|
[Sell] Canneed VSM 3A Automatic Seam Monitor(Automatic seam measurements for cans) |
|
|
The Canneed "VSM 3A Automatic Seam Monitor" is used with a PC to be a compact measuring system for quick and accurate automatic seam measurements and storing of seam images. The seam is positioned manually in front of the camera and is digitised by the computer. Within seam image archive software the computer offers a measurement. The seam length, body hook, end hook, actual overlap, percentage overlap; seam gap, seam thickness and body hook butting% are measured. At the end of the measurement an evaluated seam appears including dimension lines and measured values. This may be stored in computer or printed out on a laserprinter. The values can be stored in a Excel file and are displayed in on-screen if values are within specs. Feature: *VSM 3A Automatic Seam Monitor continues to set new industry standards: *Data can be stored in a Excel file! *Measured values are displayed in on-screen and alarm if values are not within specs! *Measures a seam in seconds ! *Seam image can be printed, stored! *Calibration function Technical data (changes reserved): Power supply: 115 V/230V Serial interface: RS 232 C Accuracy: +/-0.01 mm Languages: English / Chinese Cans dia. :52-200 mm, custom made up to ?300 Dimensions: 400 x 200 x 150 mm(W x D x H) Weight: 5 kg VSM 3A Automatic Seam Monitor consisting of: * VSM 3A Video Seam Imager * Seam measurement software VSM 2.0 * Calibration piece 2mm option: PC: Operating system Windows XP/HDD min. 80 GB /RAM min. 512M/Monitor 17" LCD/CD-room;/2 free USB ports |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed PTT-200 POP & Tear Tester |
|
|
The Canneed "Pop & Tear Tester PTT-200" has been developped for testing EO/ RP /SOT/ OVAL ends. The measurement is microprocessor-controlled. As test result the POP and TEAR strength appear in the display. Depending on the holder, ends of various diameters can be tested. The PTT-200 is easy to use. Install the sample in the End holder, attach the hook into the ring of the tab. Depress the "start" button. The PTT-200 will then perform the tests according to the preset test procedures. If the measurement was successful you will see the results in the display: POP-force and TEAR-force value. The forces required transmitted via the RS-323 port. Feature: *Industry Standard *Program Logic Control System (PLC) Controlled *LCD touch-screen Display *Rs-232 Communications Capability Technical data (Changes reserved): Measuring range : 0-100N Resolution :0.1 N Controller : Program Logic Control System Display : LCD touch-screen Interfaces : RS232C Power supply: 115/230V/50-60Hz Sample type : RP/SOT/EO/ OVAL Dimensions : 850 x 350 x 420 mm L x B x H Weight :20kg |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed ZM570-D Digital Body Blank Gauge |
|
|
Canneed "ZM570-D Digital Body Blank Gauge" These units are made for the quality control of can body blanks. 1. Precision gauge for measurement of body blanks with the help of a incremental ruler/ fine measuring gauge combination and a digital dial indicator for the angle measurement 2. Constant measuring force for accurate, repeatable, user-independent results 3. Sequential measurement of blank height, blank width and squareness Technical data (changes reserved) : Model ZM-370-D ZM-570-D ZM-920-D ZM-1220-D Range 0-370 mm 0-550 mm 0-920 mm 300-1220 mm Long 590 mm 790 mm 140 mm 1441 mm Width 630 mm 630 mm 630 mm 824 mm Height 400 mm 400 mm 400 mm 400 mm weight 33 kg 39 kg 50 kg 78 kg Resolution 0.01 mm Accuracy (20°C): ± 0.02mm Power supply 85-230 V , 50-60Hz |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed DER-3 Digital Enamel Rater |
|
|
The Canneed "DER-3 Digital Enamel Rater" is the industry standard. The new CANNEED Enamel Rater DER-3 instrument test the coverage of the enamel coating inside food and beverage cans. Also aerosol-cans may be tested with DER-3. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED. The instrument applies a constant voltage across the can body and an electrode immersed in an electrolyte-filled can, and measures the resulting current. Test voltage is set at 6.3 VDC. Operating range is 0 to 300 milliamperes with accurate resolution within 0.1ma. The instrument operates in industry standard 4 second mode, continuously, or can be programmed to measure any desired time. In 4-second mode, the display shows the reading only at 4 seconds. In continuous mode the reading is displayed beside elapsed time with the 4-second reading automatically stored in memory for recall. A simple and foolproof calibration self-test verifies correct, accurate operation. Location of exposed metal can be determined by reversing voltage which causes bubbles of gas to form on exposed metal for easy visual identification. Electrolyte level and can contact sensors ensure that testing begins only when can is properly filled with electrolyte solution and good electrical contact with the can has been established. The sturdy enclosure includes a sealed-membrane keypad for protection against moisture and corrosion in the factory