|
|
|
|
|
|
|
[Sell]
Clay bonded silicon carbide tower tray (plate) for zinc smelting |
 |
|
Our tower tray is designed with excellent performance including high strength, good anti-washing resistance of molten zinc, high oxidation resistance and long service life.
Available Size:
990 mm × 457 mm × 165 mm, 1260 mm × 620 mm × 180 mm, 1372 mm × 762 mm × 180 mm, or according to clients’ demands.
Applications:
Designed for zinc vertical retorting.
Typical Technical Parameter:
SiC: > 90%;
Porosity: < 12%;
Volume Density: > 2.7 g/cm3;
Thermal Conductivity: > 15.5 W/ (m?K);
Compressive Strength: > 195 MPa;
Flexural Strength: > 40 MPa;
Working Temperature: 1000-1400 °C.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Posted by: China abrasives import & export corporation [China]  |
|
|
|
|
|
[Sell]
Nitride bonded silicon carbide (NBSC) rotor for zinc smelting |
|
|
Our NBSC rotor is designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good anti-washing resistance of molten zinc, high condensation efficiency and long service life.
Available Size:
Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm;
Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm.
Or according to clients’ demands.
Applications:
Rotor for splash condenser in electric zinc furnace or vertical retorting furnace.
Typical Chemical Analysis:
SiC: > 80.00%;
Si3N4: > 15.00%;
Free-Si: < 0.20%;
Fe2O3: < 0.20%.
Typical Technical Data:
Porosity: < 15%;
Volume Density: > 2.70 g/cm3;
Compressive Strength: > 120 MPa;
Degassing Efficiency: > 50%;
Revolutions: 300-750 rpm;
Working Temperature: 1000-1400 °C;
Service Life: > 50 days.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Smelting furnace used for brown aluminum oxide |
|
|
China abrasives import & export corporation (CAEC) is China's leading company in the market of BFA. It is a state-owned company subordinated to China National Machinery Industry Corporation (SINOMACH) which is the nation's largest corporation in machinery industry. We have experience in designing various furnaces used for smelting BFA for many Chinese companies. Our proper design of the product line can greatly save the cost. The technical advantages of our product are listed below.
a. High conversion of the raw materials, low materials waste;
b. Low power consumption;
c. Well wiring design, high safety;
d. Easy to operate, less operators, , high working efficiency;
e. Novel cooling system, long furnace service life;
f. Special dust collection system, low environment pollution.
Available Capacity:
Fixed furnace: 5000 kVA, 4000 kVA, 3600 kVA, 1800 kVA;
Tilting furnace: 10000 kVA, 7500 kVA, 6300 kVA, 5000 kVA, 4000 kVA, 3000 kVA;
Or according to clients' demands.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
upcast equipment for copper alloy and oxygen free copper |
|
|
Our company is wholly-owned by China National Machinery Industry Corporation (SINOMACH) which is China's largest corporation that specialized in complete equipment design and manufacture. Our product for upward (and horizontal) casting of copper alloys and OFC is the most advanced and efficient in China market. In the passed 20 years, we have provide Vietnam, Brazil, Iron, Thailand and South Korea with more than 200 sets of equipment for copper rod (Ф8-30 mm), belt (width 170-300 mm, thickness 0.6-4.5 mm) and pipe (horizontal casting).
