|
|
Company Name: |
Liaoning Tianhe Fine Chemicals Co., Ltd |
Contact Person: |
sarah lee |
City: |
jin zhou |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
Tianhe Chemicals started business operation with the registered capital of 100 million yuan (RMB) since 1992. Tianhe Chemicals, on the strength of enterprising perseverance & concerted efforts, has developed into a conglomerate company who has research & development and production capability for providing multiple product lines and gets several hundred million dollars of sales revenue each year. Tianhe Chemicals has been the network supplier of PetroChina and Sinopec and the important project demonstration base designated by State Science Commission. In Jinzhou and the surrounding areas, there are four major independent production bases. Tianhe Chemicals has developed a wide range of products, including lubricating oil additives and fluoride products in more than 30 varieties. Several of them even fill up the gap in domestic production. The Company has made great contributions and achievements for the fine chemicals and fluoride industry. The fluorocarbon alcohol series developed by tianhe will bring revolutionary change to the company and even the rag trade and coating industry. The long-chain alkyl benzene sulphonate and salts thereof filled up the gap in domestic production and became a new generation of high-quality lubricant oil additives. Tianhe Chemicals, going overseas to bring in the foreign advanced technology and scientific management mode, gradually explores the integration of the corporate culture and establishes a set of sound high-tech management system in line with the China\'s national conditions. These are the advantages that ensure the company has always stood together the world\'s most advanced cutting-edge technologies, and promote China\'s fine chemical industry to flourish. Tianhe Company will reward the customers, society and country with the best products and service and pursue excellence with everlasting innovative spirit.
|
Business Type: |
Exporter, Manufacturer |
Areas of
Interest: |
1. Chemicals/Detergents & Cleaning 2. Chemicals/Organics 3. Chemicals/Other
|
|
|
|
Offers
From This Member (15) |
|
|
|
[Sell] T106B (TBN300) Long-Chain Linear Alkyl Benzene High Base |
|
|
Description T106B is prepared from long-chain (C20-24) linear alkylbenzene sulfonic acid. It can provide lubricants with excellent acid neutralizing ability, good detergency & dispersion effects and antirust property as well. Special features Good acid neutralizing ability Good detergency Fine hydrolytic stability Antifoam Antirust performance Applications Used for blending high grade engine oils and marine engine oils The dosage: 0.5-3.0% Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 1150 Flash point (COC), (ASTM D92), oC 180 Kinematic viscosity (100oC), (ASTM D445), mm2/s 40 TBN, (ASTM D2896), mgKOH/g 300 Ca, (ASTM D4951), m% 12.0 S, (ASTM D129), m% 1.36 The enterprise standard Q/JTH003-2007 Points for Attention It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet. |
|
» Chemicals/Organics |
|
|
|
[Sell] T115C (TBN300) High Base Sulfurized Calcium Alkylphenate lubricant additives |
|
|
Description T115C provides the engine oils with stronger acid neutralizing, better antioxidation, abrasion resistance and larger base number than the similar products. It also has excellent detergency & dispersion effects and anti-aqueous properties. Special features Large base number, good acid neutralizing ability Better antioxidation Fine hydrolytic stability High temperature detergency Abrasion resistance Applications Used for blending high grade and medium grade of engine oils, especially suitable for blending turbocharged diesel engine oils, to reduce carbon deposits on top area of engine piston The dosage: 0.5-4.0% Also blending for high base marine cylinder oils. The dosage: 25-35% Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 1150 Flash point (COC), (ASTM D92), oC 180 [1]Kinematic viscosity (100oC), (ASTM D445), mm2/s 210 TBN, (ASTM D2896), mgKOH/g 300 Ca, (ASTM D4951), m% 11.0 S, (ASTM D129), m% 2.9 The enterprise standard Q/JTH013-2008 Note[1]: The kinematic viscosities (100oC) of 140-350 mm2/s are available on request. Points for Attention It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet. |
|
» Chemicals/Organics |
|
|
|
[Sell] T154A Polyisobutylene Succinimide lubricant additives |
|
|
