;
9. After the pressurization of 0.8 MPa, the gap between upper and lower heating plate is not more than 0.4 mm.
We can manufacture conveyor belt vulcanizers from 650mm to 2600mm of the conveyor belt width.
|
|
| » Posted by: Jiangsu Chenggong Machinery Manufacturing Co., LTD [China] |
|
|
|
|
|
[Sell]
Rod Mill |
|
|
http://www.zcrusher.com/rod-mill.html
Rod mill introduction:
Our company has always devoted to technology research of machinery equipment for many years, and the factory of Rod Mill specializes in producing Rod Mill of every kind. It has the best production equipment, outstanding technical research and development team and produces the best Rod Mill for you. Experts with rich experience in Rod Mill provide specialized process information about Rod Mill for you. This is the ideal choice for you to invest mineral processing industry.
Rod mill application:
MBS Rod Mill has two types---- dry type and wet type for users to choose according to the actual needs.
Our company adopts advanced controllable feeding and discharging technology, integrates actual grinding material which should be equipped with proper grinding body to change traditional surface contact into line contact, and this makes discharging size more homogeneous and output higher. So it is widely used in the industries such as refractory material, chemical, metallurgy and glass and so on. And it is used for grinding operation which has a high requirement on homogeneity of grinded products . In recent years, it is also used for sand making in the industry of construction.
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Ball Mill |
|
|
http://www.zcrusher.com/ball-mill.html
The ball mill is suitable in the powder rubs each kind of ore and other materials, the balll mill is widely used in the dressing, professions, building materials and chemical industry and so on. It is divided into two rubbing way-the dry and the wet .There are two kinds of ball mill, grate type and overfall type due to different ways of discharging material. The ball mill is a key equipment to grind the crushed materials after the material were broken , and carrying on the smashing again. and the ball mill is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc,the ball mill carries on the dry type or the wet powder to each kind of ore and other grindability material rubs.
Working Principle:
The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.
Ball Mill Application:
The ball mill is a key equipment for regrinding. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Our ball mill can grind ore or other materials that can be grinded either by wet process or by dry process.
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
high quality Core Barrel Tooth |
|
|
| Place of origin Changzhou.China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material AISI4142 / 42CrMo Port of loading Shanghai Packing Wooden case or Iron case, Carton or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
sell various Fertilizer machinery |
|
|
| Q.H.D Sannong Modern Mechanical Equipment Co.,Ltd is a high-tech manufacturer of bulk blending (BB) fertilizer equipments and ration packaging equipments. As the initiate of BB fertilizer concept and holder of numbers of national patents. Sannong is the leading corporation for product innovation and technology upgrading in the bulk blending (BB) fertilizer equipments industry in china from the day of its foundation. |
|
| » Posted by: Qinhaungdao Sannong Modern Mechnical Equipment Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
