|
|
|
|
|
|
|
[Sell]
wedge wire filter tube screen |
 |
|
China sell Continuous slot pre-packed rod based screen
Contact: Ms Joanna
Info02@wedgewires.com haixing.21@hotmail.com
Dear Sir or Madam:
We are aixing wedge wire filter factory .my msn: Haixing.21 @hotmail.com
Weaving and characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire ,triangular wire or trapezoid wire.The warp is triangular wire(V-shaped wire). Water well screens have a structure and high open area,as well as accurate slot dimension. In the same time , water well screen have heat-resisting, anti-corrosive, good machine capability,long life span,safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Styles of connection:by welding or by threaded male/female couplin. Standard length:3m/5.85m
Materials - stainless steel 304, 316, 904, hastelloy C276, Inconel 600 and 800 series, titanium T40, Duplex and Superduplex alloys etc. |
|
» Posted by: haixing wedge wire screen factory [China]  |
|
|
|
|
|
[Sell]
China haixing manufacture the seive bend screen |
|
|
Seive bend screen ,side hill screen ,curved screen ,
Contact： Ms Joanna
Info02@wedgewires.com
Detailed offer Description
Sieve Bend Screens are mainly used for liquid/solid seperation and manufactured to suit a wide range of industries such as Sugar, Coal Mining & Quarrying, Mineral Processing, Cement, and Industrial & Urban Effluent Treatment etc. Sieve bend screens are also used as a pre-filter in urban & industrial waste treatment plants to improve the performance of the clarifier by drastically reducing the load.
Features:
Energy Efficient - operates with no moving parts and with no energy input.
Space Efficient - treats up to 122 litres per second per square metre of floor space.
Quiet Operation - no moving parts means no mechanical or electrical vibrations.
Accurate Sizing - can be used for sizing solid particles down to 0.2 mm (0.008").
Low Maintenance - the profile wire screen resists clogging by near-size particles, and the all-stainless steel construction ensures a long, corrosion-free installation.
Easy Screen Replacement - a typical screen can be replaced in 10 minutes with no tools.
Flexible Design - we can supply units with any features you may require.
|
|
| » Posted by: haixing wedge wire screen factory [China] |
|
|
|
|
|
[Sell]
China haixing manufacture the flat panel screen |
|
|
flat panel screen ,welded V-wire flat panel screen
Contact：Ms Joanna
Info02@wedgewires.com
This is Joanna from haixing wedge wire screen factory in china.
Haixing All Welded V Wire Flat Screens are used for wide range of applications such as sizing, classification and dewatering.
These are used for coal & iron ore beneficiations when fitted on the vibratory machine.
There are three basic reasons why our stainless steel screen panels are so widely used in mineral processing vibrators .Effective sizing or classifying requires uniform slots in the screen.
The screen panels in flat deck applications are made with rectangular support bars which enables the panel to span longer distances without intermediate support bars.
Welding each surface wire at every junction with support rods creates a rigid structure that transmits vibratory forces more effectively with less energy loss.
Haixing screen panels are manufactured with an edge finish and variety of framing methods to suit your various needs.
Please tell us your demand and then we design ,manufacture for you.
|
|
| » Posted by: haixing wedge wire screen factory [China] |
|
|
|
|
|
[Sell]
candle filter for automatic backwsh filter |
|
|
China sell wedge wire Candle filter
Contact： Ms Joanna
Email： info02@wedgewires.com haixing.21@hotmail.com
Candle Filter is a cylindrical, vertical pressure vessel containing many filter elements. The candle filters are made from a variety of ceramic materials using either ceramic granules or fibers. These filters consist of several large, unglazed porcelain tubes closed at one end and placed in a closed metal chamber. Candle filters are hollow,porous ceramic cartridges. Candle filters are also used for thickening to produce concentrated flow able slurry by partial removal of the liquid phase as filtrate. Candle filters are very well suited for handling flammable, toxic and corrosive materials since they are autoclaved and designed for hazardous environments when high pressure & safe operation are required. The candle filter consists of three major components such as vessel, filtering elements and cake discharge mechanism.
