|
|
|
|
|
|
|
[Sell]
Waste Tire Sidewall Cutter,Waste Tire Decomposition Machine,Rubber Recycling Machine |
 |
|
Waste Tire Sidewall Cutter,Waste Tire Decomposition Machine(Xincheng,China)
Waste Tire Depose Machine
Tire sidewall cutting machine is used for tire sidewall side of the cut to the next step of segmentation.Circular platform placed on the tire,rotate the middle of the hand wheel,jaw card holder will be jammed solid inner tire,start the power,rotate the work platform,cutting tools ad needed into the knife,slowly cut into the tires,step by step.Until the cut side of the tire. candy@sinorubbermach.com Skype: rubber.machine
Type QQJ-20
Processing Range of tyres(mm) 700-1200mm
Processing Amount(pcs/h) 23-30
Rotate Speed(r/min) 46.8
Motor Power(kw) 5.5
Power Supply 380V 50HZ 3PH
Overall Dimension(mm) (L×W×H) 1100×900×1700
Weight(T) approx 0.4 |
|
» Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China]  |
|
|
|
|
|
[Sell]
Rubber Floor Tiles Machine,Rubber Tiles Molding Press Machine,Rubber Machine Manufacturer |
|
|
Rubber Tiles Floor Making Line,Rubber Floor Tiles Press,Rubber Hydraulic Press
Rubber tiles is a kind of recycled rubber as a raw material,a new type of surface decoration materials though a high temperature and appropriate pressure . Rubber tiles are colored by the post-treated rubber particles coated with adhesive mixture, and then pressed. Mainly used for outdoor, can also be used indoors. Rubber tiles made of two different densities of material composition, colorful surface with fine powder or small plastic colored wire and through a special process, while the lower coarse powder or pellets, made of plastic wire.This rubber tile machine is specially used to produce rubber tiles. Each layer is matched with two sets of moulds , so it can be vulcanized batch by batch for better efficiency. |
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Rubber Refining Mill,Rubber Refiner,Rubber Mixing Mill,Rubber Machine |
|
|
Rubber Refining Mill,Rubber Refiner,Rubber Mixing Mill,Rubber Machine Made In China
Rubber refining mill:The waist drum type roller is mainly used for stripping away impurity substance of reclaimed rubber.
Refining machine is equipped with double adhesive device, to replace artificial turn glue, packaging, reduce labor intensity.
This machine adopts Korean technology, has reached the advanced domestic level. And the hydraulic pressure plate, block can be adjusted freely adjust the cylinder block glue board in the axial distance.
Mainframe applications, chain transmission structure compact, high strength, low noise characteristics. |
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Bale Rubber Cutting Machine,Rubber Cutting Machine Made In China |
|
|
Vertical Rubber Cutting Machine,Rubber Cutter,Rubber Cutting Machine
This vertical rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber. This vertical rubber cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder. |
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Rail Mold Open Hydraulic Molding Press Machine |
|
|
Product Name: Rail Mold Open Hydraulic Molding Press Machine
Features:
**This type of machine is suitable to be used for double mold plates. It is capable of high speed production.
**For the rail mold opening,the opening angle is up to 90 degree. It is very convenient to operate.
**Slow moving speed is available for alignment more safe and more accurate.
**High force employs dual pressure and each oil system is designed separately. It is consistent, quiet and low frequency of malfunctions. Two shafts can be operated simultaneous. |
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
4RT Front Top Mold Open Hydraulic Rubber Molding Press Machine |
|
|
Product Name: 4RT Front Top Mold Open Hydraulic Rubber Molding Press Machine
Features:
**The 4RT surpasses the traditional top opening mold that can be used for taking out the final product when there are triple or four mold plates with the design of opening mold, pushing out the mold in between, loading the bottom mold, lowering the mold in between, and rising thimble to move the final production. |
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
2RT Front Top Mold Open Rubber Injection Molding Press Machine |
|
|
Product Name: 2RT Front Top Mold Open Rubber Injection Molding Press Machine
Features:
** Mechanics design
All components are mounted on a single base.Great attention to surface finishing presents a
machine that is fine in appearance as well as dependable in production.
