|
|
|
|
|
|
|
[Sell]
BMW OPS |
 |
|
On vehicle models from the E65 on, BMW is for the first time using fibre-optic cables as standard for communication between control units.
The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the MOST bus, primarily used for in-car entertainment electronics, and the byteflight bus, which serves predominantly safety-critical functions.
OPPS has been designed for encoding, individualising and programming ( CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) from DISPlus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.
OPS is intended for rapid programming of control units.
When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPPS / OPS.
D-CAN included for diagnose on the following models:
- E60, E61 as of model year 03/2007
- E83 as of model year 09/2006
- E81, E87 as of model year 03/2007
- E90, E91, E92, E93 as of model year 03/2007
- E70 (new X5)
- R56 (new MINI)
Package including:
1 X OPS head
1 X 16 Pin Cable CAN BUS
1 X LAN cable (RJ45 ODU plug)
1 X Fiber Cable
|
|
» Posted by: OBDSVS [China]  |
|
|
|
|
|
[Sell]
Renault CAN Clip Diagnostic |
|
|
Clip's main menu allows you to:
• see all the information relating to the vehicle
• look at the function you want to use:- computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
• CAN Clip Interface
• 2 cables for CAN Clip <-> Car connection
• 1 cable for CAN Clip <-> PC connection
• 1 software CD (CLIP V85, can be installed on ANY PC)
It's very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V.I.N. and press ENTER.
The lastes version: V85
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
Peugeot /Lexia-3 |
|
|
Dealer level diagnostic device for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnose is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Supported functions
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
FUNCTIONS SUPPORT
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
NOTEBOOK READY TO WORK (optional)
Package includes:
* Main interface 2in1
* Power supply (110-220V)
* OBD-2 cable
* ISO cable for cars before 2001
* USB cable
* CD Peugeot V.22
* CD Citroen V.45 |
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
VAS5054A |
|
|
The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers. The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system. No cables are needed for vehicle diagnostics using the VAS 5054A.
The range of the wireless Bluetooth connection is 5 to 10 meters, depending on the environment and the type of Bluetooth adapter used on the PC side. The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.
The following vehicle bus systems are supported:
1.K line (ISO9141-2)
2.High-speed CAN (ISO 11898-2)
3.Low-speed CAN (ISO 11898-3)
4.J1850 (SAE J1850)
The vehicle protocols are handled directly in the VAS 5054A.
This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is synchonized with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.
The diagnostic application and the associated Diagnostic Base System are installed on the application PC. The Diagnostic Base System can access the VAS 5054A via Bluetooth or USB.
Package including:
Diagnostic radio head VAS5054A original
Software VAS5052A PC version with registration
PC / LAPTOP IBM ready to work
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
TWINB for BENZ and BMW |
|
|
TwinB has all functions of Benz C3 and Bmw GT1.
TwinB is our lastest and most hot products now. TwinB includes and MB Star C4 and TwinB GT1 Pro, which is small and has all functions of GT1. Only one hard disk contains three kinds of software DAS, DIS and SSS.
TwinB Star C4:
1. TwinB Star C4 can be available for any kind of computer.
2. TwinB Star C4 has rs232/485 interface, which can connect with touch screen and also common screen.
3. TwinB Star C4 can work in the voltage of 12V/24V.
4. TwinB Star C4 can supply power to the computer by Power Cable.
TwinB GT1 Pro:
a.Self-protection: GT1 Pro Multiplexer will be turned off by itself if the voltage surpasses 15.8V during your testing, and it will restart if the voltage below 15.8V autometically.
b. TwinB GT1 Pro uses the newest software DK219.
c. TwinB GT1 Pro can also supply power to the computer by the interface of the LAN cable.
TwinB is very small and convenient to carry. It is very useful for site operation
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
Launch CReader V |
|
|
CReaderV is newly developed by LAUNCH, specially designed for car owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD. It not only can read/clear DTCs, but also can read live data in 2 modes, and perform many special tests. Tri-languages make it operation easily for a technician. The feature of upgrading online ensures it can test new model cars and/or functions in the future.