|
|
| » Posted by: haixing wedge wire screen factory [China] |
|
|
|
|
|
[Sell]
China Externally would drum screen |
|
|
Contact：Ms Joanna
Info02@wedgewires.com
PRINCIPLE
A collector and distributor is an assembly utilising a header pipe or a hub to which several filtering tubes are attached to enable collection or distribution of a gas or liquid, within a media. The purpose is to eliminate dead zones, wall effects or channelling in order to maximise efficiency.
DESIGN
Assembly - The purpose of the top or bottom, distributor and collector assembly is to collect or distribute a uniform flow within the media or for intermediate collection or distribution in mixed-bed processes. Attention must be applied to the need for backwashing or regeneration. Designs include a hub with spokes or parallel laterals.
Laterals - The smallest diameter is 21 mm and the finest slot is 30 microns. Each lateral consists of either a single wedgewire screen or screen jacket with an internal perforated pipe to control distribution and to add to mechanical strength where required.
Materials - stainless steel 304, 316, 904, hastelloy C276, Inconel 600 and 800 series, titanium T40, Duplex and Superduplex alloys etc.
|
|
| » Posted by: haixing wedge wire screen factory [China] |
|
|
|
|
|
[Sell]
CK5112E CNC Single-Column Vertical Lathe |
|
|
CK5112E CNC Vertical Lathe
This kind of vertical lathe has a high cost performance,excellent quality and reasonable price.
The lathe use hanging button station,both the electric box and the lathe bed were designed integrated,and also adopt quench crossbeam,quench T type ram(can select square ram) with guide rail model pasted.
The lathe was equipped with level 16 mechanical speed changing,pentagon knife table or square knife table,uses Simens 802C system(can equipped other selected system).The lathe's crossbeam is defended closed,each lubrication part can lubrication automatic.
Both the lathes design and manufacture are strictly according to JB/T9934.1-1999 CNC vertical lathe accuracy test standard and JB/T9934.2-1999 CNC vertical lathe technical conditions.
Optional functions for this kind of vertical lathe: Frequency stepless speed governing ,electrical knife table,higher lathe bed,etc.
One year quality guaranteed, completed after sales service. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
C5112E Single Column Vertical Lathe |
|
|
C5112E Single Column Vertical Lathe Machine
This vertical lathe has excellent quality,which can be No.1 in China.
Both the crossbeam guide rail and ram guide rail are processed by the super
audio quench（HRC≥50), the sliding surface of guide rail is processed by model sticked(including oblique iron surface and plate surface ),the product's accuracy can stay for a long time,at least may extend the huge mend cycle to up 10 years
All the casting used on the lathe is HT300,with manual heat timeliness processed.All the casting will never do any lose weight processings,the whole body's weight is match up to the standard weight.
The pentagon knife table adopts high accuracy mouth-tooth plate to positioned.Each of the 120 parts positioned separately,greatly strengthened rigidity.
The lathe is standard equipped with 4 axis digital displayed,electricity uses Japan Omron PLC controlled,all the electric parts are uses super high quality components,standard(CE standard) wiring craft,so the whole machine's electricity has high reliability.Electronic valve,16 level mechanical speed changing,convenient,flexible and reliable.High accuracy grinding gears and grinding spiral umbrella（level 6 accuracy),low noise and translation motion.
Both the lathes design and manufacture are strictly according to JB/T4116-96 vertical lathe accuracy test standard and JB/3665-96 vertical lathe technical conditions.
For completed accessories configuration,the users can go into production when only well prepared knife tools and measure tools.Completed after sales service(before sales,in sales,after sales,installation,debugging,training and repair guaranteed),one year quality guaranteed.