**Material supply system
A special design of two-stages material supply is employed. It expels bubble out of the raw
material in the most effective way and there is no dead material left in the injection system.
**Injection volume control
A design incorporating a high precision optical ruler, makes in Germany, is adopted. The
Injection volume can be calculated and controlled precisely.
**Design of rotary injection board
Special designs for loading/unloading functions are provided. It causes no dead material in the
Injection nozzle. It is easy to clean the material. It is durable and the quality is consistent.
**Safety design
Option of using the light curtain, made in Japan. An automatic warning system is available. It
monitors the status of machine in order to provide extra protection to assurs the operation
safety for operators.
**Hydraulic system design
A full-scale oil system is adopted. The noise is low and the pressure is adjusted automatically and proportionally. It is very accurate and stable.
|
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
4RT Front Top Mold Open Hydraulic Vacuum Rubber Molding Press Machine |
|
|
Product Name: 4RT Front Top Mold Open Hydraulic Vacuum Rubber Molding Press Machine
**The 4RT surpasses the traditional top opening mold that can be used for taking out the final
product when there are triple or four mold plates with the design of opening mold, pushing out
the mold in between, loading the bottom mold, lowering the mold in between, and rising hood
hit the final production. |
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
3RT Front Top Mold Open Hydraulic Vacuum Rubber Molding Press Machine |
|
|
Product Name: 3RT Front Top Mold Open Hydraulic Vacuum Rubber Molding Press Machine
Features:
**The 3RT surpasses the traditional top opening mold that can be used for the triple or four mold
plates with the design of opening mold and pushing out the mold in between.
**The opening mold can be adjusted by the software with separate opening, separate pushing out
The mold in between, continuous opening and continuous pushing out the mold in between. |
|
| » Posted by: Qingdao Xincheng Yiming Rubber Machienry Co.,Ltd [China] |
|
|
|
|
|
[Sell]
offer sinotruck howo trucks |
|
|
| 2.Sino Heavy Machinery Co,Ltd is the authorized company of SINOTRUK(CNHTC), and mainly deal with heavy duty trucks /all spare parts and service We supply HOWO, STEYR, STEYR KING, GOLDEN PRINCE, HOHAN series 4X2, 6X4, and 8X4 dump trucks, tractor trucks, cargo trucks, garbage trucks, oil tank trucks, water tank trucks, log trailers tractors, terminal tractors, etc. Our products arrange from 190 horse power to 410 horse power, and loading capacity cover from 5 tons to 50 tons. |
|
| » Posted by: sino heavy machinery co.,ltd [China] |
|
|
|
|
|
[Sell]
offer sinotruck howo trucks |
|
|
Our company is committed to design,sale,and serve on the road vehicles and machinery.
We can design and produce products according to your special requirements and also have good service to support you.we supply machine with good quality and very competitive price.
Hope to be a partner of your company. |
|
| » Posted by: sino heavy machinery co.,ltd [China] |
|
|
|
|
|
[Sell]
Addition cure silicone rubber for tire mold |
|
|
Place of Origin: Guangdong China (Mainland) Brand Name: Hong Ye Silicone Rubber
Min.Order Quantity: 200 Kilogram/Kilograms
Supply Ability: 8 Ton/Tons per Day
Port: shen zhen
Payment Terms: L/C,T/T,Western Union
Packaging Detail: 25kg/drum and 200kg/drum
Delivery Detail: within 3 days after payment confirmed in our bank.