Description T154A is an ashless dispersant prepared from high reactive isobutylene (Mn=1000) by thermal adduction process. With better detergency capability, it can inhibit the carbon deposit and the formation of varnish. It doesn't contain chlorine. Special features Good detergency & dispersion effects Free of chlorine Applications Used for blending high grade diesel engine oils Used for blending high grade gasoline engine oils Used for blending marine cylinder oils for low-speed crosshead engine Particularly suitable for blending environment-friendly engine oils The dosage: 2.0-4.0% Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 920 Flash point (COC), (ASTM D92), oC 180 Kinematic viscosity (100oC), (ASTM D445), mm2/s 140 N, (ASTM D3228), m% 1.3 TBN, (ASTM D2896), mgKOH/g 20 The enterprise standard Q/JTH007-2007 Points for Attention It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
|
|
» Chemicals/Organics |
|
|
|
[Sell] T161A High Molecular Weight Polyisobutylene Succinimide lubricant additives |
|
|
Description T161A is a high molecular weight ashless dispersant prepared from high reactive isobutylene (Mn=2300) by thermal adduction process. It has excellent dispersion & solubility effect of oil sludge and soot; and can effectively control the increase in viscosity of engine oils. T161A doesn't contain chlorine. Special features Excellent low temperature dispersion of oil sludge Excellent soot dispersibility Good high temperature detergency Free of chlorine Applications Used for blending SG and higher quality gasoline engine oils Used for blending CF-4 and higher quality diesel engine oils Particularly suitable for blending environment-friendly engine oils The dosage: 2.0-5.0% Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 920 Flash point (COC), (ASTM D92), oC 180 Kinematic viscosity (100oC), (ASTM D445), mm2/s 350 N, (ASTM D3228), m% 1.0 TBN, (ASTM D2896), mgKOH/g 20 The enterprise standard Q/JTH007-2007 Points for Attention It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
|
|
» Chemicals/Organics |
|
|
|
[Sell] T202 Zinc Butyl Octyl Primary Alkyl Dithiophosphate lubricant additives |
|
|
Description T202 is a zinc thiophosphate, which is prepared from thiophosphoric acid made from butyl octyl alcohol. When added into oils, it can inhibit oil oxidation. It has antioxidation, antiwear and corrosion proof. The product is a multi-function additive with antioxidation and antiwear and anticorrosion. Special features Better antioxidation Better abrasion resistance Better thermal stability Applications Primarily used for various internal combustion engine oils Used for gear oils, hydraulic oils, bearing oils, rail oils and metalworking oils; but it can not be used with silver parts The dosage: 0.5-3.0% Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 1100 Flash point (COC), (ASTM D92), oC 180 S, (ASTM D129), m% 16.0 P, (ASTM D1091), m% 8.0 Zn, (ASTM D4927), m% 8.8 pH value, (SH/T0394, Affix A) 6.0 Executive standard: SH/T0394-1996 Points for Attention It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
|
|
» Chemicals/Organics |
|
|
|
[Sell] T321 Sulfurized Isobutylene lubricant additives |
|
|
Description T321 is an additive including sulfur prepared from sulfur or mono sulfur chloride and isobutylene. It provides the lubricants with extreme pressure and antiwear property, and can be widely used for blending gear oils, and industrial oils, etc. Special features Excellent extreme pressure abrasion resistance Fine oil solubility Lower copper carrosion Applications Used for blending various medium and high grade gear oils Used for blending antiwear hydraulic oils Used for blending cutting oils Used for blending lubricating grease The dosage: 1.5-5.0% Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 1150 Flash point (COC), (ASTM D92), oC 100 Kinematic viscosity (100oC), (ASTM D445), mm2/s 8.0 S, (ASTM D129), m% 44.0 Copper corrosion (121oC, 3h), (ASTM D130) 3 The enterprise standard Q/JTH001-2007 Points for Attention It is packed in metal drums of 200 litres. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet. |
|
» Chemicals/Organics |
|
|
|
[Sell] T501 2,6-Di-Tertiary Butyl Para-Cresol lubricant additives |
|
|