Optional configurations:rolling worktable,Germany Mecano button station,higher lathe bed,lengthen ram,square ram,etc. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
C5116E Single Column Vertical Lathe |
|
|
C5116E Single Column Vertical Lathe Machine
This vertical lathe has excellent quality,which can be No.1 in China.
Both the crossbeam guide rail and ram guide rail are processed by the super audio quench（HRC≥50), the sliding surface of guide rail is processed by model sticked(including oblique iron surface and plate surface ),the product's accuracy can stay for a long time,at least may extend the huge mend cycle to up 10 years
All the casting used on the lathe is HT300,with manual heat timeliness processed.All the casting will never do any lose weight processings,the whole body's weight is match up to the standard weight.
The pentagon knife table adopts high accuracy mouth-tooth plate to positioned.Each of the 120 parts positioned separately,greatly strengthened rigidity.
The lathe is standard equipped with 4 axis digital displayed,electricity uses Japan Omron PLC controlled,all the electric parts are uses super high quality components,standard(CE standard) wiring craft,so the whole machine's electricity has high reliability.Electronic valve,16 level mechanical speed changing,convenient,flexible and reliable.High accuracy grinding gears and grinding spiral umbrella（level 6 accuracy),low noise and translation motion.
Both the lathes design and manufacture are strictly according to JB/T4116-96 vertical lathe accuracy test standard and JB/3665-96 vertical lathe technical conditions.
For completed accessories configuration,the users can go into production when only well prepared knife tools and measure tools.Completed after sales service(before sales,in sales,after sales,installation,debugging,training and repair guaranteed),one year quality guaranteed.
Optional configurations:rolling worktable,Germany Mecano button
station,higher lathe bed,lengthen ram,square ram,etc.
|
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
C5235E Double-column Vertical Lathe |
|
|
C5235E Double column Vertical Lathe Machine
The double column vertical lathe machine uses modularize design ,general used products, mature , stable and reliable.
The lathes' high quality castings (HT300) has a heat timeliness processing .The guide rail surface of crossbeam has a super audio quench processing,the vertical tool use ductile iron material,the sliding surface use model pasting processed,lasting and durable.The handed lubrication pump realize that each lubrication part can lubricate by inject oils.High quality and famous electricity parts and Japan Omron PLC controlled,with high reliability.
The guide rail of vertical lathe has two kinds,one is moving-static pressure,the other is static pressure,the moving pressure kind can bear10tons,the static pressure kind can bear 16-20tons.Independent hydraulic station,convenient for adjust,repair and maintenance.Standard equipped with raster digital displayed configuration.
Both the lathes design and manufacture are strictly according to JB/T4116-96 vertical lathe accuracy test standard and JB/3665-96 vertical lathe technical conditions.
Completed processing and configuration crafts,strict quality controlled process to make sure a perfect product with super high quality.
The vertical lathe has high accuracy transmission case gears(level 6 accuracy)and high accuracy grinding spiral umbrella gears(level 6 accuracy),low noise,and smooth operation.
One year quality guaranteed service(installation ,debug and after-sales service). |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
CK5116E CNC Single-Column Vertical Lathe |
|
|
CK5116E CNC Vertical Lathes
This kind of vertical lathe has a high cost performance,excellent quality and reasonable price.
The lathe use hanging button station,both the electric box and the lathe bed were designed integrated,and also adopt quench crossbeam,quench T type ram(can select square ram) with guide rail model pasted.
The lathe was equipped with level 16 mechanical speed changing,pentagon knife table or square knife table,uses Simens 802C system(can equipped other selected system).The lathe's crossbeam is defended closed,each lubrication part can lubrication automatic.
Both the lathes design and manufacture are strictly according to JB/T9934.1-1999 CNC vertical lathe accuracy test standard and JB/T9934.2-1999 CNC vertical lathe technical conditions.