Price: USD$10.88-12.47 /KG
Addition cure silicone rubber for tire mold making application:
Addition cure silicone rubber is primarily intended for tires making , and can be used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Addition cure silicone rubber for tire mold making description:
Addition cure silicone rubber is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high- temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Addition cure silicone rubber for tire mold making datasheet:
Product E620
Appearance Translucent
Hardness(shore A) 20±2
Mix ratio(A:B) 1:1/10:1
Viscocity Part A(mPa.s) 23000±2000
Viscocity Part B(mPa.s) 3500±500
Tensile strength (kgf/cm2) 45±5
Tear-strength (kN/m) 20±2
Elongation(%) 500±50
Pot life/working time (mins) 30-40
Curing time/setting time (hrs) 3-4hrs(25°C)
110-20mins(60°C)
Shrinkage rate (%) 0.1
Addition cure silicone rubber for tire mold making operation:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water)
on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Addition cure silicone rubber for tire mold making package:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
please feel free to contact Ms kaka:
Tel:86-755-89212365
Mob/Whatsapp:86-18938867528
E-mail: hykat)resinpu(dot)com
Skype:hykat)resinpu(dot)com
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. [China] |
|
|
|
|
|
[Sell]
Metal Crusher Manufacturer/Scrap Metal Crusher Price |
|
|
Metal crusher is the size of the device according to the manufacturer for its name, and it means a small metal crusher, because with can crusher to crush large materials such as bicycles and scrap, little breaks against a smash them on use than can crusher and then a big model, the production of large models certainly big, full-pulverized material, because the device either motor or bearing the hammer and so it must be reasonable structural design of the structure, then so with many names, such as bicycles crusher, old electrical appliances as well as in a large scrap crusher.
Scrap Metal Crusher Price/Metal Crusher Manufacturer newly developed can be divided into dry system, wet system and semi-wet system according to the working conditions of crusher. The function of dry system is that crushed materials need to through the air maneuver sorting system and separate the metal and non-metal. Another,the whole system is equipped with precipitator. The features of wet system is that when breaking, water spraying,while sorting, tricking cleaning simultaneously. Another, the characteristics of semi-wet system is that spraying a small amount in the need of crushing to prevent dust and no cleaning.
As for the processing of scrap metal and aluminum products,most manufacturers have chosen can crusher equipment. Metal can crusher can finely crush the scrap metal into particles fineness according to the requirements of customers until to metal pellets. After crushing,the materials is fine and even, which make the metal materials not produce smoke and flavor at the time of casting steel, and the high cost of refined steel.
Henan Fote Heavy Machinery Co., Ltd. has formed a complete production-chain that takes crushers and ball mills as the main products and vibrating screen, vibrating feeder, metal crusher, etc. as supplementary products. The major products are jaw crusher, impact crusher, hammer crusher, metal crusher, double roll crusher, sand making machine, vibrating screen, vibrating feeder, sand washing machine, ball mill, rotary dryer, etc. Equipments have been widely used in metallurgy, mining, chemicals, building materials, coal, refractories, ceramics and other industries. Welcome to visit and purchase.
Contact Information
Email: info@sinoftm.com
Website: www.foteinfo.com/metal-crusher-78.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
|
|
| » Posted by: Henan Fote Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Sand Washer Machinery/Ore Sand Washer |
|
|
Henan Fote Heavy Machinery Co., Ltd. is a professional mining machinery manufacturer in China. In order to promote the competitive strength, the advanced technologies have been introduced from America, Germany, Japan and Australia, which established the international advanced production line, first-class modern testing base as well as research centers of sand maker, mill and mine-selecting equipment. Scientific management, advanced processing technology and innovative manufacturing theory make the company become the mining machinery manufacturing and exporting base in China. Welcome to visit and purchase.
Contact Infomation
Email: info@sinoftm.com
Website: www.ftmmachine.com/products/crushing-machine/43.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
|
|
| » Posted by: Henan Fote Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Rotary Dryer China/Rotary Dryer For Sand Washing Line |
|
|
Rotary dryer is a rotary steel plate metal cylinder, is welded by steel plates, barrel body is provided with a wheel and the big wheel, drum by means of tyre is supported on the supporting wheels, tires are arranged on both sides of a pair of gear wheel, the indication and limiting cylinder along the inclined direction moving, cylinder by contribute to motor, a speed reducer drives a gear mechanism of rotary. Because the cylinder with a certain gradient and continuous rotation, so that the material under the action of gravity, from one end of the cylinder body more business to the lower end of the mobile, in the moving process is gradually hot air drying.
Rotary Dryer China/Rotary Dryer For Sand Washing Lineconsists of heating device, feeding device, transport device, discharge device, dust extraction device and other connecting parts. For the installation, the rotary drum dryer should incline slightly so that the discharge end is lower than the material feed end in order to convey the material through the rotary drum dryer under gravity. Materials to be dried entes the rotary dryer, and as the rotary dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary drum dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary drum dryer, passing through the hot gas stream as it falls.