1. Equipment type: OFCE-1;
2. Annual capacity: 1000-15000 ton;
3. Annual working time: 300 days;
4. Furnace type:
Single furnace,
Double furnace: smelting furnace ×1, keeping furnace ×1,
Triple furnace: smelting furnace ×2, keeping furnace ×1;
5. Power consumption in smelting copper: <335 kWh/ton;
6. Number of casting strands: 4-24;
7. Casting rod diameter: Ф8-30 mm;
8. Casting speed: 200-3200 mm/minute;
9. Upward pitch: 1-5 mm;
10. Casting rod clamping method: cylinder type;
11. Liquid tracking precision: ±1 mm;
12. Coil diameter: Ф 600-1800 mm;
13. Coil weight: 2-5 ton;
14. Coiling mode: full automatic;
15. Cathode charging: whole piece, automatic;
16. Console interface: big screens can display data intuitively, touch screen combined with mechanical press buttons can reduce misoperation efficiently, automatic date saving can make your supervision of the process conveniently.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Graphite molds for copper continuous casting |
|
|
Our company is wholly-owned by China National Machinery Industry Corporation (SINOMACH) which is the largest Chinese company that specialized in complete equipment design and manufacture. Besides whole set upward (and horizontal) casting equipments, we can also provide the components for the equipment. For upward casting equipment, the components that we can provide are listed here.
Furnaces and refractory bricks; crystallizer parts; graphite die moulds and protection kits; thermocouples and protection tubes; floats for liquid level tracking; aluminum silicate blankets and inner linings; molten channel; rod roller; Calcium Hexaboride and flake graphite.
Of course, we can offer products for casting process of steel, stainless steel, gold and other non-ferrous. All these products mentioned here can be customized.
The following are the information of our graphite die moulds for copper continuous casting.
Available Type and Size:
For rod: Ф8-30 mm;
For pipe (horizontal casting): OD max Ф35 mm;
For belt: width 170-300 mm, thickness 0.6-4.5 mm.
Typical Chemical Analysis:
F.C.: > 99.99%;
Ash content: < 0.01%;
Density: > 1.90 g/cm3;
Porosity: < 15%;
Average Pore Size: 2.2 mm;
Electric Strength: > 9.0 Ωmm2/m;
Flexural Strength: > 45 MPa;
Compressive Strength: > 90 MPa;
Thermal Expansion Coefficient: < 4.5×10-4 m/K.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Aluminum titanate stalk (riser) tube and dosing tube |
|
|
Our aluminum titanate ceramic stalk tube (or riser tube) is designed for die casting of molten aluminum, aluminium alloys, magnesium alloys and copper alloys. The advantages of our product are listed below:
a. High melting point;
b. Excellent thermal conductivity, low thermal expansion;
c. High washing resistance and thermal shock resistance;
d. Low wettability with the melts;
e. High cost performance, long service life.
Also we can supply stalk (riser) tubes made of other materials or by different process, for example, Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), nitride bonded SiC, O’-SiAlON, dense fused silica and coated cast iron. Please contact us if interested.
Available Size and Types:
ID max: Φ200 mm, Length max: 1700 mm;
Metal flange type or one body type.
Applications:
Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys.
Typical Technical Data:
Porosity: < 6.5%;
Bulk Density: > 3.20 g/cm3;
Flexural Strength: > 50 MPa;
Thermal Conductivity (600-800 °C): > 0.5 × 10-6 W/ (m?°C);
Thermal Expansion (800 °C): < 0.80 × 10-6/ °C.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Nitride bonded silicon carbide stalk (riser) tube |
|
|
Our NBSC stalk tube (or riser tube) is designed for die casting of molten aluminum, aluminium alloys, magnesium alloys and copper alloys. As replacement of cast iron and old ceramic ones, our product has some exceptional features as follows:
a. High density, high mechanical strength;
b. Excellent thermal conductivity, low thermal expansion;
c. High washing resistance, oxidation resistance, acid resistance and thermal shock resistance;
d. Low wettability with the melts, bring minimum impurities to the melts;
e. High cost performance, long service life.
Also we can supply stalk (riser) tubes made of other materials or by different process, for example, Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), O’-SiAlON, aluminum titanate, dense fused silica and coated cast iron. Please contact us if interested.
Available Size & Types:
ID max: Φ220 mm; Length max: 1700 mm;
Metal flange type or one body type.
Applications:
Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys.
Typical chemical analysis: SiC: > 70.00%; Si3N4: >20.00%; Free-Si: < 0.20%; Fe2O3: < 0.15%.