environment. An RS232 serial interface permits use with remote computers, printers or data collectors. The CANNEED End Panel Holder can be used with any CANNEED Enamel Rater to test for metal exposure on can ends. The test is performed in the same manner as on a can. Electrolyte is added to the plastic cup, the can end is fitted onto the beveled end of the cup, and a vacuum is applied to hold the end securely on the cup. When the cup is inverted, the elctrode and can end become immersed in the electrolyte and the reading is displayed on the Enamel Rater. The CANNEED End Panel Holder consists of a lucite cup mounted to rotate on its horizontal axis. The cup is beveled to make a tight seal on the can end. An electrode and vacuum connection are mounted within the cup. On the bakelite base a vacuum stopcock and a moveable contact arm, which completes the electrical circuit when the assembly is inverted. A cable adaptor footswitch is required to connect a CANNEED End Panel Holder to the CANNEED Digital Enamel Rater. Technical Specifications (changes reserved): Sample type : 2- and 3-piece cans. Also aerosol-cans Range: 0 to 300 ma Resolution: 0.1mA Accuracy: +/- 5% Power supply: AC115 V/230V to DC9V Rear Panel: RS232 serial output Display unit Dimensions:162 x 200 x 80mm ( W x L x H ) Can holder Dimensions: 210 x 228 x 250 mm(W x L x H) Weight: 4 kg |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed CTG-100 Coating Thickness Gauge |
|
|
The Canneed's "CTG-100 Coating Thickness Gauge" provides a computer enhanced method of rapidly assessing lacquer film weight of both internal and external coatings on beverage and food cans. The system provides the following benefits to the Can and End manufacturer: Reduced lacquer consumption - With its exact calibration system bringing improved accuracies, film weight data will be precise, leading to improved control and potentially lower film weight targets. Greater product quality - Accurate readings also mean that coating or spray equipment will be setup and maintained more closely to the required specifications, improving the quality of, and confidence in, your product. Better operating efficiencies - The Gauge features microprocessor control, digital readouts and data output to the printer and computer. This enables rapid yet accurate operation, reducing unproductive operator time and allowing quicker machine setups. Lower spoilage - The Gauge's quick operation and ability to be sited out on the production line enable test frequencies to be increased at no additional cost. Problems and trends will be spotted earlier, reducing the quantity of bad product made on the line. Technical Specifications (changes reserved): Range: 0 to 999.9 g/m2 Resolution: 0.1 g/m2 Rear Panel: RS232 serial output Power supply: 115 V/230V |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed VRM 3A Video Rivet Monitor |
|
|
The "Canneed VRM 3A Video Rivet monitor" is a Video camera system to observe and evaluate the rivet profile images of ends. Any end of varying diameter may be tested. The end is cut throught the rivet by the low speed saw, the rivet is positioned manually in front of the camera. The rivet profile images display on the display. The ' Canneed VRM 3A Video Rivet monitor ' can be used with monitor to just observe and evaluate the rivet profile images. The ' Canneed VRM 3A Video Rivet monitor ' also can be used with a PC to be a compact measuring system. Within VRM image archive software the computer offers a measurement. This may be stored in computer or printed out on a laserprinter. |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed SMM-200 Score Measure Microscope |
|
|
Canneed "SMM-200 Score Measure Microscope" has been used in daily production control since many years worldwide, and it has shown many advantages in companrison with other methods. The sample end is put on a two dimensional platen, supported by measuring needle.The high definition CCD camera system is used to take clear pictures of the groove bottom, which showed on the display. The score residual and score depth and plate thickness can be measured. SMM-200 Score Measure Microscope has a free working distance of about 8mm at the actual magnification of 50 X,The measuring repeatability is within +/0.002mm. |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed CSS-200 seam saw |
|
|
CANNEED "CSS-200 seam saw" is a special seam circular saw with double cut for can double seam inspections. The CSS 200 was specially designed for 2- and 3-piece cans. Also aerosol-cans may be sawed with this saw. The nitrated blades achieve together with the speed of approx. 1.000 r/min. a very plain cut surface. The seam image on VSM 6A Automatic Seam Computer (Video Seam Monitors), and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability. Technical data (changes reserved): Sample can dia. : 45-260mm Sample type : beverage, food, and aerosol cans Saw blades: 80 x 22 x 0,5 mm , also available with 100 x 22 x 0,5 mm Speed: approx. 1.000 r/min. Power supply: 230 /115 V Dimensions: L370×W340×H200mm Weight : 20kg |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed STR-100 Seam Stripper |