According to the works and structural characteristics of the rotary dryer and production maintenance experience of the rotary dryer, in order to guarantee long-term safe operation of the rotary drum dryer machinery and equipment, the key is to adjust the supporting wheel. Maintenance drum drying machine axis of straight sex to make the physical tube along the axial normal reciprocating movement , so that the gear wheels remain stationary turn or for a short period of time by the force of little movement, so that each gear wheel supporting roller more uniform bear the barrel load.
Henan Fote Heavy Machinery Co., Ltd. is specializing in the production of drying machine, ball mill and other mining machinery and equipment manufacturers, machinery and equipment produced by the company is fully consistent with the national standards, and implement the concept of energy saving and emission reduction of national emphasis, introduce the advanced experience of domestic and foreign technology of equipment were improved and achieved excellent results. Welcome to visit and purchase.
Contact Infomation
Email: info@sinoftm.com
Website: http://www.foteinfo.com/rotary-dryer-35.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
|
|
| » Posted by: Henan Fote Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Rotary Dryers Specification In China/Rotary Dryer For Building Materials |
|
|
Rotary dryer is also known as rotary drum dryer. This machine is idely used in building materials, metallurgy, chemicals, industrial drying slag cement limestone, coal, slag, clay and other materials. The aircraft mainly by the rotary, jam plate, transmission, seals, and other support equipment and components. With a reasonable structure, well-produced, high yield, and low consumption, the advantages of operating convenience. Plant products quality assurance, highest free installation debugging agent can be checked with other plants than quality and prices.
1. Rotary Dryer For Building Materials/Rotary Dryers Specification In China Innovation feed tube angle, only not affecting feeding, as may the baiting cylinder progress, more terminal and drying machine material retaining ring contact is appropriate, but extends into the sand dryer cylinder is not too long, control the blanking point away from the retaining ring within 200 mm. In order to prevent the head end without material temperature (the supply of products: products of high temperature alarm) burning material retaining ring and the cylinder, the sand drying machine of feeding tube progress, is conducive to the smooth and avoid damage of high temperature gas chute, the whereabouts of which material natural material screen, and high temperature gas direct contact heat exchange, rate of progress.
2. the drying machine will feed end helical blade to send lost, changed to three angle plate, available 6 mm thick steel plate manufacturing, short leg height and the feeding end ring with the height, and are welded, long leg length is 800 mm, and the drying cylinder welding, 50 mm welding lap distance, natural form 1 cone feeder.Its effect is to slow down the materials in the high temperature belt velocity, and fully absorb heat, the heat exchange rate of progress, and can reduce the drying machine front temperature, prevent burning cylinder and a retaining ring.
As a professional mining machinery manufacturing factory, Henan Fote Heavy Machinery Co., Ltd. has a specialized R&D department and a dedicated export sector. We believed that success comes to a great service. Sincerely hoping that our rotary dryer, ball mill, jaw crusher, cone crusher, hammer crusher, etc. would meet your needs and that both sides could cooperation happily! Welcome to visit our factory!
Contact Infomation
Email: info@sinoftm.com
Website: http://www.foteinfo.com/rotary-dryer-35.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
|
|
| » Posted by: Henan Fote Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Hot Sale Sawdust Pellet Mill Manufacturer |
|
|
Wood pellets are made from compressed biomass materials such as crop waste, cardboard, recycled paper, leaves, lawn clippings or sawdust using the wood pellet mill. By using these renewable resources as raw material, pellets are an excellent green solution for home heating. Henan Fote Heavy Machinery Co., Ltd. as introduced into Germanic advanced pellet pressing technology, inventing the taper-shape roller series sawdust pellet mills. They can make pellets (6-12mm), briquettes (15-30mm), which is mainly applicable to crude fiber granulation, such as: sawdust (especially for soft wood sawdust), cotton stalk and all kinds of crop straw, home wastage, the worn out plastic and the factory reject, the material of low ashesion rate and difficult to forming, they also can be applied to low temperature pelleting, such as: biological fertilizer, organic fertilizer, compound fertilizer. It is especially confirmed to the world market of renewable compression biomass energy demand. Sawdust pellet mills are Fote patent products.