Description T501 is an oil additive component prepared from para-cresol and isobutylene. It provides oils with excellent antioxidation and antigum performance. Serve as a multifunctional antioxidant, this prodct is readily soluble in oils, but not soluble in water and caustic soda. Special features High purity, >99% Fine antioxidation and antigum performance Fine oil solubility Fine stability in storage White color Uniform grains Applications Used for fuel oils and paraffins Used for blending industrial oils such as turbine oils, transformer oils, hydraulic oils and machine-tool oils Used as anti-aging agent in the plastic and rubber Note: The service temperature should not exceed 100oC The dosage: 0.1-1.0% Characteristics Item Typical value Melting Point, (GB/T617), oC 69.5 Free Cresol, (SH/T0015, Affix A), m% 0.015 Water, (GB/T606), m% 0.05 Ash, (GB/T508), m% 0.01 Executive standard: SH/T0015-90 Packing and Handling It is packed in 25kg paper-plastic lamination bags. The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0015-90. The product should be stored in dry and sunlight-proof indoor warehouse, and should be underlaied with pads, so as not to be affected by damp. Prevent from rain and wetting, ensuring dry packing bag not to be damaged and polluted. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
|
|
» Chemicals/Other |
|
|
|
[Sell] T502A Mixture Liquid Hindered Phenol lubricant additives |
|
|
Description T502A is a lubricant additive component of mixture liquid hindered phenol. It provides oils with excellent antioxidation and antigum performance. It has good oil solubility. It is liquid at normal temperature. Special features Fine antioxidation and antigum performance Good oil solubility Liquid at normal temperature, with fine flowability Applications Used for fuel oils Used for blending industrial lubricating oils such as turbine oils, transformer oils, hydraulic oils and machine-tool oils, etc Used as anti-aging agent in rubber The dosage: 0.1-1.0% Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 930 Flash point (PMCC), (ASTM D93), oC 9.6 Kinematic viscosity (40oC), (ASTM D445), mm2/s 9.0 The enterprise standard Q/JTH002-2007 Points for Attention It is packed in metal drums of 200 litres. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
|
|
» Chemicals/Other |
|
|
|
[Sell] T809A Ester-Type Pour Point Depressant lubricant additives |
|
|
Description T809A is a copolymer of high carbon alcohol esters. When added into oils, it can effectively reduce the pour point of lubrication oils and improves its low temperature fluidity. It is a pour point depressant generally used for the lubricating oils. Special features Fine pour point depressing effect for paraffin-based oil. Add 0.5m% into HVI150SN base oil (the freezing point not higher than -15oC), the pour point depression will be more than 15 degrees Celsius. Applications Used for blending various low freezing point engine oils, machine oils and hydraulic oils The dosage: 0.1-0.5% Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 940 Flash point (COC), (ASTM D92), oC 170 Kinematic viscosity (100oC), (ASTM D445), mm2/s 290 Pour point depression*, (ASTM D97), oC 15.0 *The pour point depression is obtained when 0.5m% of this product is added into HVI 150SN base oil with a freezing point no higher than -15oC. The enterprise standard Q/JTH008-2007 Points for Attention It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
|
|
» Chemicals/Other |
|
|
|
[Sell] TH3159 Additive Package for Diesel Engine Oil lubricant additives |
|
|
Description TH3159 is formulated with detergent, dispersant, antioxidant/corrosion inhibitor, ashless antioxidant and antiwear agent, etc. The diesel engine oil blended with this package can largely reduce carbon deposition on engine piston and cylinder wear, and has excellent performance in soot dispersing, antioxidation, corrosion proof and antiwear. It can effectively protect the engine and prolong the engine service life. Applications API grade Treating rate (m%) Mono-grade Multi-grade CF-4 7.7 8.5 Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/30, 15W/40 internal combustion engine oils blended with GroupⅠand GroupⅡbase oil, and the quality complies with API standard. Characteristics Item Typical value Test method Kinematic viscosity (100oC), mm2/s 60 ASTM D445 Flash point (COC), oC 170 ASTM D92 Density (20oC), kg/m3 Report ASTM D1298 TBN, mgKOH/g 110 ASTM D2896 N , m% 0.4 ASTM D3228 Zn, m% 1.01 ASTM D4927 P, m% 0.86 ASTM D1091 Ca, m% 3.8 ASTM D4927 B, m% 0.12 ASTM D4951 Mechanical impurities, m% 0.09 GB/T511 Packing,Transportation and Storage 1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer. 2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden. 3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0164. Points for Attention 1, The package is a kind of functional additive package, applied by adding with antifoam agent. 2, The recommended temperature for blending of oil is 60-65oC. 3, The temperature of heating steam for transferring and blending should not exceed 110oC.