Typical Technical Data:
Porosity: < 11%;
Bulk Density: > 2.65 g/cm3;
Compressive Strength: > 175 MPa;
Flexural Strength: > 70 MPa;
Thermal Conductivity (1400 °C): > 16.5 × 10-6 W/ (m?°C);
Thermal Expansion (20-1400 °C): < 4.6 × 10-6/ °C;
Maximum Working Temperature: 1550 °C.
If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Nitride bonded silicon carbide heater protection tube |
|
|
Our product is designed for smelting or casting of molten aluminum, aluminium alloys, magnesium alloys, zinc and copper alloys.
a. High density, high mechanical strength;
b. Excellent thermal conductivity, low thermal expansion;
c. High washing resistance, oxidation resistance, acid resistance and thermal shock resistance;
d. Low wettability with the melts, bring minimum impurities to the melts;
e. High cost performance, long service life.
Also we can supply Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), O’-SiAlON tubes. Please contact us if interested.
Available Size & Types:
ID max: Φ220 mm, Length max: 1700 mm;
Vertical type (metal flange type, one body type), horizontal type and pencile type.
Applications:
Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys; zinc smelting.
Typical chemical analysis: SiC: > 72.00%; Si3N4: >25.00%; Free-Si: < 0.20%; Fe2O3: < 0.15%.
Typical Technical Data:
Porosity: < 11%;
Bulk Density: > 2.60 g/cm3;
Compressive Strength: > 175 MPa;
Flexural Strength: > 70 MPa;
Thermal Conductivity (1400 °C): > 16.5 × 10-6 W/ (m?°C);
Thermal Expansion (20°C-1400 °C): < 4.0 × 10-6/ °C;
Maximum Working Temperature: 1550 °C. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Graphite degassing rotor |
|
|
Our graphite rotor is made from high quality graphite powders, designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good washing resistance of molten aluminum, high oxidation resistance, high-speed and efficient dispersal and removal of hydrogen and other unwanted particles, long service life.
Available Size:
Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm;
Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm.
Applications:
Rotating degassing system for molten aluminum and aluminum alloys.
Typical Chemical Analysis:
Fixed-C: > 99.90%;
Moisture: < 0.10%;
Ash: < 0.10%;
Volatile Matter: < 0.10%.
Typical Technical Data:
Porosity: < 12%;
Volume Density: > 1.80 g/cm3;
Compressive Strength (bulk): > 60 MPa;
Oxidation Rate (750 °C): < 10 mg/ (cm2?hour);
Degassing Efficiency: > 50%;
Revolutions: 200-750 rpm;
Working Temperature: 650-800 °C;
Service Life: 50-60 days. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Nitride bonded silicon carbide (NBSC) degassing rotor |
|
|
Our NBSC rotor is designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good washing resistance of molten aluminum, high oxidation resistance, high-speed and efficient dispersal and removal of hydrogen and other unwanted particles, long service life.
Available Size:
Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm;
Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm.
Applications:
Rotating degassing system for molten aluminum and aluminum alloys.
Typical Chemical Analysis:
SiC: > 75.00%;
Si3N4: > 20.00%;
Free-Si: < 0.20%;
Fe2O3: < 0.20%.
Typical Technical Data:
Porosity: < 13%;
Volume Density: > 2.70 g/cm3;
Compressive Strength: > 170 MPa;
Degassing Efficiency: > 65%;
Revolutions: 200-750 rpm;
Working Temperature: 650-1400 °C;
Service Life: >120 days. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Silicon carbide (SiC) ceramic foam filter for non-ferrous |
|
|
Our product is designed for filtering or purifying of molten aluminum, aluminium alloys, magnesium alloys and copper alloys in their smelting or casting process.
a. Excellent thermal conductivity and washing resistance;
b. Bring no impurities to the melts;
c. Long service life.
Also we can supply alumina, zirconia and magnesia based ceramic foam filters for ferrous or steel melts.
Available Specs:
PPI: 10-60;
Maximum Thickness: 50 mm;
Maximum Length (Diameter): Φ600 mm.
