|
|
Company Name: |
China abrasives import & export corporation |
Contact Person: |
Mr. Lin Yu |
City: |
Zhengzhou |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
At first, China Abrasives Import & Export Corporation (CAEC) was set up in 1981 as the largest state-owned corporation that specialized in abrasives and abrasive products in China. After nearly 30 years, it has developed into a conglomerate corporation that dabbling in abrasives, refractories, chemicals, minerals, metals, machineries, as well as processing trade, exports and imports complete sets of equipment and technologies. CAEC is composed of two subsidiary companies, four stock-owned companies and four I/E business departments, has a professional, capable and efficient team which consists of Senior Engineer 21%, Engineer 64% and Assistant Engineer 15%. CAEC also has hundreds of cooperative suppliers and scientific research institutes. Now, CAEC is the Chairman of China Abrasives Association, the Chairman of Artificial Corundum Branch and the Chairman of Sic Branch of China Chamber of Commerce of Metals Minerals & Chemicals Importers & Exporters. The China National Machinery Industry Corporation (SINOMACH), to which CAEC is subordinated, was established in January 1971 with approval of the State Council. SINOMACH is a large scale, state-owned enterprise group under the supervision of the State Assets Supervision and Administration Commission. Its service covers a wide range of key national economic sectors including industry, agriculture, communication and transportation, energy, building, light industries, automobile, ship- building, mining, metallurgy and aerospace industries. For years, SINOMACH has sustained over 30% annual growth, with main business revenue reaching 15 billion US$ in 2009. As a world famous international project contractor, SINOMACH was ranked No. 28 among the Top 225 Global Contractors and No. 77 among the Top 200 International Design Firms by ENR in 2009. All these can guarantee that CAEC provides the best quality products and best services to the customers. So far, CAEC has established business relations with foreign companies from more than 100 countries. |
Business Type: |
Exporter, Manufacturer |
Areas of
Interest: |
1. Machinery & Tools/Equipment 2. Machinery & Tools/Machinery 3. Machinery & Tools/Parts 4. Chemicals/Equipment 5. Raw Materials/Mines & Minerals
|
|
|
|
Offers
From This Member (20) |
|
|
|
[Sell] Alumina-zirconia abrasive |
|
|
Our alumina-zirconia abrasive is produced by smelting the mixture of alumina and zirconia. It has two types, AZ 40 (Zirconia 40%) and AZ 25 (Zirconia 25%). It has excellent performances such as High toughness, good durability and well heat resistant. It is widely used to make Heavy Duty Grinding Wheel for grinding the stainless steel slab and special steel slab during steel making. Applications: Bonded abrasives, coated abrasives, blasting. Typical Chemical Analysis: AZ 25: Al2O3 68-72%, ZrO2 24-30%, TiO2 < 1.0%, SiO2 < 0.5%, Fe2O3 < 0.5%; AZ 40: Al2O3 55-57%, ZrO2 38-44%, TiO2 < 1.0%, SiO2 < 0.5%, Fe2O3 < 0.5%. Other chemical content can be adjusted according to customer's demands. |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Nitride bonded silicon carbide thermalcouple protection tube |
|
|
Our product is designed for smelting or casting of molten aluminum, aluminium alloys, magnesium alloys, copper alloys, lead and zinc. a. Excellent thermal conductivity; b. High washing resistance, oxidation resistance; c. Good thermal shock resistance; d. Low wettability with the melts; e. High cost performance, long service life. Also we can supply Al2O3 and Si3N4 (SSN, RBSN, G.P.S-SN, HPSN) based tubes. Please contact us if interested. Available Size & Types: OD max: Φ150 mm, L max: 1700 mm. Typical chemical analysis: SiC: > 75.00%; Si3N4: >22.00%; Free-Si: < 0.20%; Fe2O3: < 0.15%. Typical Technical Data: Porosity: < 16%; Bulk Density: > 2.55 g/cm3; Compressive Strength: > 140 MPa; Flexural Strength: > 45 MPa; Thermal Conductivity (1200℃): > 17.5 × 10-6 W/ (m?℃); Thermal Expansion (20℃-1200℃): < 4.5 × 10-6 /℃. |