|
|
» Chemicals/Other |
|
|
|
[Sell] TH3258 Additive Package for Universal Engine Oil lubricant additives |
|
|
Description TH3258 is a universal engine oil additive package prepared from a variety of additives such as high grade detergent, dispersant and high performance ashless antioxidant, etc. It can provide lubricant with favorable high temperature dispersibility and fine antioxidation performance. Applications API grade Treating rate (m%) Mono-grade Multi-grade SF/CF 4.7+1.6 T106 4.9+1.8 T106 SF/CD 4.7 5.1 SE/CD 4.7 4.9 SE/CD 4.3 4.5 SE/CC 4.0 4.3 SD/CC 3.5 3.8 SC/CC 2.2 2.5 Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/30, 15W/40 internal combustion engine oils blended with Group Ⅰ and Group Ⅱ base oil, and the quality complies with API standard. Characteristics Item Typical value Test method Appearence Dark brown thick liquid Visual inspection Density (20oC), kg/m3 Report ASTM D1298 Flash point (COC), oC 170 ASTM D92 Kinematic viscosity (100oC), mm2/s 61.23 ASTM D445 TBN, mgKOH/g 121 ASTM D2896 Zn, m% 2.53 ASTM D4927 P, m% 2.16 ASTM D1091 Ca, m% 4.12 ASTM D4927 Mechanical impurities, m% 0.1 GB/T511 Packing,Transportation and Storage 1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer. 2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden. 3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0164. Points for Attention 1, The package is a kind of functional additive package, applied by adding with antifoam agent. 2, The recommended temperature for blending of oil is 60-65oC. 3, The temperature of heating steam for transferring and blending should not exceed 110oC.
|
|
» Chemicals/Other |
|
|
|
[Sell] TH4201 Additive Package for UnIversal Gear Oil lubricant additives |
|
|
Description TH4201 is formulated with a variety of additives such as extreme pressure agent and antioxidant, etc. It has excellent extreme pressure antiwear property, antirust and corrosion inhibition, and oxidation stability property, serves as a multiple functionaladditive package for universal gear oils. It works effectively to prevent gear surface from scuffing, abrasion, pitting and spalling under harsh conditions like speedy impact and high torque; and keeps rust and corrosion away from the gear surface. Applications Performance grade Treating rate (m%) CKC 1.2 CKD 1.6 GL-4 2.4 GL-5 4.8 Above treating rates are calculated by addition method. This product is applicable for the preparation of the gear oils of SAE90, 80W/90, 85W/90, 85W/140 blended with Group I and Group II gear oils. The qualities of the blended CKC and CKD comply with GB 5903 standard. The quality of the blended GL-4 is up to Q/SH011-066-96 standard and that of the blended GL-5 up to GB 13859 standard. Characteristics Item Typical value Test method Density (20oC), kg/m3 Report ASTM D1298 Flash point (COC), oC 100 ASTM D92 Kinematic viscosity (100oC), mm2/s 5.8 ASTM D445 P, m% 1.8 ASTM D1091 S, m% 29.2 ASTM D129 N, m% 0.4 GB/T3228 Mechanical impurities, m% 0.1 GB/T511 Packing,Transportation and Storage 1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer. 2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden. 3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0164. Points for Attention 1, The package is a kind of functional additive package, applied by adding with antifoam agent. 2, The recommended temperature for blending of oil is 60-65oC. 3, The temperature of heating steam for transferring and blending should be 65-70oC.
