|
|
|
Company Name: |
Hong kong Hong Ye Limited |
| Contact Person: |
jack lee |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Shen Zhen Hong Ye Jie Technology Co., Ltd. & Shen Zhen Hong Ye Silicon Rubber Plant was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and marketing of silicone rubber. It set up Hong Kong Hongye Ltd. and some other affiliated enterprises in 2005. |
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Chemicals/Organics
2. Chemicals/Rubber
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] pad printing silicon rubber |
 |
|
1.pad printing silicone rubber applications
pad printing silicone rubber is mainly used for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicone pad printing is a carrier which transfers printing the patterns from the steel plate onto the toys products surface.
2.pad printing silicone rubber features description
Pad printing silicone rubber has good printing effect, fine quality, permanent and durable, good resilience, abrasion resistance, and without any impurities, we can provide all kinds of colors and our catalyst is free charged.
3.pad printing operation silicone rubber instructions
The hardness of the pad printing silicone rubber is according to the size of the pattern which you want to print. the normal hardness of the silicone pad is 15A-25A, The general proportion between the silicon rubber and the silicone oil is 100:30-100:50,After you take the correct proportion of the mixture ,mix them evenly and sufficiently ,then add curing agent which are 2%-3%of the total weight of the silicon rubber and the silicone oil, keep stirring for 2 to 3 min……
Any more information, please feel free to contact Jack Lee
Mobile: 0086-13249396798
Tel: 0086-755-89948013
Email: hyk(at)szrl(dot)net
Fax: 0086-755-89948030
MSN: msn1916(at)live(dot)cn
Skype: Jack lee727
www(at)szrl(dot)net
HONG YE JIE TECHNOLOGY CO.LTD
|
|
| » Chemicals/Organics |
|
|
|
[Sell] manual mold silicon rubber |
|
|
manual mold silicone rubber applications
1.manual mold silicone rubber applications
Manual Mold silicon rubber silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds,low melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
2.manual mold silicone rubber features description
manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, high temperature resistance and time of reproduction determined on the basis of customers.
3.manual mold silicone rubber operations
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.
(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.)
Frequently asked questions of manual mold Silicon rubber
1.What should we do when the air bubbles appeared in the process of making manual mold silicone rubber ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to de-air. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-cross linking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.
Any more information, please feel free to contact Jack Lee
Mobile: 0086-13249396798
Tel: 0086-755-89948013
E-mail: hyk(at)szrl(dot)net
Fax: 0086-755-89948030
MSN: msn1916@live.cn
Skype: Jack Lee727
www(at)szrl(dot)net
HONG YE JIE TECHNOLOGY CO.LTD
|
|
| » Chemicals/Organics |
|
|
|
[Sell] molding silicon rubber |
|
|
Mold making silicone rubber
1.Mold making silicone rubber applications
Mold making silicone rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy,stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
2.Mold making silicone rubber features description
Mold making silicone rubber is white or red flowing liquid with general hardness of 22-50Aoafter curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with easy operation, non-deformation, high-temperature resistance, acid-alkali resistance and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
3.Advantage of mold making silicone rubber
Mold making silicone rubber is a kind of liquid with good fluidity, fast curing speed, high tearing strength elongation, high tear strength.
4.Features of mold making silicone rubber
RTV-2 mold making silicone rubber are generally named two -component room temperature vulcanization silicone rubber, a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion.
5.Mold making silicone rubber operations
If the customer wants to make large products and large size molds, the mold should be made of mold making silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of mold making silicon rubber with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould , more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add any silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
Any more information, please feel free to contact Jack Lee
Mobile: 0086-13249396798
Tel: 0086-755-89948013
E-mail: hyk(at)szrl(dot)net
Fax: 0086-755-89948030
MSN: msn1916(at)live(dot)cn
Skype:Jack Lee727
www(at)szrl(dot)net
|
|
| » Chemicals/Organics |
|
|
|
|
|
Pages: 1
|
|
|
|
|