|
» Machinery & Tools/Parts |
|
|
|
[Sell] Sedimentation agent for silicon carbide (SiC) micro-powder |
|
|
Our sedimentation agent is only specialized for the silicon carbide micro-powder which has a maximum particle size of 10 μm. It is a kind of non-smelly, non-toxic and non-corrosive liquid with light yellow color. It can effectively prevent such micro powders from being washed away in the acid-washing process by accelerating the sedimentation. And the sedimentation rate of the powder is about 2 cm per second. It is alkalescent and can only be used in the acid suspension that pH value is higher than 4. Also a higher than 10 °C temperature of the suspension is recommended so as to assure the activity of the agent. Typical use amount: Add 1kg sedimentation agent into per 10 tons suspension r which contains more than 0.20% SiC. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Silicon carbide (SiC) powder |
|
|
China Abrasives Import & Export Corporation is the Chairman of China Abrasives Association, the Chairman of Artificial Corundum Branch and the Chairman of SiC Branch of China Chamber of Commerce of Metals Minerals & Chemicals Importers & Exporters. We can provide SiC grit, micro-powder, nano crystalline powder and whisker. What can offer are listed below: Grit and powder: Green SiC powder for re-crystallized applications; Green SiC micro powder for polishing applications; Green SiC micro powder for wire sawing applications; Green SiC powder for reaction bonded applications; Green SiC powder for sintered applications; Black SiC for refractory applications; Green SiC powder for diesel particulate filters (DPF); SiC for abrasive applications; SiC for metallurgical applications; Nano crystalline SiC power and whisker. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Silicon carbide corrugated brick for zinc smelting |
|
|
Our Corrugated tile is designed to replace traditional square SiC brick in zinc smelting furnace especially the vertical retorting furnace. It has larger surface area when compared with quadrel of the same size. Its excellent performance includes: a. Efficiently enlarge the thermal radiation area, accelerate the thermal exchange and speed up the chemical reaction which can effectively save power; b. High strength, good anti-washing resistance and high oxidation resistance lead to long service life; c. More importantly, increase production and reduce the cost. Available Size: Length: 230-1000 mm; width: 110-300 mm; thickness: 65-200 mm. Or according to clients’ demands. Applications: Zinc vertical distillation furnace, electric furnace, airheater. Typical Technical Parameter: SiC: > 85%; Porosity: < 13%; Volume Density: > 2.65 g/cm3; Thermal Conductivity: > 15.5 W/ (m.K); Compressive Strength (bluk): > 205 MPa; Flexural Strength (bulk): > 50 MPa; Working Temperature: 1000-1400 °C. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Clay bonded silicon carbide tower tray (plate) for zinc smelting |
|
|
Our tower tray is designed with excellent performance including high strength, good anti-washing resistance of molten zinc, high oxidation resistance and long service life. Available Size: 990 mm × 457 mm × 165 mm, 1260 mm × 620 mm × 180 mm, 1372 mm × 762 mm × 180 mm, or according to clients’ demands. Applications: Designed for zinc vertical retorting. Typical Technical Parameter: SiC: > 90%; Porosity: < 12%; Volume Density: > 2.7 g/cm3; Thermal Conductivity: > 15.5 W/ (m?K); Compressive Strength: > 195 MPa; Flexural Strength: > 40 MPa; Working Temperature: 1000-1400 °C. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Nitride bonded silicon carbide (NBSC) rotor for zinc smelting |
|
|