|
|
The Canneed automatic "STR-100 Seam Stripper" is a sensible, affordable, teardown method to prepare the double seam teardown analysis. One fast, safe teardown operation without damaging or distorting the cover hook. Reduce teardown time for more frequent inspections. Tooling quick change in few seconds. Models are available for most common can sizes of beverage, food, and aerosol cans. When ordering, the end diameter and can height must be specified so that the appropriate change parts are included. Efficient cut and strip both aluminium and steel cans in a single motion. 10 seconds per can. Eliminates the repetitious actions by hand . An important part of any seam evaluation is the actual teardown of the can seam to determine tightness or wrinkle rating. Technical data (changes reserved): Sample can dia. : 50-88mm, custom made up to ?160mm Sample type : beverage, food, and aerosol cans Power supply: 115 V/230V Dimensions: 250 x 400 x 380 mm(W x D x H) Weight: 16 kg |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed CEBT-100 Buckle Tester for Can and end |
|
|
The "Canneed CEBT-100 Buckle Tester for Can and end" determines the exact pressure at which the Can and End begins to buckle. With 4 Measuring mode: 1. Buckle Bottom For Can 2. Peak Test For Free End 3. Missile Test For Free End 4. Peak Test For Seamed End The sample is placed in the holder. After closing the door pressure is applied. Fast pressure increase up to the expected value, from there the "speed of pressure increase" may be set within the device. The test is terminated as soon as the can or end buckles. The maximum pressure value is shown in the display. Any can and end of varying dimensions may be tested: inserts are available that can be exchanged within seconds. Feature: *Industry Standard *Program Logic Control System (PLC) Controlled *LCD touch-screen Display *Rs-232 Communications Capability * Overload Protection *Test Point For Calibration *"speed of pressure increase"may be set Technical data (changes reserved): Measure range: 0-900 Kpa Resolution: 1 Kpa Rear Panel: RS232 serial output Power supply: 115/230V/50-60Hz Pneumatic supply: 10bar Dimensions: 770 x 500 x 1100 (W x D x H ) Weight: 40 kg
|
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed ABT-100 Burst Buckling Tester for aerosol cans |
|
|
The "canneed ABT-100 Burst Buckling Tester for Aerosol Cans" is used to determine the buckle value of bottom and end (dome) of aerosol cans and the pressure at which the can bursts. At high pressures from approximately 22 - 28 bar, it may happen that deformations of the valve and a higher burst pressure. Technical data (changes reserved): Pneumatic supply: 5bar Max. Working pressure: 40 bar Max. diameter: all standard aerosol cans Dimensions: 555 x 400 x 860 mm(W x D x H) Weight: 50 kg |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed KZJ-SST-2 Secure Seal Tester |
|
|
KZJ-SST-2 Secure Seal Tester The "canneed KZJ-SST-2 Secure Seal Tester" is used to test seal integrity on the glass or plastic containers and cans. The KZJ-SST-2 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The KZJ-SST-2 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings. KZJ-SST-2 is constructed from anodized aluminum, stainless steel, and plastic materials. The tester's rugged construction withstands production line abuse, yet is accurate enough for laboratory use. Technical data (changes reserved): Measurement range: 0-16 bar Pneumatic supply: handling up to 200 bar inlet pressure, Sample capacity : 330 mm height × 150 mm dia. max. Dimensions: 320 x 380 x 720 mm(W x D x H) Net Weight: 15 kg |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed IDG Can Internal Diameter Gauge |
|
|
Canneed "IDG-100, IDG-200 Can Internal Diameter Gauge" This unit serves for quickly checking the Internal Diameter of can. It is equipped with a calibration piece. IDG-100 is for small diameter can ; IDG-200 is for big diameter can It is equipped with a digital dial gauge with "reset" and "preset" function, LCD display and data outlet for connecting the unit to a computer via multiplexer, if required. Technical data (changes reserved): Resolution: 0,01 mm Power supply: Battery, SR-44, approx.5.000 h Accuracy: 0.02mm |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed CSG-d Countersink Gauge (digital) |
|
|
The CANNEED "CSG-d Countersink Gauge" is a Digital gauges for measuring Countersink depth parameters ( the depth of beader of can). With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauges may be connected to a computer via a multiplexer. Option: Countersink Gauge (dial indicator) Technical data (changes reserved): Resolution: 0,01 mm Measure range: 0-10 mm Power supply: Battery, SR-44, approx.5.000 h |
|
» Health & Beauty/Equipment |
|
|
|
[Sell] Canneed CLT-600 Leak Tester for can |
|
|