Fuction
1. Read Codes
2. Erase Codes
3. View Freeze Data
4. Data Stream
Entire Data list
Custom Data list
5. Special Tests
I/M Readiness
MIL Status
O2 Sensor Test
On-board monitor test
EVAP system test
Vehicle Info
6. Code Lookup
Display: Backlit, 160 x 160 pixels
Operating Temperature: 0 to 60°C (32 to 140 F°)
Storage Temperature: -20 to 70°C (-4 to 158 F°)
Power: 8 to 18 Volts provided via DLC
Unit Dimensions: 126 mm×88 mm×22 mm（Length×Width×Thickness）
Test Cable length: 0.9m
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
US703 CODE READER |
|
|
The US703 advanced vehicle scan tool is a must for the professional mechanic , its advanced, easy to use and come with an array of features. The US703 gives clear, concise DTC definitions on its large back-lit LCD screen, enables fast and easy access to your engine management system where engine and emission related diagnostic trouble codes are stored , it also allows you to turn off your malfunction indicator light (MIL), stores freeze frame data (for later viewing) and reads P0 P2 P3 and U0 codes as well and manufacture P1 P3 and U1 codes.Powered by Uni-SCAN technology, The US703 is an innovative multi-functional scan tool designed to troubleshoot engine, transmission, ABS and airbag systems for GM/Ford/Chrysler vehicles. Reliable, easy-to-use and affordable.
This item comes with the latest firmware (latest available updates applied).
Product Features & Functions
Troubleshoots engine, ABS, transmission and airbags codes
Global OBDII/EOBD coverage(US, Asian & European)
Powered by Uni-SCAN technology
Supports all nine test modes of the latest J1979 OBD II test specs
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Displays DTC definitions on unit screen
Views freeze frame data
Displays O2 sensor data as well as live datastream parameters
Data graphing (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports all current OBD-II protocols, including CAN
(Controller Area Network)
Extremely easy to use and highly reliable
Trilingual supportEnglish, Spanish, French or other
combinations
Software upgradeable via internet
Built-in OBD-II DTC lookup library
Prints data via PC
Works with the following
Gm 1994-2006
Ford 1994-2006
Chrysler 1998-2006
Global OBDII/EOBD coverage(US, Asian & European) Works as a generic fault code reader
Included in this package
US703 code reader
OBD II connector
USB update cable
Carry case
Hard copy manual and update cd
Extension cable
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
GS500 Scanner |
|
|
The MaxScan GS500 is the best solution to troubleshoot all 1996 and newer OBD2 Compliant vehicles. The scan tool delivers all nine OBD-II test modes,retriving live engine datastreanm and parameters to enable technicians accurately diagnose the toughest problems.
It can do:
Reads&Clears trouble codes
Reads live PCM data stream
Displays 02 sensor test data
Detects OBD2 Freeze frame data
Supported Standards
ISO 15765-4 - CAN-Bus
SAE J2480 - CAN-Bus
ISO 14230-4 - KWP 2000
ISO 9141
ISO 9141-2
SAE J1850 - VPW
SAE J1850 PWM
Product Features
Works with all 1996 and later OBD IIcompliant US, European and Asian vehicles.
Reads&clears generic OBD II trouble codes( including pending codes)
Reads&cLears selected GM/Ford/Chrysler/Toyota OBD II manufacture-specific codes
Tums off check engine light(MIL)
Views Freeze Frame Data
Displays Monitor and I/M readiness status(emissions)
Reads live 02 senor test data
Performs Modules Present Test
Retrieves Vehicle information (VIN,CIN and CVN)
Supports CAN( Controller Area Network) and all tother current OBD-IIProtocols.
Built-in OBD-II DTC lookup library
Large easy-to-read LCD sreen displays DTC definitions
Extremely easy to use and highly reliable |
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
VAG 405 Code Reader |
|
|
The MaxScan VAG405 code scanner is an OEM level diagnostic scan tool for most VW/AUDIs sold worldwide since 1990 to present INC CAN BUS. Accurate, reliable and
easy to use, It can access MOST modules, the MaxScan VAG405 is a time saver and a money maker!
It also doubles up as a Generic OBD2 fault code reader for most other manufacturers.. (Engine DTC Check)
Features & Benefits
1. Works with Volkswagen and Audi(Audi/Seat/Skoda/Jetta/Golf/Beetle/Touareg/GTI/ Passat and more) sold worldwide since 1990
2. Reads and erases Diagnostic Trouble Codes (DTCs) of most electronically controlled vehicle modules, including Engine, ABS, Airbags, Transmission, Radio, Climate
Control(A/C), Cent.Elect. Steering Wheel, Instruments, Immobilizer, etc.
3. Reads and clears generic trouble codes of cars using ISO 9141-2 ("CARB"), ISO 14230 ("KWP-2000") and ISO-15765 ("CAN") protocols.