Our NBSC rotor is designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good anti-washing resistance of molten zinc, high condensation efficiency and long service life. Available Size: Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm; Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm. Or according to clients’ demands. Applications: Rotor for splash condenser in electric zinc furnace or vertical retorting furnace. Typical Chemical Analysis: SiC: > 80.00%; Si3N4: > 15.00%; Free-Si: < 0.20%; Fe2O3: < 0.20%. Typical Technical Data: Porosity: < 15%; Volume Density: > 2.70 g/cm3; Compressive Strength: > 120 MPa; Degassing Efficiency: > 50%; Revolutions: 300-750 rpm; Working Temperature: 1000-1400 °C; Service Life: > 50 days. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Smelting furnace used for brown aluminum oxide |
|
|
China abrasives import & export corporation (CAEC) is China's leading company in the market of BFA. It is a state-owned company subordinated to China National Machinery Industry Corporation (SINOMACH) which is the nation's largest corporation in machinery industry. We have experience in designing various furnaces used for smelting BFA for many Chinese companies. Our proper design of the product line can greatly save the cost. The technical advantages of our product are listed below. a. High conversion of the raw materials, low materials waste; b. Low power consumption; c. Well wiring design, high safety; d. Easy to operate, less operators, , high working efficiency; e. Novel cooling system, long furnace service life; f. Special dust collection system, low environment pollution. Available Capacity: Fixed furnace: 5000 kVA, 4000 kVA, 3600 kVA, 1800 kVA; Tilting furnace: 10000 kVA, 7500 kVA, 6300 kVA, 5000 kVA, 4000 kVA, 3000 kVA; Or according to clients' demands. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] upcast equipment for copper alloy and oxygen free copper |
|
|
Our company is wholly-owned by China National Machinery Industry Corporation (SINOMACH) which is China's largest corporation that specialized in complete equipment design and manufacture. Our product for upward (and horizontal) casting of copper alloys and OFC is the most advanced and efficient in China market. In the passed 20 years, we have provide Vietnam, Brazil, Iron, Thailand and South Korea with more than 200 sets of equipment for copper rod (Ф8-30 mm), belt (width 170-300 mm, thickness 0.6-4.5 mm) and pipe (horizontal casting). 1. Equipment type: OFCE-1; 2. Annual capacity: 1000-15000 ton; 3. Annual working time: 300 days; 4. Furnace type: Single furnace, Double furnace: smelting furnace ×1, keeping furnace ×1, Triple furnace: smelting furnace ×2, keeping furnace ×1; 5. Power consumption in smelting copper: <335 kWh/ton; 6. Number of casting strands: 4-24; 7. Casting rod diameter: Ф8-30 mm; 8. Casting speed: 200-3200 mm/minute; 9. Upward pitch: 1-5 mm; 10. Casting rod clamping method: cylinder type; 11. Liquid tracking precision: ±1 mm; 12. Coil diameter: Ф 600-1800 mm; 13. Coil weight: 2-5 ton; 14. Coiling mode: full automatic; 15. Cathode charging: whole piece, automatic; 16. Console interface: big screens can display data intuitively, touch screen combined with mechanical press buttons can reduce misoperation efficiently, automatic date saving can make your supervision of the process conveniently. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Graphite molds for copper continuous casting |
|
|