Optional functions for this kind of vertical lathe: Frequency stepless speed governing ,electrical knife table,higher lathe bed,etc.
One year quality guaranteed, completed after sales service. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
CK5112Epro Single-Column CNC vertical lathe |
|
|
CK5112Epro CNC vertical lathe
This kind of CNC vertical lathes is a professional type,mature production technology, reliable and stable quality,so it owns huge amounts of users.
It has two kinds for you choose from,square ram type and four labour electrical knife table type,has features like big torque,high rigidity,and heavy cutting,etc.
The lathes worktable is waterproof so we don't need to afraid of the cutting liquid may infiltrate to the worktable.Use Simens 802DSL system(customers can appoint other kind system ),besides,both the servo motor and servo driver use Simens products.
The slideway surface of crossbeam on lathes is processed by super audio quench(> HRC50),durable and stable;The square ram uses ductile cast iron material(QT 600),and the sliding surface uses model pasting soft tape processed,so that the big repair cycle can be at least extended to ten years later.
The independent electrical ark equipped with air-condition to refrigeration,which has greatly extended the service life for the electricity components,convenient for maintenance,and will not be influenced by machine shake.The machine is configured with Nanjing crafts or Taiwan Shangyin P3 level high accuracy ball screw(P1 for highest and P6 for lowest),and use imported screw bearing as support.
The lathes crossbeam adopts white steel as defended,each lubrication part of Lathes uses automatic lubrication pump to supply oils automaticlly.
Four-speed gear shift and motor infinitely variable speeds, wide range for constant power and big torque.
Both the lathes design and manufacture are strictly according to JB/T9934.1-1999 CNC vertical lathe accuracy test standard and JB/T9934.2-1999 CNC vertical lathe technical conditions.
This kind of lathes own constant linear speed turning and lathe thread features.
High accuracy transmission case gears(6 level)and high accuracy spiral umbrella gears(6 level),their noise is low and rotary accuracy is high.
All the castings use HT300 gray cast iron(ram is ball iron)which with a manual heat timeliness procedures,high quality processing and completed configuration crafts.All the functional parts and electricity components are valuable goods,high reliability.
Completed accessories configuration
For completed accessories configuration,the users can go into production when only well prepared knife tools and measure tools.Completed sales service(before sales,in sales,after sales,installation
debugging,training and repair guaranteed),two year quality warranted.
Optional accessories:Germany Mecano button station,constant current static pressure slideway,Oil temperature refrigerator,constant temperature chiller,grating closed-loop,higher lathe bed,lengthen ram,semi-closed protected,chip cleaner,water pump, etc. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
CKG125 High-speed CNC Single Column Vertical Lathe |
|
|
CKG125 CNC High speed Vertical Turning lathe
This series of vertical lathe is suitable for hard alloy and ceramics etc knife tools,they can do mechanical processing such as rough,semi-refine and finishing machining to inside and outside cylindrical faces,inside and outside circular conical faces,hollow and different kinds of curve faces,and notch cutting.
There are totally three models for this kind of lathe:high-speed type,standard type, heavy load type for you to choose from.
High speed cutting,the highest cutting speed can be 2000m/min.when the knife rest quickly running,the speed can be 12m/min.
The main transmit use main spindle servo motor to drive,two-speed gear shift use imported ZF gear box,high speed rotating,static and dynamic balance,use high accuracy transmit gears,grinding crafts,realizing high transmission efficiency, stably operation with low noise and high speed.
The feeding system is driven by alternate servo motor, and the motor and ball screw connected by flexible coupling,realizing none transmission interval,and the operation accuracy is high.
The vertical column is hot symmetrical structure,and is installed at the bottom of worktable,by using of finite element canculation to take effective isolation measures,high rigidity and high anti-vibration capabilities.
The worktable is hot symmetrical structure, the main axis use double column cylindrical roller bearing with high accuracy and adjustable diameter radial interval to centering,the axial direction use large-scale thrust ball bearing as rolling slideway,and also equipped with oil cooling device,so the worktable own features like high rotary accuracy,huge load ability and small thermal deformation.