Typical Technical Data:
SiC: 65-75%, Al2O3: 22-35%, SiO2: 3-8%, Fe2O3 < 0.15%;
Porosity: 80-95%;
Volume Density: < 0.40-0.60 g/cm3;
Compressive Strength: > 2.20 MPa;
Flexural Strength: > 1.00 MPa;
Thermal Shock Resistance (1110 °C): > 7 times;
Working Temperature: < 1500 °C. |
|
| » Posted by: China abrasives import & export corporation [China] |
|
|
|
|
|
[Sell]
Dielectric High Reflective Coating |
|
|
| Dielectric High Reflective Coating Dielectric coating can produce very high reflection (more than 99.8% at designed wavelength), minimizing losses in nearly all optical systems and is very durable, easily cleaned, and resistant to laser damage. They are commonly used in a single wavelength laser cavity where the lowest cavity loss at a center wavelength is essential. Center wavelength range from 250nm to 2200nm for Dielectric High Reflective Coatings. |
|
| » Posted by: WTS PHOTONICS CO.,LTD [China] |
|
|
|
|
|
[Sell]
LiFePO4 Battery pack(24V) |
|
|
| LiFePO4 Battery pack(24V) Product features: 1) Long cycle life: more than 2000 times (charge and discharge at 1C, 80% capacity retention after 2000 cycles). 2) High safety: no fire and explosion in overcharge test at the voltage up to 30V and in short-circuit test, nail test, heat shock up to 130¡æ test. 3) Good charging and discharging performance. 4) High discharge rate up to 10C. 5) Environmental-friendly: all raw material of the batteries are environmental-friendly. 6) Wide working temperature range: from -10¡æ to 60¡æ, extremely cold and hot weather will not effect its performance. Type HKE- IFP-240-10 1. Basic Characteristics Material of battery case According to customers¡¯ requirements Weight ¡Ü2Kg(excluding battery case) Dimension(L*W*H) depend on customers¡¯ choices Working temperature Recharge Temperature 0¡«45¡æ Discharge Temperature -20¡«65¡æ Battery Hopower keeping ability (store in one month) ¡Ý95% 2. Technical Data Rated Voltage 24V Rated Capacity C1 ¡Ý 10Ah Battery Resistance ¡Ü110 m¦¸ Recharge Way of Recharge CC/CV£¨Constant Current;Constant Voltage£© Standard Recharge Current 2A Max Recharge Current 5A Max Recharge Voltage 29.2V Cell Overrecharge Protection Voltage 3.9V Discharge Standard Discharge Current 5A-10A Max Discharge Current 20A Discharge Cut-off Voltage 18.4V Cell Cell Overdischarge Protection Voltage 2.0 V Rate Discharge 2C >96%C1 3C >93%C1 5C >90%C1 Cycle Life 2000 Times (Nomal temperature 1C; Recharge 1C;Discharge cycle to 60%, 100%DOD) 3. Safety Test Short CircuitSafety Test No fire, No explosion OverchargeSafety Test CollisionSafety Test NeedlingSafety Test ExtrusionSafety Test 130¡æHigh TemperatureSafety Test Applications - - Portable electronic devices,power wheelchairs, High capacity mobile power, Customs Sterilizer Battery,Electric bike&electric motocycle,electric vehicles, power tools, electric devices, solar and wind energy storage power |
|
| » Posted by: Highshine Industrial & trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Inverter Digital pulse Mig welder |
|
|
| highshine Digital pulse mig welding machine Product Description THREE FUNCTIONS (Pulesd-MIG/MIG/MMA) Descriptions: Adopt advanced IGBT technology, full digital control; Combined 6 welding processes; Easy to add and lock welding processes according to user's option; IGBT inverter technology makes the machine more energy-saving; For higher degrees of efficiency, lower weight and smaller dimensions; LCD and LED display, parameters can be precise adjusted; Synergic operation in MIG/MAG and Pulse MIG/MAG welding process; Built-in expert database, widely used for various welding