|
|
|
|
|
|
|
[Sell]
laser lamp |
 |
|
| laser lamp, arc lamp, flashlamp, Ke lamp, Xe lamp |
|
» Posted by: Sintec Optronics Pte Ltd [Singapore]  |
|
|
|
|
|
[Sell]
mirror and lens |
|
|
| Supply all laser optics such as mirror, output coupler, focusing lens, scan lens, f-theta lens, beam expander |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
Green laser pointer |
|
|
| Supply green laser pointer |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
CO2 laser |
|
|
| Supply air- and water-cooled RF-excited CO2 lasers. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
laser power supply |
|
|
| Supply CW and pulse laser power supply. They are used to driver Kr arc lamp and Xe flashlamps. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
Q-switch and RF driver |
|
|
| Supply AO and EO Q-switches and their drivers. The acousto-optical Q-switch often used in the laser marking makes use of mutual interaction between an ultrasonic wave and a light beam in a scattering medium. The light beam that enters in a direction forming a Bragg angle to the wave surface of the acoustic wave in the scattering medium is diffracted in accordance with periodic changes in the diffraction rate produced by the acoustic wave. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
laser marking head |
|
|
| A laser marking head consists of two scan mirrors, two galvanometers (or called galvo-scanner motor) & drive cards, two cables, a XY mount, a scanning lens (f-theta lens), an interface card and a set of marking software. Two types of scanning optics for CO2 and Nd:YAG lasers are available. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
laser pump chamber |
|
|
| Laser pump chamber is used in solid-state lasers. Single or dual lamp high-efficiency laser pump chambers can accommodate laser rods of 3 to 10mm in diameter and up to 180mm in length. There are gold-coated chambers and ceramic pump chambers. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
Laser marking system |
|
|
| Supply CO2 and YAG laser marking systems. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
supply lasers and laser components |
|
|
| specialized in laser, optics & laser part - Nd:YAG laser, CO2 laser, mirror, output coupler, scanning lens (f-theta lens), focusing lens, beam expander, mirror mount, AOM, galvanometer, Q-switch & driver, chiller, pump chamber, ceramic reflector, stage, flashlamp, arc lamp, laser power supply, Nd:YAG rod, energy/power meter, laser diode, red diode, green laser pointer, laser safety goggles, CNC control software, laser marking head & software & D/A card, fiber, UV glass filter. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
wire straightening and cutting machine |
|
|
Features
1.These Machines are designed for straightening-measure-cutting any kinds of metal wire/bar or non - metal wire/bar such as, steel bar for construction, welding rods, netting - wire, fan netting hanger, refrigerator netting, shopping basket, shoes rack, book stand, domestic fowls cage, record stand and the other kinds of steel wire etc.
2. These machines are easy to operate. You just fix the adjuster of the desired length, and feed the wire/bar into the machine, then the machine automatically produce straight wire/bar of uniformed length at a high speed. Moreover, it rotates smoothly and noiselessly, precise in its measure and strong in its structure.
3. During the operation, the feeding of wire/bar and the cutting action are ceaselessly continued by the shifting of a cutter cooperatively.
Specifications:
Model JSC-1 JSC-2 JSC-3 JSC-4
Wire diameter (mm ) 1.5~3.5 3~6 5~8 7~12
Length of wire (mm) 40-4000 40-4000 40-4000 40-4000
speed (m/mine) 40 40 40 40
Motor (HP) 1+1/2 1+2 10 2+20
Remark:We can accept customer's special requirements
|
|
» Posted by: Joy Wire Mesh Machine Co., Ltd [China]  |
|
|
|
|
|
[Sell]
electric welding net machine |
|
|
AHD4T Type Electric Welding Net Machine
Size of mesh (mm) 6.35-12.7 (1/4"-1/2")
Width (mm) 914.4-1219.2(36"-48")
Diameter of wire (mm) dia.0.45-dia.1.07 (BWG25-BWG19)
Biggest rolled net size (m) 120m (400')
Welding speed (mesh/minute) 75 (radia)
Power 380/220V, 50-60HZ, 50KWA x 4
Outside size measurement (mm) 2350 x 1820 x 1700
AHD6T Type Electric Welding Net Machine
Peculiarity: Shuttle sending weft wire type, sending quicker, lower noise, more stable, save electricity.Used for welding net of big width. Wire diameter from 0.7mm to 1.07mm; mesh 1/4" to 1/2".
Size of mesh (mm) 6.35-12.7 (1/4"-1/2")
Width (mm) 1219.2-1828.8(48"-60")
Diameter of wire (mm) dia.0.74-dia.1.07 (BWG22-BWG19)
Biggest rolled net size (m) 120m (400')
Welding speed (mesh/minute) 48 (radia)
Power 380/220V, 50-60HZ, 50KWA x 6
Outside size measurement (mm) 3050 x 1900 x 1750
AHK4 Type Electric Welding Net Machine
Peculiarity: Box-style support, high stability, lower noise, E-machine in one, straighten and send wire automatically, used for welded wire mesh 1/2" to 4".