1. This device adopts secondary compression technology which includes screw feeder pre-pressing and piston stamping.
2. Rack section uses high strength steel plates welded together by advanced technology. Reasonable rib plate structure ensures equipment run smoothly with frequent impact loading.
3. The special material and heat treatment process used in key components extend their service life. Die’s service life can be 300-500 tons and that of punch can be 1000 tons.
4. Hot Sale Sawdust Pellet Mill Manufacturer/Hot Sale Sawdust Pellet Mill has advantages of low power consumption (produce one ton of biomass rods consume 40 kwh), high production efficiency, long service life, and low maintenance rate.
5. The spindle adopts No#45 steel forging under thermal refining and machining operation to mould. And then plate the surface with Cr. Thus the device has good strength, toughness, and wearability.
6. Taking into account different characteristics of the material, speed regulating motor or variable frequency motor is equipped to regulate feeding rate, which enables different material to be fed uniformly. Specific type of motor can be adjusted according to customer’s demand.
Henan Fote Heavy Machinery Co., Ltd. is a pioneer company in the field of manufacturing various pellet mill and biomass pellet plant. We have over 20 years experience in providing the pelletizing solutions to recycle waste biomass into solid biofuel, We plan and calculate wood pellet plants according to the requirement of the customer considering the capacity and the local conditions. Welcome to contact or visit.
Contact Information
Email: info@sinoftm.com
Website: http://www.paradisedivingasia.com/equipment/sawdust-pellet-mill.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
|
|
| » Posted by: Henan Fote Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Biomass Pellets Machine/Biomass Pellet Mill Machine |
|
|
Biomass pellet mill is a new type of environmental machinery. It can process the raw material of agricultural and forestry waste such as wood chips, straw, rice husk, bark, by preprocessing and processing, solidify them to fuel with form of high density particulate, it is ideal fuel for replacing kerosene, which can save energy and reduce emissions, with good economic and social benefits.
From the perspective of energy safety, renewable energy can deal with the problem of the lacking of non-renewable energy resources. Opening up the renewable power in rural area could increase farmers’ income, improve rural situation, accelerate the speed of urbanization and it’s a firm way to build a new social countryside. That accelerating the application of renewable energy is the request of implementing the scientific concept of development, and establishing a capital conservation-minded society. In the purpose of environmental maintenance, renewable energy resources could regulate the deteriorating of the ecological environment.
1. The space between press roller and die has more influence on the quality of pellet. Given different raw materials, the optimal space should be from 0.1 to 0.3mm. When the space is more than 0.3mm, the quantity of the production will be lower as the material bed on the die is too thick. When the space is less than 0.1mm, the press roller and die will be worn to a greater extent. Thus, their operation life will be affected. The space can be adjusted in the following way. The press roller bolt is adjusted. The press roller on the die is manually rotated at certain intervals until the operator can not hear the friction noise of press roller and die.
2. The new die of Biomass Pellets Machine/Biomass Pellet Mill Machine should be grinding-in according to following steps. 10kg sand, 16kg biomass material and 4kg used oil should be well mixed. The mixture is filled into the pellet mill for pressing in about 40 to 60 minutes. The mixture is grinded repeatedly until the particles generally become loosened. The operator should ensure 95% die holes are workable.
Henan Fote Heavy Machinery Co., Ltd. develops series of biomass pellet machines to meet the need of market, mainly including the rice husk pellet mill, sawdust pellet mill, straw pellet mill, etc. and biomass pellet plant. Different yield and size of pellets are available. We even can customize biomass pellet machinery as you order. Welcome to contact us.
Contact Information
Email: info@sinoftm.com
Website: http://www.foteinfo.com/biomass-pellet-mill-97.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
|
|
| » Posted by: Henan Fote Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Factory Price Ring Die Pellet Mill |
|
|
Ring die pellet mill usually used for making biomass materials, such as wood pellets or straw pellets. The features of this ring die pellet mill are that there is a driven gearbox which is used for working stably. There are major elements that come with this machine which makes it very popular among people who are involved in pelletizing especially in large quantities. It is due to this machine have a high performance and low maintenance cost.