Feed motion of ram and knife set use straight line double direction rolled to make the knife rest have a smooth movement,high transmission efficiency,good accuracy maintained.
The CNC system use Simens or Fanuc system,also customers pointed others.
The lathe can be configured with chip cleaner and semi-closed protection cover.
According to the users' requirements,we can offer tool carrier,tool setting device in the machine,milling and boring function,worktable indexing and feeding function,grinding function,left vertical knife rest and full-closed loop controlled.
All the electrical parts,hydraulic parts and functional parts use international famous brand. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
CK5235E CNC Double Column Vertical Lathe |
|
|
CK5235E CNC Double Column Vertical Lathe China
The CNC double column vertical lathes uses the most advanced lathe producing technology,modularized designed,finite-element analysis,together machine,electricity,hydraulic in one set, to reflect high accuracy precision cutting.
Lathes adopts Simens 802DSL or 802C CNC system.CNC at the same time,it has 100% full manually exchange operation function.,though common operator can also don't need programme,manually operation,convenient and practical.Second gears mechanical speed changing plus huge torque DC electrical motor stepless speed governing,to reflect constant linear speed turning.
The lathes use high quality castings(HT300)which after a heat timeliness processing.The above guide rail on the crossbeam is crustificated with chrome, wolfram,and manganese plate.
The left tool carrier is a normal one,and the right is CNC controlled,and can be both CNC controlled.The guide rail of worktable uses imported constant current motor to supply oils constantly,stable accuracy;The hydraulic oil uses refrigerator to refrigerate at a stable temperature,and lower the worktable deformation.
Each lubrication part of Lathes uses automatic lubrication pump to supply oils automaticlly.High accuracy ball screw,uses imported bearings(Germany INA)to support.
Both the lathes design and manufacture are strictly according to JB/T9934.1-1999 CNC vertical lathe accuracy test standard and JB/T9934.2-1999 CNC vertical lathe technical conditions.
Our company has a completed service system(before sales,in sales,after sales,installation,
debugging,training and repair guaranteed),two year warranty service.
The lathes use a large amount of functional parts(electrical parts,servo motor,servo driver,hydraulic parts,bearings,screw,planetary reducer,etc.),reliable quality warranted.The transmission case adopts high accuracy grinding gears.
Lathes standard configuration with white steel crossbeam as defended,and walking board also. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
CXK125 CNC vertical turning and milling center |
|
|
CXK125 CNC vertical turning center
1 CXK series CNC vertical turning and milling center is a kind of machine that independent development by our own company,is a kind of various functions,high accuracy and high efficiency ,new and composite machining lathe.This kind of machine has been widely used in many areas like industry,aerospace, shipbuilding,nuclear and fast speed railway for its advanced crafts,high efficiency producing, precision processing and various uses.
2 CXK series CNC vertical turning and milling center not only has functions as normal lathes,can finish all processes except bottom by only one time clamping, including
boring,drilling,reaming and tapping,when configured with Double pendulum milling head,this machine can process more complex workpieces like lamina,etc various kinds of complex curved surface.It has X,Z,C three CNC axis.
3 The main basic parts of lathes and main transmission use hot symmetric structures,has high hot reliability.
4 Main axis radial of worktable use high accuracy double column cylindrical roller bearing to centering,axial direction use large scale thrust ball bearing to load.The workpiece has precision indexing and milling feeding functions.
5 Crossbeam has the grading positioning function.6 The ram uses high accuracy ball screw to transmit,the lathe is configured with automatic milling tool storeroom,you can select any one from 12-20 station.
7 Use Simens 802DSL system(customers can appoint other kind system ),besides,both the servo motor and servo driver use Simens products.