Size of mesh (mm) 12.7-101.6 (1/2"-4")
Width (mm) 914.4-1219.2(12"-48")
Diameter of wire (mm) dia.0.63-dia.2(BWG25-BWG19)
Biggest rolled net size (m) 120m (400')
Welding speed (mesh/minute) 65 (radia)
Power 380/220V, 50-60HZ, 50KWA x 4
Outside size measurement (mm) 2600 x 1700 x 1350
AHK6T Type Electric Welding Net Machine
Peculiarity: Box-style support, high stability, lower noise, E-machine in one, straighten and send wire automatically, used for welded wire mesh of big width and wire diameter.
Size of mesh (mm) 25.4-152.4 (1"-6")
Width (mm) 1219.2 1524 1828.8(48" 60" 72")
Diameter of wire (mm) dia.1.07-dia.2 (BWG19-BWG14)
Biggest rolled net size (m) 91.4m (300')
Welding speed (mesh/minute) 45 (radia)
Power 380/220V, 50-60HZ, 50KWA x 6
Outside size measurement (mm) 3350 x 1800 x 1400
|
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
automatic fence mesh welding machine |
|
|
Description:
1. Spot Welding System
Adjusting the electrodes,and fixture based on the wire pitch.Possible individually set welding time and current.
2. Wire Auto System
The line and cross wires are rhythmically welded as desired.The speed of welding is controlled through the control panel.
3. Controlling System
Equipped with man-machine interface windows based for the use of PLC,all the parameters and figures set on the screen.Easy for operators running and maintenance.
Application:
The fence mesh welding machine is to weld fence mesh used in highway, freeway, and residense for protection.
Specifications.
Wire Diameter 3-5mm Rated Voltage 380V
Mesh Opening 50*50-300*300mm Rated Electrical Power 400KVA
Width 2000mm 2500mm Welding Speed 30 times/minute
|
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
industrial mesh welding machine |
|
|
Industrial mesh welding machine
Description:
1. Spot Welding System
Adjusting the electrodes,and fixture based on the wire pitch.Possible individually set welding time and current.
2. Wire Auto System
The line and cross wires are rhythmically welded as desired.The speed of welding is controlled through the control panel.
Application:
The wire mesh welding machine or the wire mesh welder is to weld & produce welded mesh used in constructional work, buildings, steel structure, wall structure, reinforced concrete road, retaining wall, protection slope, floor, floor boards, successive wall, tunnels, fence, etc.
Specifications:
Model Wire Diameter Mesh Opening Width Welding Speed Power
JWM-1 1.3-2.5mm 50*50-200*200mm 36’’ 48’’ 45times/minute 380V. 50HZ 3phase.
JWM-2 1.8-3.5MM 50*50-200*200mm 36’’ 48’’ 60’’ 45times/minute 380V. 50HZ 3phase.
JWM-3 3-4.5mm 50*50-200*200mm 72’’ 84’’ 30times/minute 380V. 50HZ 3phase
|
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
supply excavator SC220.7 |
|
|
We Shandong Changlin group is one of the biggest corporation of construction machinery in china. The product we would provide including Excavator SC220.7; Wheel Loader CL750A, ZL30F-1 , ZL 50G, CL750A, ZL30F-1; Road Roller RH126, RM206, RD120, RS126, RT1215, and RP260.
"High quality, good service, low price" is our logo.
We are a rapidly growing company. Having obtained the ISO9001 certificate, we has a provincial technical development center and 4 research institutes. With production and marketing net systems using CAD computer system, our company can produce 2,000 road rollers, 2,000 wheel loaders every year.
We provide high quality products with low price. Welcome to visit our website: www.changlingroup.com for more information of our company.
|
|
| » Posted by: Shandong Changlin Group [China] |
|
|
|
|
|
[Sell]
Used Oil Regeneration/oil restoration/oil recycling System(NSH GER ) |
|
|
(oil purifier,oil treatment,oil filtration,oil purification,oil recycling,oil reclamation, oil regeneration,oil restoration,oil filtering,oil filter,oil purifying,oil disposal,oil recovery,waste management,oil reconditioned,oil reconstituted,oil restituting,oil recuperation,oil resumingoil recuperation)
Ⅰ. Application
NSH GER gas engine oil System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Ⅱ. Edges of GER
 Design according to different customers’ needs.
 Purify blend oils.
 Low operation cost.
 Low maintenance and replacement expenses.
 High regeneration rate.
 Automatic reverse wash system will extend the lifetime of filters and improve the performance of the filters.