Our company is wholly-owned by China National Machinery Industry Corporation (SINOMACH) which is the largest Chinese company that specialized in complete equipment design and manufacture. Besides whole set upward (and horizontal) casting equipments, we can also provide the components for the equipment. For upward casting equipment, the components that we can provide are listed here. Furnaces and refractory bricks; crystallizer parts; graphite die moulds and protection kits; thermocouples and protection tubes; floats for liquid level tracking; aluminum silicate blankets and inner linings; molten channel; rod roller; Calcium Hexaboride and flake graphite. Of course, we can offer products for casting process of steel, stainless steel, gold and other non-ferrous. All these products mentioned here can be customized. The following are the information of our graphite die moulds for copper continuous casting. Available Type and Size: For rod: Ф8-30 mm; For pipe (horizontal casting): OD max Ф35 mm; For belt: width 170-300 mm, thickness 0.6-4.5 mm. Typical Chemical Analysis: F.C.: > 99.99%; Ash content: < 0.01%; Density: > 1.90 g/cm3; Porosity: < 15%; Average Pore Size: 2.2 mm; Electric Strength: > 9.0 Ωmm2/m; Flexural Strength: > 45 MPa; Compressive Strength: > 90 MPa; Thermal Expansion Coefficient: < 4.5×10-4 m/K. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Calcium hexaboride (CaB6) powders |
|
|
Available Size: -20#, 20-60#, 20-80#, 60-150#, -100#, -200#, -325#, -400#. Applications: a. Antioxidant for MgO-C bricks; b. Deoxidizing agent for copper melts especially for OFC production; c. Wear protection material; d. Neutron radiation prevention material; e. Addiction for boron steel; f. Raw material of TiB2, ZrB2, HfB2, BCl3 and amorphous boron; g. Raw material of Ni-B, Co-B and Cu-B; h. Raw material of CBN; i. New type semi-conductor material. Typical Chemical Analysis: a. B: 58-55%, Ca: 31-33%, C < 6%; b. B: 53-50%, Ca: 32-30%, C < 8%; c. B: 49-46%, Ca: 29-27%, C < 8%. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] sg abrasives(Ceramic aluminum oxide,Ceramic alumina) |
|
|
Our CA abrasive is prepared by a novel sol-gel process. The abrasive grit has a super microcrystal structure which consists of billions of grains that at the scale of 5 to 300 nanometers. With enhanced fracture toughness and hardness of the grain, our CA abrasive shows excellent performance when made into grinding wheel and cutting wheel. The advantages of our CA abrasive are listed below: a. Sharp grain shape and good self-sharpening bring efficient grinding and fast cutting; b. High toughness and low abrasion loss lead to long service life; c. High cost performance makes it the best substitute of WA and CBN abrasives. Practical application and testing results indicate that our product exhibits better effects when compared with some similar foreign products. Also, we can provide CA grinding wheels and cutting wheels. Please contact us if interested. Available size: 36#, 46#, 60#, 80#, 100#, 120#, 150#, 180#, 220#, 240#, 280#, 320#. Applications: Grinding wheels, belts, papers and cutting wheels of nickel based alloy, tool steel, carbon steel, low carbon steel, gray iron, cast iron, malleable iron, bronze, brass, magnesium alloy, aluminium alloy. Typical technical data: Chemical composition: Al2O3 > 99.20%, Fe2O3 < 0.05%, SiO2 < 0.30%, Na2O < 0.25%; Grain size: < 300 nm; Density: > 3.90 g/cm3. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Brown aluminum oxide(brown fused alumina) |
|
|
We can supply various BFA products: Fixed furnace sand, tilting furnace sand; Normal sand, calcined sand, coated sand; Bamac sand, ball milling sand, crushing mill sand; Water washed sand, acid washed sand. For ceramic bonded wheels: 12# - 240# Al2O3 > 93.50%, Fe2O3 < 0.25%, SiO2 < 1.00%, TiO2 < 2.50% For resin wheels: 12# - 240# Al2O3 > 93.50%, Fe2O3 < 0.30%, SiO2 < 1.20%, TiO2 < 2.50% For coated abrasives: P22# - P240# Al2O3 > 91.50%, Fe2O3 < 0.50%, SiO2 < 1.50%, TiO2 < 2.50% For refractories: 180# - 0, 200# - 0, 320# -0, 0-0.5 mm, 0-1 mm, 1-3 mm, 3-5 mm, 5-8 mm, 8-10 mm, 8-12 mm, 10-25 mm, 0-20 mm, 0-25 mm, 0-30 mm, 0-50 mm Al2O3 > 95.50%, Fe2O3 < 0.30%, SiO2 < 0.30%, TiO2 < 2.50% For sand blasting: 16#, 24#, 30#, 46#, 60#, 80#, 120#, 150#, 180#, 200#, 220#, 280# Al2O3 > 85.50%, Fe2O3 < 0.30%, SiO2 < 1.50%, TiO2 < 2.50% For floor construction: 14#, 24#, 30#, 36#, 46#, 60#, 80#, 100#, 120#,1-2 mm, 1-3 mm Al2O3 > 85.00%, Fe2O3 < 2.00%, SiO2 < 3.00%, TiO2 < 4.00% For polishing: JIS#240 - JIS#4000 Al2O3 > 96.50%, Fe2O3 < 0.35%, SiO2 < 0.80%, TiO2 < 2.00% For precision molding: F60-F120 Al2O3 > 93.50%, Fe2O3 < 0.30%, SiO2 < 1.50%, TiO2 < 2.00% If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Black aluminum oxide (black fused alumina) powder |