8 All the castings use HT300 gray cast iron(ram is ball iron)which with a manual heat timeliness procedures,high quality processing and completed configuration crafts.All the electricity components,bearings,key parts,hydraulic parts are selected from international famous manufactures.
9 For the completed accessories configuration,the users can quickly go into production when only prepared the knife tools and measure tools.Completed sales service,two year quality warranty. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
C5120E Single Column Vertical Lathe |
|
|
C5120E Single Column Vertical Lathe Machine
This kind of vertical lathe has a high cost performance,excellent quality and reasonable price.
The VTL machine use hanging button station,both the electric box and the lathe bed were designed integrated,and also adopt quench crossbeam,quench T type ram(can select square ram) with guide rail model pasted.
The lathe was equipped with level 16 mechanical speed changing,pentagon knife table or square knife table,uses Simens 802C system(can equipped other selected system).The lathe's crossbeam is defended closed,each lubrication part can lubrication automatic.
Both the VTL machine design and manufacture are strictly according to JB/T9934.1-1999 CNC vertical lathe accuracy test standard and JB/T9934.2-1999 CNC vertical lathe technical conditions.
Optional functions for this kind of vertical lathe: Frequency stepless speed governing ,electrical knife table,higher lathe bed,etc.
One year quality guaranteed, completed after sales service. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
C5123E Single Column Vertical Lathe |
|
|
C5123E Single Column Vertical Lathes
This vertical lathes has excellent quality,which can be No.1 in China.
Both the crossbeam guide rail and ram guide rail are processed by the super audio quench（HRC≥50), the sliding surface of guide rail is processed by model sticked(including oblique iron surface and plate surface ),the product's accuracy can stay for a long time,at least may extend the huge mend cycle to up 10 years
All the casting used on the lathe is HT300,with manual heat timeliness processed.All the casting will never do any lose weight processings,the whole body's weight is match up to the standard weight.
The pentagon knife table adopts high accuracy mouth-tooth plate to positioned.Each of the 120 parts positioned separately,greatly strengthened rigidity.
The VTL machine is standard equipped with 4 axis digital displayed,electricity uses Japan Omron PLC controlled,all the electric parts are uses super high quality components,standard(CE standard) wiring craft,so the whole machine's electricity has high reliability.Electronic valve,16 level mechanical speed changing,convenient,flexible and reliable.High accuracy grinding gears and grinding spiral umbrella（level 6 accuracy),low noise and translation motion.
Both the lathes design and manufacture are strictly according to JB/T4116-96 vertical lathe accuracy test standard and JB/3665-96 vertical lathe technical conditions.
For completed accessories configuration,the users can go into production when only well prepared knife tools and measure tools.Completed after sales service(before sales,in sales,after sales,installation,debugging,training and repair guaranteed),one year quality guaranteed.
Optional configurations:rolling worktable,Germany Mecano button station,higher lathe bed,lengthen ram,square ram,etc. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
C5126E Single Column Vertical Lathe |
|
|
C5126E Single Column Vertical Lathe China
This vertical lathe has excellent quality,which can be No.1 in China.
Both the crossbeam guide rail and ram guide rail are processed by the super audio quench（HRC≥50), the sliding surface of guide rail is processed by model sticked(including oblique iron surface and plate surface ),the product's accuracy can stay for a long time,at least may extend the huge mend cycle to up 10 years
All the casting used on the lathe is HT300,with manual heat timeliness processed.All the casting will never do any lose weight processings,the whole body's weight is match up to the standard weight.
The pentagon knife table adopts high accuracy mouth-tooth plate to positioned.Each of the 120 parts positioned separately,greatly strengthened rigidity.
The lathe is standard equipped with 4 axis digital displayed,electricity uses Japan Omron PLC controlled,all the electric parts are uses super high quality components,standard(CE standard) wiring craft,so the whole machine's electricity has high reliability.Electronic valve,16 level mechanical speed changing,convenient,flexible and reliable.High accuracy grinding gears and grinding spiral umbrella（level 6 accuracy),low noise and translation motion.