 High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
 Small size, light weight, low noise.
|
|
| » Posted by: SINO-NSH Oil Purifier&Oil Treatment Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
Lubrication Oil Purifier,oil treatment,oil purifying machine(SINO-NSH LV) |
|
|
(oil purifier,oil treatment,oil filtration,oil purification,oil recycling,oil reclamation, oil regeneration,oil restoration,oil filtering,oil filter,oil purifying,oil disposal,oil recovery,waste management,oil reconditioned,oil reconstituted,oil restituting,oil recuperation,oil resuming oil recuperation)
Application
LV series oil purifier are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.
Features
 Perfect capacity of removing impurities. The special filters made by NSH are made of special materials which can eliminate various impurities, water and gas effectively and rapidly.
 Automatic reverse wash system will extend the lifetime of filters and improve the performance of the filters.
 High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
 Online work
 Easy handling and maintenance.
 Lower maintenance and replacement expenses
 High efficiency and effectiveness ,
 Small size, light weight, low noise
 Available in mobile or stationary options.
 Various sizes and configurations (shield) available
|
|
| » Posted by: SINO-NSH Oil Purifier&Oil Treatment Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
Turbine Oil Purifier/oil restoration/oil filtration(Sell SINO-NSH TF ) |
|
|
(oil purifier,oil treatment,oil filtration,oil purification,oil recycling,oil reclamation, oil regeneration,oil restoration,oil filtering,oil filter,oil purifying,oil disposal,oil recovery,waste management,oil reconditioned,oil reconstituted,oil restituting,oil recuperation,oil resumingoil recuperation )
Application
TF series is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid.
It can eliminate them effectively and efficiently. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition.
Description
TF turbine oil purifier series is developed by vacuum evaporation technology, coacervation technology, coalescing technology, separating engineering technology and refined purification technology. It can eliminate water, gas, impurities, colloid, dielectric etc. rapidly and effectively in high vacuum situation and make the waste oil reuse.
The lubrication of turbine or other equipments which has lubrication system need be replaced frequently because of vapor, water and other impurities mixed with it. Otherwise, oil deterioration would result in breakdown of machinery or affect the normal running of machinery.
TF series can effectively extend the lifetime of oil and protect turbine and other machinery which has lubrication system from damage.
|
|
| » Posted by: SINO-NSH Oil Purifier&Oil Treatment Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
Insulation oil purifier,oil treatment plant(SINO-NSH VFD) |
|
|
(oil purifier,oil treatment,oil filtration,oil purification,oil recycling,oil reclamation, oil regeneration,oil restoration,oil filtering,oil filter,oil purifying,oil disposal,oil recovery,waste management,oil reconditioned,oil reconstituted,oil restituting,oil recuperation,oil resumingoil recuperation)
Application
VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Description
Model VFD series utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. Comparing to Model VF series, it add ROOTS vacuum system, second stage of separating system to improve the effect of purification. To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly.
Product Catalogue
Insulation Oil Series,
VFD Double-Stage High-Efficiency Vacuum Insulation Oil Purifier,
VFD-A Double-Stage Vacuum Insulation Oil Automation Purifier ,
VFD-R Double-Stage Vacuum Insulation Oil Regeneration Purifier,
VFD-T Double-Stage Vacuum Insulation Oil Purifier with Tester,
Turbine Oil series
TF Turbine Oil Purifier ,
TF-A Turbine Oil Automation Purifier,
TF-R Turbine Oil Regeneration Purifier ,
Lubrication Oil series
LV Lubrication Oil Purifier,
LV-A Lubrication Oil Automation Purifier ,
Gas Engine Oil Regeneration System ,
|
|
| » Posted by: SINO-NSH Oil Purifier&Oil Treatment Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sino-nsh Vfd Transformer Oil Recovery |
|
|
VFD insulating oil purifying series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD oil purifying series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Description
Model VFD series utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. Comparing to Model VF series, it add ROOTS vacuum system, second stage of separating system to improve the effect of purification. To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly.
Insulation Oil Series
VFD Double-Stage High-Efficiency Vacuum Insulation Oil Recycling plant
VFD-A Double-Stage Vacuum Insulation Oil Automation Recycling plant
VFD-R Double-Stage Vacuum Insulation Oil Regeneration Recycling plant
VFD-T Double-Stage Vacuum Insulation Oil Recycling plant with Tester
GER Gas Engine(motor) Oil Regeneration(recycling) System
Turbine Oil series
TF Turbine Oil Recycling plant
TF-A Turbine Oil Automation Recycling plant
TF-R Turbine Oil Regeneration Recycling plant
Lubrication Oil series
LV Lubrication Oil Recycling plant
LV-A Lubrication Oil Automation Recycling plant
LV-R Lubrication Oil Regeneration recycling plant
EV-A Explosion-proof Vacuum Recycling plant
EP Explosion-proof Precision Recycling plant
EP-A Explosion-proof Precision Recycling plant
sinonsh22@163.com
http://oilpurifier.ec51.com
|
|
| » Posted by: Sino-nsh Oil Recycling System manufacture co.,ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
|