|
|
China Abrasives Import & Export Corporation is the Chairman of China Abrasives Association, the Chairman of Artificial Corundum Branch and the Chairman of SiC Branch of China Chamber of Commerce of Metals Minerals & Chemicals Importers & Exporters. We can provide BA grit and micro-powder. What we can offer are listed below: Black fused alumina (BA, black corundum) bulk 10-20 mm, 10-30 mm, 10-50 mm, 20-50 mm. Black fused alumina (BA, black corundum) for sand blasting 46#, 60#, 80#. Black fused alumina (BA, black corundum) for grinding wheels and cut-offs 24#, 30#, 36#, 46#, 60#, 80#, 100#, 120#. Black fused alumina (BA, black corundum) as aggregate for road construction 1-2 mm, 1-3 mm. Black fused alumina (BA, black corundum) for polishing wheels 80#, 110#, 150#, 200#. Black fused alumina (BA, black corundum) for finishing and polishing-soaps 320#, 400#, 600#, 800#, 1000#. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com. |
|
» Raw Materials/Other |
|
|
|
[Sell] Aluminum titanate stalk (riser) tube and dosing tube |
|
|
Our aluminum titanate ceramic stalk tube (or riser tube) is designed for die casting of molten aluminum, aluminium alloys, magnesium alloys and copper alloys. The advantages of our product are listed below: a. High melting point; b. Excellent thermal conductivity, low thermal expansion; c. High washing resistance and thermal shock resistance; d. Low wettability with the melts; e. High cost performance, long service life. Also we can supply stalk (riser) tubes made of other materials or by different process, for example, Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), nitride bonded SiC, O’-SiAlON, dense fused silica and coated cast iron. Please contact us if interested. Available Size and Types: ID max: Φ200 mm, Length max: 1700 mm; Metal flange type or one body type. Applications: Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys. Typical Technical Data: Porosity: < 6.5%; Bulk Density: > 3.20 g/cm3; Flexural Strength: > 50 MPa; Thermal Conductivity (600-800 °C): > 0.5 × 10-6 W/ (m?°C); Thermal Expansion (800 °C): < 0.80 × 10-6/ °C. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Nitride bonded silicon carbide stalk (riser) tube |
|
|
Our NBSC stalk tube (or riser tube) is designed for die casting of molten aluminum, aluminium alloys, magnesium alloys and copper alloys. As replacement of cast iron and old ceramic ones, our product has some exceptional features as follows: a. High density, high mechanical strength; b. Excellent thermal conductivity, low thermal expansion; c. High washing resistance, oxidation resistance, acid resistance and thermal shock resistance; d. Low wettability with the melts, bring minimum impurities to the melts; e. High cost performance, long service life. Also we can supply stalk (riser) tubes made of other materials or by different process, for example, Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), O’-SiAlON, aluminum titanate, dense fused silica and coated cast iron. Please contact us if interested. Available Size & Types: ID max: Φ220 mm; Length max: 1700 mm; Metal flange type or one body type. Applications: Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys. Typical chemical analysis: SiC: > 70.00%; Si3N4: >20.00%; Free-Si: < 0.20%; Fe2O3: < 0.15%. Typical Technical Data: Porosity: < 11%; Bulk Density: > 2.65 g/cm3; Compressive Strength: > 175 MPa; Flexural Strength: > 70 MPa; Thermal Conductivity (1400 °C): > 16.5 × 10-6 W/ (m?°C); Thermal Expansion (20-1400 °C): < 4.6 × 10-6/ °C; Maximum Working Temperature: 1550 °C. If you are intreasted about our products, please feel free to write to me: alleninbiz(a)gmail.com.