|
|
» Chemicals/Other |
|
|
|
[Sell] T2001 Long-chain Linear Alkyl Benzenesulfonic Acid lubricant additives |
|
|
Description T2001 is a lubricant additive intermediate prepared from long-chain linear alpha-olefin (C20-24). It is the raw material of high-quality sulphonates for preparation of high quality engine oil. Special features High sulfonic acid content: ≥85% Molecular weight (Mn): ≥480 Free acid and low water content Substituent: long chain(C20-24) linear structure Major composition: monoalkyl benzenesulfonic acid, ≥85% Applications Apply to various premium sulphonates for production of lubricants: •Low base, medium base and high base long-chain linear alkyl calcium sulfonate; •Overbased long-chain linear alkyl benzenemagnesium sulfonate; •Overbased long-chain linear sodium alkyl benzenesulfonate The sulphonate dertergents prepared from this product possess excellent thermal stability, oil solubility, detergency, hydraulic stability and defoaming property, except for the differed acid neutralizing abilities for various products. Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 960 Sulfonic acid content, (Q/JTH011, Affix A), m% 85 TAN, (ASTM D974), mgKOH/g 105 Free acid, (Q/JTH011, Affix A), m% 0.5 The enterprise standard Q/JTH011-2008 Packing and Handling It is packed in 200 litre plastic drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
|
|
» Chemicals/Other |
|
|
|
[Sell] T2007A Polyisobutylene Succinic Anhydride (Thermal Adduction PIBSA) lubricant additives |
|
|
Description T2007A is a lubricant additive intermediate prepared from high reactive polyisobutylene (Mn=1000) by thermal adduction process. The ashless dispersant produced from T2007A possesses fine detergency and favourable low temperature sludge dispersion. Special features Free of chlorine Applications Used for preparation of polyisobutylene diene and polyene succinimide and bononize ashless dispersant Used for preparation of emulsifying agents for emulsion explosives Used for preparation of processing aids for petroleum chemical plant Characteristics Item Typical value Density (20oC), (ASTM D1298), kg/m3 950 Flash point (COC), (ASTM D92), oC 180 Kinematic viscosity (100oC), (ASTM D445), mm2/s 800 TAN, (Q/JTH012, Affix A), mgKOH/g 110 The enterprise standard Q/JTH012-2008 Packing and Handling It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
|
|
» Chemicals/Other |
|
|
|
[Sell] LUBRICANT ADDITIVE |
|
|
LUBRICANT ADDITIVE COMPONENTS T104A (TBN25) Low Base Synthetic Alkyl Benzene Calcium Sulfonate T106A (TBN 300) High Base Linear Alkyl Benzene Synthetic Calcium Sulfonate T106A Low Chlorine Type (TBN 300) High Base Linear Alkyl Benzene Synthetic Calcium Sulfonate T106B (TBN300) Long-Chain Linear Alkyl Benzene High Base Synthetic Calcium Sulfonate T106B Low Chlorine Type (TBN300) Long-Chain Linear Alkyl Benzene High Base Synthetic Calcium Sulfonate T106D (TBN400) Long-Chain Linear Alkyl Benzene High Base Synthetic Calcium Sulfonate T106D Low Chlorine Type (TBN400) Long-Chain Linear Alkyl Benzene High Base Synthetic Calcium Sulfonate T107 (TBN400) Long-Chain Linear Alkyl Benzene High Base Synthetic Magnesium Sulfonate T115B (TBN250) High Base Sulfurized