4. Turns off MIL lights of engine, airbags, ABS , A/T and most other systems
5. C.A.N.(Controller Area Network) Capability
6. Resets oil service light
7. Retrieves vehicle information (VIN)
8. Displays I/M Readiness Status.
9. Displays DTC definitions on Unit Screen
10. Highly reliable and accurate
11. Easy to use with friendly interface
12. Safely communicates with the on-board computers
13. Large, easy-to-read backlit LCD
14. System Upgradeable via internet
15. Stand-alone unit with no need for an additional laptop computer to operate
This Tool performs as a FULL diagnostic tool for VAG range and as a Generic Fault Code Reader for other Vehicles that are OBD2 complient..
Package Includes:
MaxScan VAG 405 HandHeld Scanner
Carry/Storage Case
16 Pin OBD 2 Data Link cable
USB cable for updates
User Manual
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
SBB key programmer |
|
|
) Latest Version: 23.01.111.
2) Making New Keys without token!
3) Multi - Languages - 9 kinds of language for you to choose:
German, French, Italian, English, Spanish, Portuguese, Russian, Greek, Turkish.
4) Available making keys for new car models (NO PINCODE) : Ford(need wait 800 seconds to finish), Suzuki and VAG CAN SYSTEM.
5) With inner database, it's very easy to check out the car models, transponder codes and the position for Immo box.
6) Using universal Port Cable, it can be updated on line.
Description:
SBB is a new device used as a portable unit for programming keys in immobilizer units on vehicles.
Due to its integrated hardware SBB needs no more than the OBDII cable provided to carry out a wide range of functions:
programming new keys
reading keys from immobilizer's memory
deactivating keys no longer in the car owner's possession
operation by means of a menu guided programming
programming new remote controls
software with full database containing all the most important vehicle makes
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
AK400 key maker |
|
|
IR-Programmer(for Benz key)+Hitg2 programmer(for BMW key)+BEZN ESL(election steering lock)K-Line programmer+912/9S12 in circiut programmer+68HC711 pragrammer+68HC705/05 programmer+68HC908 programmer+9CXX/95PXX/24CXX s-eprom programmer+BENZ key reader+BMW key reader
Description
All in one intelligence BENZ/BMW smart key maker
BENZ:W220/W208/W210/W220/W203/W215/W230/W209/W219/W211/W230/W215(Big old key/Black key/Chrome key)
BMW:new 1/3/5/6/7 CAS/CAS2/CAS3/CAS3+system
1.Programming Benz smart key via infrared or on board programming,even the car lost all the key.
2.Read/Write BENZ ESL(election steering lock)via K-Line,no need take out ESL from the car.
3.Unlock BEZN ESL(election steering lock)via K-Ling with out key.
4.Read/Write BENZ ESL(key IG module)/BMW CAS/CAS2/CAS3 via ICP(no need take out MCU).
5.Renew smart key function,renew used benz samrt key.
6.Check status of Benz/Bmw smart key before/after programmer
7.Renew Benz ME-ECU function.
8.Active ME2.0 ECU(4E28B),not need renew ECU
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
AK500 |
|
|
AK-500 is a carefully designed multi-purpose vehicle intelligent programming system that can adapt to a very good variety of programming environments. This product is a high degree of intelligence to realize the automatic programming function. AK-500 is a specialized vehicle to meet the modern high-level computer programming complex, high-efficiency and the development of a new generation of intelligent car computer programming system.
Product parameters:
Online Communication Interface: USB2.
Power Specifications: AC Input 100-240V, 50/60HZ; output 12V/2A DC power consumption: 40W ;
Host Size: 2100 * 1450 * 400 mm; Weight: 1 kg
Standard configuration:
AK500 Host (1 PCS); 64G U disk or mobile hard disk 40G (1 PCS); HC705 Adapter folder (1 PCS)); AK500 CONNECTOR cable (1 PCS)); ESL links (1 PCS)); 12V/2A Switching Power Supply (1 PCS)); USB communications cable (1 PCS); MPC Adapter board (2 PCS); 4E28B Block Adapter (1 PCS) EEPROM Adapter folder(1 PCS) |
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
Tacho 2008 |
|
|
Tacho V2008 is the most sold programming-device for digital speedometers worldwide. The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation. You can serve almost any vehicle with the Tacho V2008.