material and sheet thickness; Long distance upgrading, ,monitoring ,diagnose and control; Users can get additional value from upgrading the welding software; Every process with 31 memory blocks easy to save and the recall the jobs. Process: MMA/MIG/Pulse MIG Base metals: Aluminium Aluminium Alloy Steel Fields of use: Automobile and component supply industry Industrial plants, pipeline construction, assembly companies Manufacture of special vehicles and construction machinery Plant, container and machine construction, steel engineering Rail vehicle construction Robotic welding Shipbuilding / offshore Technical parameter: 1. rated input voltage(V) 3-phase AC,380V,50/60Hz 2. input voltages range(V) 260V-460V 3. rated output capacity 315A,32.6V 4. rated open circle voltage(V) 55V-80V 5. duty cycle 60% 6. powers factors COS 0.85 7. efficiency 85% 8. insulations class H 9. dimensions L X W X H(mm) 510X255X540 10. weight (Kg) 25 11. parameter memory blocks 30 parameter for GMAW,Pulsed-GMAW welding 12. current(A) 30-315 13. arc force(A/ms) 1-10 14. voltage(V) 10-34 15. welding copy 0-11 16. operation ways 2T,4T 17. second current(A) 30-315 18. second voltage (V) 10-34 Parameter for MMA welding 12. current(A) 10-315 13. arc force(A/ms) 0-10 14. start current(A) 10-315 15. start time (s) 0.01-1 16. break arc adjust (V) 20-80 |
|
| » Posted by: Highshine Industrial & trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Duct Manufacture Auto-line III |
|
|
| Duct Manufacture Auto-line III Products Detail Auto-line III consists of a metal feeding frame, leveling and grooving equipment, hydraulic punching square notch equipment, hydraulic cutter and folder. The electrical control system uses a computer with a closed-loop and servo-system to increase the precision and reliability of the manufacture line. The maximum working speed is 10m/min. The length tolerance is ¡Ào.5mm. The diagonal line tolerance is ¡À0.8mm. One team will produce 1000m2 of square duct by using this syste The working flow: Coiler--metal feeding frame--levelling and grooving equipment Square notch and punch cutter--fold and cut metal for TDF Fold and cut metal for inserted flange Cut metal for duct Basic Equipment A: Two units of motor-driven metal feeding frames B: One set of leveling and grooving equipment C: Four sets of hydraulic punching square notch dies D: Hydraulic cutter and folder E: Industrial computer and special software Note: A: It can cut fixed sized metal, also can be used with a plasma cutting machine. B: (a) Punch "C", "S" inserted cleat notch. It can be used with "C" cleat and "S" inserted flange machines. (b) Due to different connecting methods for notch cutting, it can be used with TDF flange machine and TDF connecting machines. (c) it's able to punch all kinds of notches which are used by angle iron flange or "Z" shape flange machine. It can fold " ", " "and " " shape, and can be used with combined seaming machine to produce a complete set of duct. C: It can punch TDC notch and fold metal for inserted flange, to produce " " shaped duct, for example. It can be used with both combined seaming machine and inserted flange to manufacture a complete set of duct |
|
| » Posted by: Highshine Industrial & trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
W11 symmetric three roller coiling machine |
|
|