The canneed "CLT-600 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath. The can is fixed to magnet disc plate and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. End and side seams visible. A special parallel clamping system enables to measure different diameters and heights with one device. The clamping pressure and the test pressure may be set independantly. The operator determines the period of time the cans are under water. If he switches the by-pass lever and presses the two button valves, the cans deaerate and are lifted out of the water.The whole test cycle is automated and is pneumatically controlled by pressure regulator valves. Technical data (changes reserved): Maximum test pressure: 4 bar Max. diameter: 130 mm Max. can height: 300 mm Bath dimensions: 1500 x 600 x 500 mm (W x D x H) Dimensions: 1500 x 800 x 800 mm(W x D x H) Weight: 200 kg |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed ELT-100 Leak Tester for End |
|
|
The "Canneed model ELT 100 Leak Tester for End"is used to determine the pressure at which ends buckle. This tester is also used to test for pin hole leaks in the tab score and rivet area. The ELT 100 applies high pressure air to the product side of and end until the end fails. Leaking spots are made visible by revealing bubbles in the water bath. The failure of an end occurs either when the end buckles or when it starts leaking; leakage is generally caused by faulty scores or rivets. The ELT 100 is easy to use. The test sample is placed on the Change Part, the water chamber is closed, and pressure is applied to the product side of the end. At some point the end will either buckle or start to leak. The pressure at which the failure occurs can be obtained from the front- panel mounted gauge, which incorporates a lazy hand for easy end failure recording. Each end diameter or shape requires specially adjusted holders, which can be exchanged easily. Technical data: (changes reserved) Pressured air supply : 6 bar min. ,10 bar max Max. test pressure : 6 bar max (adjustable) Sample Capacity : 200mm dia max Pressure gauge Range : 0 -1000 kpa, Graduation :20 kpa Dimensions : 600 x 420 x 600 mm L x B x H Weight :approx.25kg Water overflow bath size :10L |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed AXL-4000 Axial Load Tester |
|
|
The "canneed AXL-4000 Axial Load Tester" measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display. Features *Industry Standard *Exceptionally Parallel Platens *Durable Load Cell Design *PLC Controlled *LCD touch-screen Display *Rs-232 Communications Capability *Mechanical Overload Protection *Display the max. and min. measuring value and average after several test. Technical data (changes reserved): Measure range: 3000 N Resolution: 1 N Rear Panel: RS232 serial output Power supply: 115 V / 230 V, 50-60Hz Max. can diameter: 80 mm Max. can height: 160 mm Dimensions: 500 x 400 x 600 mm (W x D x H ) Weight: 50 kg |
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed EBT-100 Buckle Tester For Loose Ends |
|
|
The Canneed "EBT-100 Buckle Tester for loose ends" determines the exact pressure at which the end buckles. Any end of varying diameter may be tested: chang parts are available that can be exchanged within seconds. The loose ends is placed in the holder. By the ring-like laying-on device the end is being fixed in its circumference. Close the door, Depress the "start" button. The "EBT-100 Buckle Tester" clamps the end firmly and thightly. Fast pressure increase up to 5 bar (programmable to just bellow the expected buckle value), from there the "speed of pressure increase" may be set within the device. The test is terminated as soon as the end buckles. The maximum pressure value is shown in the display. Thus very constant results may be achieved which are independent from a later seam process. In comparison to seamed ends the results differ by 0.3 to 0.8 upwards. Feature: *Industry Standard * suit any end of varying diameter * with piston supercharger, doubled the Pneumatic supply *Program Logic Control System (PLC) Controlled *LCD touch-screen Display *Rs-232 Communications Capability * Overload Protection *Test Point For Calibration *"speed of pressure increase" may be set *display the max. and min. measuring value and average after several test. Technical data (changes reserved): Measure range: 0-900 Kpa Resolution: 1 Kpa Rear Panel: RS232 serial output Power supply: 115/230V/50-60Hz Pneumatic supply: 5bar Max. can diameter: 80 mm Max. can height: 160 mm Dimensions: 520 x 460 x 750 (W x D x H ) Weight: 50 kg
|
|
» Machinery & Tools/Equipment |
|
|
|
[Sell] Canneed Flange width gauge |
|
|
The Canneed "FWG-100-d Flange width gauges" is designed to measure the flange width of open ended cans.The spring loaded can guides automatically position the can for fast, accurate, and repeatable measurements. Constructed of machined for corrosion resistance and long life. The base plate is stainless steel to extend the wear life of the surface. With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauges may be connected to a computer via a multiplexer. Technical data (changes reserved): Resolution: 0,01 mm Sample Capacity FWG-100-d: 50-90mm dia. FWG-200-d: 50-200mm dia. FWG-300-d: 50-300mm dia. bigger by order |
|
» Machinery & Tools/Equipment |
|
|
|
|
|
Pages: 1
|
|
|