Calcium Alkylphenate T115C (TBN300) High Base Sulfurized Calcium Alkylphenate T151A Polyisobutylene Succinimide T154A Polyisobutylene Succinimide T154B Boronized Polyisobutylene Succinimide T161A High Molecular Weight Polyisobutylene Succinimide T161B Boronized High Molecular Weight Polyisobutylene Succinimide T164A High Molecular Weight Polyisobutylene Succinimide T165A High Molecular Weight Polyisobutylene Succinimide T202 Zinc Butyl Octyl Primary Alkyl Dithiophosphate T203 Zinc Dioctyl Primary Alkyl Dithiophosphate T204 Alkali-Type Zinc Dioctyl Primary Dialkyl Dithiophosphate T205 Zinc Propyl Octyl Primary-Secondary Dialkyl Dithiophosphate T206 Zinc Primary-Secondary Alkyl Dithiophosphate T207 Zinc Octyl Primary-Secondary Alkyl Dithiophosphate T321 Sulfurized Isobutylene 2,6-Di-Tertiary Butyl Para-Cresol (BHT)(Food Grade) T501 2,6-Di-Tertiary Butyl Para-Cresol T502 Mixture Liquid Hindered Phenol T502A Mixture Liquid Hindered Phenol T504 Sulfurized Alkylphenol Liquid Antioxidant T508 Phenolic Ester Antioxidant T557 Octyl/Butyl Diphenylamine T558 Dinonyl Diphenylamine T809A Ester-Type Pour Point Depressant T809B Ester-Type Pour Point Depressant Description LUBRICANT ADDITIVE PACKAGE TH3056 Additive Package for Gasoline Engine Oil TH3058 Additive Package for Four Stroke Motorcycle Engine Oil TH3152 Additive Package for Diesel Engine Oil TH3156 Additive Package for Diesel Engine Oil TH3159 Additive Package for Diesel Engine Oil TH3256 Additive Package for Universal Engine Oil TH3257 Additive Package for Universal Engine Oil TH3258 Additive Package for Universal Engine Oil TH3318 Additive Package for Dual Fuel Engine Oil TH3328 Additive Package for Two Stroke Motorcycle Oil TH3412 Additive Package for Railroad Engine Oil(Ⅲ Generation) TH4201 Additive Package for UnIversal Gear Oil TH4209 Additive Package for UnIversal Gear Oil TH4301 Additive Package for Worm Gear & Worm Oil TH5003 Additive Package for Antioxidant & Antirust Hydraulic Oil TH5022 Additive Package for Antiwear Hydraulic Oils TH5033 Additive Package for Ashless High Pressure Antiwear Hydraulic Oil TH5034 Additive Package for Hydraulic Rail Oil TH5035 Additive Package for Rail Oil TH5036 Additive Package for High temperature Chain Oil TH6002 Additive Package for Turbine Oil TH6003 Additive Package for Turbine Oil TH6022 Additive Package for Compressor Oil TH6042 Additive Package for Transfer Oil TH6061 Additive Package for Quenching Oil TH6081 Additive Package for Transformer Oil LUBRICANT ADDITIVE INTERMEDIATE T2001 Long-chain Linear Alkyl Benzenesulfonic Acid T2001A Synthetic Dialkyl Benzenesulfonic Acid T2002 Butyl Octane Primary Phosphorodithioic Acid T2003 Dioctane Primary Phosphorodithioic Acid T2004 Primary-Secondary Octane Phosphorodithioic Acid T2005 Propyl Octane Primary-Secondary Phosphorodithioic Acid T2007A Polyisobutylene Succinic Anhydride (Thermal Adduction PIBSA) T2007A-1 Polyisobutylene Succinic Anhydride(Thermal Adduction PIBSA Concentrate) T2007B Polyisobutylene Succinic Anhydride(Thermal Adduction PIBSA) T2007B-1 Polyisobutylene Succinic Anhydride(Thermal Adduction PIBSA Concentrate) T2007B-2 Polyiso |
|
» Chemicals/Other |
|
|
|
|
|
Pages: 1
|
|
|
|