| Product Description W11 three roller coiling machine, mechanical movements and mechanical transmission, the roller separable from the take-off and landing Reclaimer electric roll. In accordance with the requirements of customers and the installation of special next round so as to achieve volumes iron, rolled steel pipe, and other functions of different types. Specifications Model The largest plate bending thickness (mm) The largest plate bending width (mm) The yield very Sheet (mpa) Plate bending speed (n/min) The smallest diameter full plate bending (mm) On the roll diameter (mm) Under roller diameter (kg) Two of Roller (mm) The main electrical power (kw) Weight machines (kg) External dimensions (length * wide * H) (mm)and hydraulic electric power (kw) W11-6*1500 6 1500 265 7.16 380 180 160 210 5.5 2.6 3310*1210*1330 W11-6*2000 6 2000 265 7.16 380 180 160 220 5.5 3.1 3810*1210*1330 W11-6*2500 6 2500 265 7.16 500 190 170 260 7.5 4.6 4310*1210*1330 W11-6*3200 6 3200 265 6.45 500 240 200 310 11 7.2 5200*1400*1200 W11-8*2000 8 2000 265 7.16 450 190 170 260 7.5 4.1 3810*1210*1330 W11-8*2500 8 2000 265 6.46 500 240 200 310 11 6.7 4500*1420*1610 W11-12*2000 12 2000 265 5 500 240 200 310 11 6.7 4050*1420*1610 W11-12*2500 12 2500 265 5 750 260 220 330 11 6.3 5000*1500*1300 W11-12*3000 12 3000 265 5 650 280 240 360 15 12.1 5500*1500*1300 W11-16*2000 16 2000 265 5 750 260 220 330 11 5.8 4500*1500*1300 W11-16*2500 16 2500 265 5 750 280 240 360 15 6.5 5000*1500*1300 W11-16*3200 12 3200 265 5 900 340 280 440 22 15.6 6300*1600*1900 W11-20*2000 20 2000 265 5 750 280 240 360 15 7.8 4500*1500*1300 W11-20*2500 20 2500 265 5 850 340 280 440 30 14.7 5600*1600*1900 W11-25*2000 25 2000 265 5 850 340 280 440 30 13.2 5100*1600*1900 W11-25*2500 25 2500 265 4.5 900 380 300 490 37 24.7 6000*4600*2150 W11-30*2000 30 2000 265 4.5 900 380 300 490 37 23 5500*1460*2150 W11-30*2500 30 2500 265 4.34 1100 460 380 600 45 28 6900*2300*2800 W11-30*3000 30 3000 265 5 1200 460 400 600 45 32 7400*2300*2600 W11-30*3200 30 3200 265 5 1200 500 400 600 45 35.2 7600*2300*2600 W11-40*2000 60 3000 265 5 1200 480 400 600 45 28.7 6400*2300*2800 |
|
| » Posted by: Highshine Industrial & trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Special prisms |
|
|
| Special prisms Special prism good quality,cheap prisms |
|
| » Posted by: WTS PHOTONICS CO.,LTD [China] |
|
|
|
|
|
[Sell]
Penta Prisms |
|
|
| Penta Prisms The deviation angle of 90 is thus independent of the orientation of the prism, making it especially important in applications in which the prism orientation cannot be precisely controlled. Due to geometry that total internal reflection cannot be used, the reflecting surfaces must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum. Sometimes, the coated surfaces are with black painting. |
|
| » Posted by: WTS PHOTONICS CO.,LTD [China] |
|
|
|
|
|
[Sell]
Equilateral Dispersing Prisms |
|
|
| Equilateral Dispersing Prisms Equilateral prisms are mostly used to disperse the spectrum. |
|
| » Posted by: WTS PHOTONICS CO.,LTD [China] |
|
|
|
|
|
[Sell]
expanded metal |
|
|
expanded metal, expanded metal lath,expanded mesh,expanded wire mesh,aluminum expanded metal
www.wiremeshdragon.cn www.papermachineclothings.com flydragon00071@hotmail.com
Expanded metal mesh can be made from a range of materials, such as carbon steel, aluminum metal, stainless steel metal, nickel metal and so on. Expanded metal mesh are widely used as steel reinforcement materials in petroleum, chemical industry and building.
Surface treatment hot-dipped, electrol galvanized, pvc-coated.
Type A Sizes:
Long way of mesh: 12.5-200mm
Short way of mesh: 5-80mm
Thickness: 0.5-8mm
Stand Width: 0.5mm-10mm
Expanded metal mesh at length from 1M-30M and width from 600-2400mm. |
|
| » Posted by: Fly Dragon Wire Mesh Co.,Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
|