Both the lathes design and manufacture are strictly according to JB/T4116-96 vertical lathe accuracy test standard and JB/3665-96 vertical lathe technical conditions.
For completed accessories configuration,the users can go into production when only well prepared knife tools and measure tools.Completed after sales service(before sales,in sales,after sales,installation,debugging,training and repair guaranteed),one year quality guaranteed.
Optional configurations:rolling worktable,Germany Mecano button station,higher lathe bed,lengthen ram,square ram,etc. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
C5231E Double-column Vertical Lathe |
|
|
C5231E Double Column Vertical Lathes China
The double column vertical lathe uses modularize design ,general used products, mature , stable and reliable.
The lathes' high quality castings (HT300) has a heat timeliness processing .The guide rail surface of crossbeam has a super audio quench processing,the vertical tool use ductile iron material,the sliding surface use model pasting processed,lasting and durable.The handed lubrication pump realize that each lubrication part can lubricate by inject oils.High quality and famous electricity parts and Japan Omron PLC controlled,with high reliability.
The guide rail of vertical lathe has two kinds,one is moving-static pressure,the other is static pressure,the moving pressure kind can bear10tons,the static pressure kind can bear 16-20tons.Independent hydraulic station,convenient for adjust,repair and maintenance.Standard equipped with raster digital displayed configuration.
Both the lathes design and manufacture are strictly according to JB/T4116-96 vertical lathe accuracy test standard and JB/3665-96 vertical lathe technical conditions.
Completed processing and configuration crafts,strict quality controlled process to make sure a perfect product with super high quality.
The vertical lathe has high accuracy transmission case gears(level 6 accuracy)and high accuracy grinding spiral umbrella gears(level 6 accuracy),low noise,and smooth operation.
One year quality guaranteed service(installation ,debug and after-sales service). |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
CK5126E CNC Single-Column Vertical Lathe |
|
|
CK5126E CNC Single Column Vertical Lathe
This kind of vertical lathe has a high cost performance,excellent quality and reasonable price.
The lathe use hanging button station,both the electric box and the lathe bed were designed integrated,and also adopt quench crossbeam,quench T type ram(can select square ram) with guide rail model pasted.
The lathe was equipped with level 16 mechanical speed changing,pentagon knife table or square knife table,uses Simens 802C system(can equipped other selected system).The lathe's crossbeam is defended closed,each lubrication part can lubrication automatic.
Both the lathes design and manufacture are strictly according to JB/T9934.1-1999 CNC vertical lathe accuracy test standard and JB/T9934.2-1999 CNC vertical lathe technical conditions.
Optional functions for this kind of vertical lathe: Frequency stepless speed governing ,electrical knife table,higher lathe bed,etc.
One year quality guaranteed, completed after sales service. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
[Sell]
CK5123E CNC Single-Column Vertical Lathe |
|
|
CK5123E CNC Single Column Vertical Lathes
This kind of vertical lathe has a high cost performance,excellent quality and reasonable price.
The lathe use hanging button station,both the electric box and the lathe bed were designed integrated,and also adopt quench crossbeam,quench T type ram(can select square ram) with guide rail model pasted.
The lathe was equipped with level 16 mechanical speed changing,pentagon knife table or square knife table,uses Simens 802C system(can equipped other selected system).The lathe's crossbeam is defended closed,each lubrication part can lubrication automatic.
Both the lathes design and manufacture are strictly according to JB/T9934.1-1999 CNC vertical lathe accuracy test standard and JB/T9934.2-1999 CNC vertical lathe technical conditions.
Optional functions for this kind of vertical lathe: Frequency stepless speed governing ,electrical knife table,higher lathe bed,etc.
One year quality guaranteed, completed after sales service. |
|
| » Posted by: Dalian Zhenghe International Trade Co. Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
|