Specification
Outstanding characteristics of our programming system are:
1.The current odometer reading is decoded and shown in the LCD display
2.Easy self explanitory operation by clear menu guidance
3.Backlit display makes working possible in overcast conditions
4.All datasets can be edited, saved and loaded
5.The stored data can be transferred to a PC for archiving
6.Up to 200 files can be stored in the Tacho Universal
7.Broken speedometers can be repaired comfortably
8.You receive further developed software from us by Internet
9.New types and manufacturers can be released within seconds by telephone. There is no need to send the unit to us.
|
|
| » Posted by: OBDSVS [China] |
|
|
|
|
|
[Sell]
Sell Industry Spray Nozzle |
|
|
| We make and sell spray nozzles are: Fog Nozzle, Fog Misting Nozzle, Impingement Misting Nozzle, Air Atomizing Nozzle, Spiral Nozzle, Flat Fan Spray Nozzle, Solid Cone Spray Nozzle, Hollow Cone Spray Nozzle/ Full Cone Spray Nozzle, Flood Jet Nozzle, High Pressure Nozzle, Tank Washing Nozzle, Silicone Carbide Nozzle, Sand Blasting Nozzle, Filter Nozzle, Plastic Adjustable Ball(Clamp) Nozzle, Clip Eyelet Nozzles,WindJet Nozzle, Mixing Eductors, Plastic Nozzles, PP Nozzle, Telflon Nozzle, PVC Nozzle, PVDF Nozzle, ABS Nozzle, Ceramic Nozzles and so on. |
|
| » Posted by: Ideal Spray Tech. Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Brother-L Type MoSi2 Heating Element |
|
|
Molybdenum disilicide (MoSi2) heating element is a resistance generate-heating component made from MoSi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light SiO2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800C during oxidizing atmosphere. According to your request, our company can produce the products of Pole, "U", "W" and "U"-right angle shapes, etc.
MoSi2 heating element can usually make use of furnace temperature from 1300C to 1800C. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature.
Now our company supply two types MoSi2 heating elements, one is M1700 type, which ensure max. furnace temperature 1650C; another is M1800 type, which ensure max. furnace temperature 1700C. When you place order, please choose suitable type according to your furnace working temperature.
► M1700 (heat furnace temperature 1650.C )
► M1800 (heat furnace temperature 1700.C)
Standard sizes:
M1700 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
M1800 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
|
|
| » Posted by: Zhengzhou Brother Furnace Co.,LTD [China] |
|
|
|
|
|
[Sell]
Brother-W Type MoSi2 Heating Element |
|
|
Molybdenum disilicide (MoSi2) heating element is a resistance generate-heating component made from MoSi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light SiO2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800C during oxidizing atmosphere. According to your request, our company can produce the products of Pole, "U", "W" and "U"-right angle shapes, etc.
MoSi2 heating element can usually make use of furnace temperature from 1300C to 1800C. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature.
Now our company supply two types MoSi2 heating elements, one is M1700 type, which ensure max. furnace temperature 1650C; another is M1800 type, which ensure max. furnace temperature 1700C. When you place order, please choose suitable type according to your furnace working temperature.
► M1700 (heat furnace temperature 1650.C )
► M1800 (heat furnace temperature 1700.C)
Standard sizes:
M1700 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
M1800 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
|
|
| » Posted by: Zhengzhou Brother Furnace Co.,LTD [China] |
|
|
|
|
|
[Sell]
MoSi2 Heating Element |
|
|
Molybdenum disilicide (MoSi2) heating element is a resistance generate-heating component made from MoSi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light SiO2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800C during oxidizing atmosphere. According to your request, our company can produce the products of Pole, "U", "W" and "U"-right angle shapes, etc.
MoSi2 heating element can usually make use of furnace temperature from 1300C to 1800C. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature
Now our company supply two types MoSi2 heating elements, one is M1700 type, which ensure max. furnace temperature 1650C; another is M1800 type, which ensure max. furnace temperature 1700C. When you place order, please choose suitable type according to your furnace working temperature.
► M1700 (heat furnace temperature 1650.C )
► M1800 (heat furnace temperature 1700.C)
Standard sizes:
M1700 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
M1800 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
|
|
| » Posted by: Zhengzhou Brother Furnace Co.,LTD [China] |
|
|
|
|
|
[Sell]
XD-1600MT Tube Furnaces |
|
|
Inside Chamber Size dia60x300mm(diameter2.5" x 12")
Standard Working Temperature 1600.C ( continuous )
Maximum Working Temperature 1650.C ( < 3 hrs)
Temperature Control 30 steps programmable and PID automatic control
Heating Rate 0~10.C / min (suggestion: =< 10.C)
Temperature Accuracy + 1.C
Heating Element MoSi2 heating elements
Working Voltage AC 220V Single Phase 60/50 Hz (or according to your requirement)
Max. Power 5 KW
Net Weight 150 Kg
Note: The furnace tube is High purity Al2O3 ceramic
Dia60mm means outer diameter, inner diameter is about 52mm
300mm means the length of hot zone
Total length is 1000mm
XD-1600MT tube furnace is a precision bench-top furnace using quality ceramic MoSi2 rods as heating elements. It is widely used for materials or chemical lab to sinter all types of new materials samples under vacuum or other gases condition. It is controlled by high precision SCR ( Silicon Controlled Rectifier) digital controller with accuracy +/-1.C and 30 segments programmable up to 1600.C.