|
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Nitride bonded silicon carbide heater protection tube |
|
|
Our product is designed for smelting or casting of molten aluminum, aluminium alloys, magnesium alloys, zinc and copper alloys. a. High density, high mechanical strength; b. Excellent thermal conductivity, low thermal expansion; c. High washing resistance, oxidation resistance, acid resistance and thermal shock resistance; d. Low wettability with the melts, bring minimum impurities to the melts; e. High cost performance, long service life. Also we can supply Si3N4 (SSN, RBSN, G.P.S-SN, HPSN), O’-SiAlON tubes. Please contact us if interested. Available Size & Types: ID max: Φ220 mm, Length max: 1700 mm; Vertical type (metal flange type, one body type), horizontal type and pencile type. Applications: Low pressure die casting and counter pressure die casting of molten aluminum, aluminum alloys, magnesium alloys and copper alloys; zinc smelting. Typical chemical analysis: SiC: > 72.00%; Si3N4: >25.00%; Free-Si: < 0.20%; Fe2O3: < 0.15%. Typical Technical Data: Porosity: < 11%; Bulk Density: > 2.60 g/cm3; Compressive Strength: > 175 MPa; Flexural Strength: > 70 MPa; Thermal Conductivity (1400 °C): > 16.5 × 10-6 W/ (m?°C); Thermal Expansion (20°C-1400 °C): < 4.0 × 10-6/ °C; Maximum Working Temperature: 1550 °C. |
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Graphite degassing rotor |
|
|
Our graphite rotor is made from high quality graphite powders, designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good washing resistance of molten aluminum, high oxidation resistance, high-speed and efficient dispersal and removal of hydrogen and other unwanted particles, long service life. Available Size: Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm; Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm. Applications: Rotating degassing system for molten aluminum and aluminum alloys. Typical Chemical Analysis: Fixed-C: > 99.90%; Moisture: < 0.10%; Ash: < 0.10%; Volatile Matter: < 0.10%. Typical Technical Data: Porosity: < 12%; Volume Density: > 1.80 g/cm3; Compressive Strength (bulk): > 60 MPa; Oxidation Rate (750 °C): < 10 mg/ (cm2?hour); Degassing Efficiency: > 50%; Revolutions: 200-750 rpm; Working Temperature: 650-800 °C; Service Life: 50-60 days. |
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Nitride bonded silicon carbide (NBSC) degassing rotor |
|
|
Our NBSC rotor is designed for excellent performance including easily replaceable and repairable separated shaft and impeller, good washing resistance of molten aluminum, high oxidation resistance, high-speed and efficient dispersal and removal of hydrogen and other unwanted particles, long service life. Available Size: Rotor shafts: diameter Φ50 mm-Φ150 mm, length 300-1700 mm; Rotor impellers: diameter Φ100 mm-Φ380 mm, thickness 40-80 mm. Applications: Rotating degassing system for molten aluminum and aluminum alloys. Typical Chemical Analysis: SiC: > 75.00%; Si3N4: > 20.00%; Free-Si: < 0.20%; Fe2O3: < 0.20%. Typical Technical Data: Porosity: < 13%; Volume Density: > 2.70 g/cm3; Compressive Strength: > 170 MPa; Degassing Efficiency: > 65%; Revolutions: 200-750 rpm; Working Temperature: 650-1400 °C; Service Life: >120 days. |
|
» Machinery & Tools/Machinery |
|
|
|
[Sell] Silicon carbide (SiC) ceramic foam filter for non-ferrous |
|
|
Our product is designed for filtering or purifying of molten aluminum, aluminium alloys, magnesium alloys and copper alloys in their smelting or casting process. a. Excellent thermal conductivity and washing resistance; b. Bring no impurities to the melts; c. Long service life. Also we can supply alumina, zirconia and magnesia based ceramic foam filters for ferrous or steel melts. Available Specs: PPI: 10-60; Maximum Thickness: 50 mm; Maximum Length (Diameter): Φ600 mm. Typical Technical Data: SiC: 65-75%, Al2O3: 22-35%, SiO2: 3-8%, Fe2O3 < 0.15%; Porosity: 80-95%; Volume Density: < 0.40-0.60 g/cm3; Compressive Strength: > 2.20 MPa; Flexural Strength: > 1.00 MPa; Thermal Shock Resistance (1110 °C): > 7 times; Working Temperature: < 1500 °C. |
|
» Machinery & Tools/Machinery |
|
|
|
|
|
Pages: 1
|
|
|
|