The most important thing in a pellet mill is the pellet press die. Using Large Output Ring Die Pellet Machine Price/Factory Price Ring Die Pellet Mill, you may be told that ring die is the core of a pellet mill. As the key component of a ring die pellet mill, the ring die has direct influence on the performance and quality of the pellets, and it is related to the upkeep cost. Due to a high proportion of wear and tear in ring die, the replacement cost of ring die is relatively high. It is sharp-sighted for you to learn more about how to repair and maintain a ring die correctly.
As we all know that acidic residue can block and corrode the die holes, so it is necessary to feed non-corrosive oily mixture into the pellet machine to drive out the residues. Besides, the ring die can be boiled in oil to soften the residues. Then the residues are carbonized, which is conductive to the discharge of residues. If the blockage still can not be eliminated, drill out the residue with an electric hand drill and then clean the die with oily material mixed with fine sand.
Henan Fote Heavy Machinery Co., Ltd. has passed ISO9001-2008 International Quality Management System Certificate. Our production system can adapt varieties of biomass materials that have been pretreated, such as logs, recycle wood, chips, sawdust, flakes, straw, barks, wood ends, wasted wood-based panels board, waste cement from board, waste veneer, packing cartons, coconuts, palms,etc. They all can be produced to pellets and briquettes. If you interested in any Fote product, welcome to contact or visit.
Contact Infomation
Email: info@sinoftm.com
Website: http://www.woodpelletmillchina.com/pro/ring_die_pellet_mill.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
|
|
| » Posted by: Henan Fote Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Construction Material Vibrating Screen |
|
|
As a small mechanical production, the utilization ratio in the market of vibrating screen is very high. The vibrating screen itself belongs to the small machinery which achieves the goal of automatic operation the work. At present, the new generation circular vibrating screen which adopts the newest technology has a quite promising market prospect. It meets the actual production needs and can receive better effect so as to achieve a higher goal. The potential will be greater if it meets the market demands; and it will be a positive effect on production if it is suitable for the development requirements.
1. Utilize the manual screening analysis.
For the materials with particle size of over 6mm, its screening analysis belongs to the screening analysis of materials with coarse particle size. Adopt the manual screen made by steel plate punching or iron wire net to conduct the screening analysis. The detailed method is to use one set of screens with different sizes of screening net to screen and separate the ores into various fractions. Then weight the quality of various fractions. If the original ore has high water content then massive slurries and smitham adhere to the large ores, please clean them out in case of affecting the accuracy of screening analysis.
2. Dry method screening analysis
For the screening analysis of materials with particles’ size range of 6-0.038 mm, conduct the bushing screening with laboratory standard. If the requirement of screening analysis’s accuracy is not very strict, directly use the dry method screening analysis is enough usually. The method of dry method screening analysis is to cover the standard screens in order then pour the samples into the topside screening surface and cover it with the upper cover well. Then place it in Construction Material Vibrating Screen/Double Deck Vibrating Screen for the screening of 10-30 min. After that, take down the screens in each layer in proper order and screen on the rubber blanket with hands. If the materials’ quantity got by screening within 1 min is smaller than 1% of materials’ quantity in the screens, then it is thought to reach the end. Or else, the screening should be preceded continuously till the conformation of requirement. After the finishing of dry screen, the quality of every fraction after the screening should be inspected.
Henan Fote Heavy Machinery Co., Ltd. is a famous manufacturer of crushing and screening equipment in China. We can provide many kinds of crushers, including Jaw Crusher, Cone Crusher, Impact Crusher, VSI Sand Making Machine, vibrating screen and attched machines. Also complete set of fixed and portable crushing plant. What we provide is not just the high value-added products, but also the first class service team and problems solution suggestions. Our crushers are widely used in the fundamental construction projects. The complete crushing plants are exported to Russia, Mongolia, Middle Asia, Africa and other regions around the world. We have many crusher experts who are capable of new products searching and developing. Welcome to visit and purchase.
Contact Information
Email: info@sinoftm.com
Website: www.ftmmachine.com/products/crushing-machine/41.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
|
|
| » Posted by: Henan Fote Machinery Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
|