Standard Sizes:
Model Chamber size Max. Temperature
XD-1600MT Dia40x300mm (1.5"x12") 1600.C
XD-1600MT Dia40x450mm (1.5"x18") 1600.C
XD-1600MT Dia60x300mm (2.5"x12") 1600.C
XD-1600MT Dia60x450mm (2.5"x18") 1600.C
XD-1600MT Dia80x300mm (3.0"x12") 1600.C
XD-1600MT Dia80x450mm (3.0"x18") 1600.C
XD-1600MT Dia100x450mm (4.0"x18") 1600.C
|
|
| » Posted by: Zhengzhou Brother Furnace Co.,LTD [China] |
|
|
|
|
|
[Sell]
XD-1200NT Tube Furnaces |
|
|
Inside Chamber Size dia60x300mm(diameter2.5" x 12")
Standard Working Temperature 1100.C ( continuous )
Maximum Working Temperature 1200.C ( < 3 hrs)
Temperature Control 30 steps programmable and PID automatic control
Heating Rate 0~10.C/ min (suggestion: =< 10.C)
Temperature Accuracy + 1.C
Heating Element Fe-Cr-Al resistance wire
Working Voltage AC 220V Single Phase 60/50 Hz (or according to your requirement)
Max. Power 2 KW
Net Weight 70 Kg
Note: The furnace tube is quatz tube
Dia60mm means outer diameter, inner diameter is about 54mm
300mm means the length of hot zone
Total length is 1000mm
Standard Sizes:
Model Chamber size Max. Temperature
Brother-1200NT Dia40x300mm (1.5"x12") 1200.C
Brother-1200NT Dia40x450mm (1.5"x18") 1200.C
Brother-1200NT Dia60x300mm (2.5"x12") 1200.C
Brother-1200NT Dia60x450mm (2.5"x18") 1200.C
Brother-1200NT Dia80x300mm (3.0"x12") 1200.C
Brother-1200NT Dia80x450mm (3.0"x18") 1200.C
Brother-1200NT Dia100x450mm (4.0"x18") 1200.C
|
|
| » Posted by: Zhengzhou Brother Furnace Co.,LTD [China] |
|
|
|
|
|
[Sell]
XD-1600BL Bottom Loading Furnace |
|
|
Inside Chamber Size
200 x 200 x 200 mm (8"x8"x8", 8 Liter)
Standard Working Temperature
1600oC ( continuous )
Maximum Working Temperature
1700oC ( < 3 hrs)
Temperature Control
30 steps programmable and PID automatic control
Heating Rate
0~ 10.C/ min (suggestion: =< 10.C )
Temperature Accuracy
+/- 1 .C
Heating Element
MoSi2 heating elements
Working Voltage
AC 380V Three Phases 60/50 Hz (or according to your requirement)
Max. Power
9 KW
Outside Size
700 x 800 x 1600 mm
Net Weight
300 Kg
XD-1600BL The single zone, high temperature, bottom loading furnace is capable of operating at temperatures up to 1650oC in air. The furnace utilizes 1800oC molydisilicide heating elements positioned on three sides of the internal chamber. The furnace utilizes an energy efficient insulation package consisting of graded ceramic-fiber, high temperature insulation. It is an ideal tool for materials annealing and sintering.
Standard Sizes:
Model
Chamber size(WxHxDmm)
Max. Temperature
XD-1600BL
150x150x 150mm (6"x6"x6")
1650.C
XD-1600BL
150x150x 200mm (6"x6"x8")
1650.C
XD-1600BL
200x200x 200mm (8"x8"x8")
1650.C
XD-1600BL
200x200x 300mm (8"x8"x12")
1650.C
XD-1600BL
250x250x 300mm (10"x10"x12")
1650.C
XD-1600BL
300x300x 400mm (12"x12"x16")
1650.C
XD-1600BL
400x400x 400mm (16"x16"x16")
1650.C
XD-1600BL
500x500x 500mm (20"x20"x20")
1650.C
|
|
| » Posted by: Zhengzhou Brother Furnace Co.,LTD [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
|
