|
|
Company Name: |
Jinmuyu Electronics Co., Ltd |
Contact Person: |
Harry |
City: |
TongZhou District |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
Jinmuyu is one of the leading RFID reader manufacturers. We build, design and customize products to satisfy a range of customers. Our production facilities are certified under ISO/IEC10373-6, EMV2000 which are recognized all over the world. Quality and service are the foundation of our company, and continue to be our reason of success.
Our company established in 2003 and it was found by a group of engineers with experience in the area of RFID reader industry. In 2003, our company joined the advance filed of RFID technology with specific concentration on RFID readers. As the demand increase, we have developed a full line of hardware and software to meet the needs in different sectors of industry. Today, our products are being used in numerous applications serving: transits, government, hospitals, banks, ticketing store, parking lots, access control, time attendance, logistic and production line, etc.
The Jinmuyu team works hard to meet the needs of each customer. Each member is dedicated to offer competitive products and services to our clients. Our complete product line and R&D department allows us to have a fast, precise and flexible production and design to meet all requirements and quantities with the competitive price. \"Flexible, Efficient, and Quality Control\" are key factors to long-term relationship between customers and Jinmuyu.
Jinmuyu Electronics Co., Ltd\'s head-quarter is located in Beijing, with subsidiaries and strategic partners located all around the world. Jinmuyu is proud to offer products and services to customer with Consistent Quality, Constant Supply and Competitive Pricing. |
Business Type: |
Exporter, Manufacturer |
Areas of
Interest: |
1. Electronics & Electricals/Components 2. Electronics & Electricals/Electronic Instruments
|
|
|
|
Offers
From This Member (17) |
|
|
|
[Sell] sell 13.56MHz rfid module JMY680 IIC, UART, RS232C or USB |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm*50mm*16.5mm Weight: about 120g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz RFID Module JMY609 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the module imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the JMY609 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader. There are 2 SAM card slots in the reader. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job. Qualifications: PCD: NXP RC522, RC523 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B Operating distance: 80mm (Mifare One, typical distance) SAM card slot: 2 slots, (supported ISO7816 T=0 and T=1) Interface: USB (HID standard) Power supply: DC5V Power consumption: 180mA Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] Sell 13.56 MHz rfid module JMY608 Interface: USB (HID standard) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab and so on after the output of the number and the data of the card. The default of the JMY608 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader. Qualifications: PCD: NXP RC400 Working frequency: 13.56MHz RF standard: ISO15693 Operating distance: 100mm SAM card slot: no Interface: USB (HID standard) Power supply: DC5V Power consumption: 180mA Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] Sell 13.56MHz rfid module JMY603 Interface: UART |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Qualifications: Authenticated: BCTC(the Bank Card Test Center )--contactless Bank Card LEVEL 1 PCD: NXP RC500, RC531, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, typical distance) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512 Bytes Interface: UART Baud rate: 19200--115200 BPS Power supply: DC5V Power consumption: 80mA Dimension: 85mm*60mm*10mm Weight: about 25g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] Supply 13.56MHz rfid module JMY602 Interface: IIC, UART, RS232C or USB |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compliant with ISO7816 (T=0 and T=1). And also it supports SAM card(38400bps)which was used in domestic card management system. JMY602 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, typical distance) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF SAM card slot: 1 slot, 9600bps/38400bps EEPROM: 512 Bytes PPSS: supported Interface: IIC, UART, RS232C or USB (embedded CP2102 USB to RS232 converter) Baud rate: IIC: 400Kbps, UART/RS232/USB to RS232: 19200--115200 bps Max.command length: 254 Bytes /511 Bytes Power supply: DC5V Power consumption: 80mA Dimension: 100mm*70mm*10.2mm Weight: about 120g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: supported RoHS: Compliant |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] Sell 13.56MHz rfid module JMY601 Interface: UART(TTL Level)) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through UART interface. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Qualifications: PCD: NXP RC531, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(Mifare One, typical distance) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512 Bytes Interface: UART(TTL Level) Baud rate: 19200bps--115200 bps Max.command length: 254 Bytes Interface level: 3.3V(TTL level; 5V tolerance) Power supply: DC5V Power consumption: 80mA Dimension: 60mm*60mm*5.7mm Weight: about 20g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade RoHS: Compliant |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] Sell 13.56MHz RFID Module JMY506 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability. Qualifications: PCD: NXP RC522, RC523 Working frequency: 13.56MHz Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order RF standard: ISO14443A, ISO14443B Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512 Bytes Interface: IIC&UART(selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps Max.command length: 254 Bytes Interface level: 3.3V(TTL level; 5V tolerance) Power supply: DC 5.0V Power consumption: 50mA Dimension: 42mm*21mm*8mm Package: DIP32 Weight: about 15g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz RFID Module JMY505 50ohm coaxial cable |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability. Qualifications: PCD: MF RC500, RC531, RC632, RC400 Working frequency: 13.56MHz Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only EEPROM: 512 Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V(TTL level; 5V tolerance) Power supply: DC 5.0V Power consumption: 70mA Dimension: 42mm*21mm*8mm Package: DIP32 Weight: about 15g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz rfid module JMY504 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC522, RC523 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512 Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps Max.command length: 254 Bytes Interface level: 3.3V(TTL level; 5V tolerance) Power supply: DC 5.0V Power consumption: 50mA Dimension: 42mm*21mm*8mm Package: DIP32 Weight: about 15g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant
|
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz RFID Module JMY501 Interface: IIC & UART |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.------ JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm*21mm*8mm Package: DIP32 Weight: about 15g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade ISP: Supported RoHS: Compliant |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz rfid reader MR600 LED Nixie Tube |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED Nixie tube which displays 8 numbers. The reader fully supports the IC card according to ISO14443A, ISO14443B, ISO15693 and ISO7816(T=0 & T=1); Various contactless IC card under international standard. The reader embeds SAM card slot. We do the optimization for application of domestic card system and so it can support fully SAM card according to ISO7816 (9600bps & 38400bps). Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, typical distance) SAM card slot: 1 slot, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 1.5W Dimension: 141mm*100mm*31mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz rfid reader MR730 Interface: Ethernet RJ45 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The reader supports series IC cards according to ISO14443 & ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratories--Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. The reader embeds SAM card slot. We do the optimization for application of domestic payment system and so it can support fully SAM card under 9600bps & 38400bps. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, typical distance) SAM card slot: 1 slot, supported ISO7816 T=0, supported 9600bps&38400bps Interface: Ethernet RJ45 Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 1.5W Dimension: 141mm*100mm*31mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell rfid 13.56MHz reader MR761 PCD: NXP RC522, RC523 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data by the way of simulation keyboard through USB interface. MR761 IC card is desktop reader with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the MR761 is configuration mode in factory setting. If you want to let the reader work, you need deploy it through the software and input the configuration information to the reader. The reader embeds 2 SAM card slots. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job. Qualifications: PCD: NXP RC522, RC523 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B Operating distance: 80mm (Mifare One, typical distance) SAM card slot: 2 slots, (supported ISO7816 T=0 and T=1) Interface: USB (HID standard) Power supply: DC5V Power consumption: 0.6W Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade
|
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz rfid reader MR760 USB (HID standard) |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR760 series, based on NXP SL RC400,RC632 are the desktop reader. The reader supports series IC cards according to ISO15693,ISO14443A, ISO14443B and the reader imitates the USB keyboard to read and output the card data. MR760 IC card is desktop reader with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the MR760 is configuration mode in factory setting. If you want to let the reader work, you need deploy it through the software and input the configuration information to the reader. We monitor the quality of the products strictly by the introduction of advanced equipment, to ensure that the reader has good quality and stability. Qualifications: PCD: NXP RC400,RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (I.CODE SLI, typical distance) SAM card slot: no Interface: USB (HID standard) Power supply: DC5V Power consumption: 0.6W Dimension: 123mm*88mm*25mm Weight: about 150g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz rfid reader MR780 Interface: RS232C or USB |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR780 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ISO14443, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 3 SAM card slots in the reader(T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, typical distance) SAM card slot: 3 slots, (supported ISO7816 T=0 and T=1) Interface: RS232C or USB (build-in CP2102 USB to UART converter) Baud rate: 9600--115200 BPS Power supply: DC5V Power consumption: 0.9W Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade
|
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz rfid reader MR810 MCU: ARM7 |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 2 SAM card slots in the reader which support SAM cards compliant with ISO7816 (T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset; SAM operation of various communication rate. Qualifications: PCD: NXP RC531, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, typical distance) Operating distance: 2 slots, (supports ISO7816 T=0 and T=1) Interface: USB PC/SC Power supply: DC5V Power consumption: 0.9W Dimension: 123mm*88mm*25mm Weight: about 100g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade |
|
» Electronics & Electricals/Components |
|
|
|
[Sell] sell 13.56MHz rfid reader MR800 Interface: USB PC/SC |
|
|
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me. MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1). Qualifications: PCD: NXP RC531, RC632; RC400, RC500(select) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, typical distance) SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1) Interface: USB PC/SC Power supply: USB DC5V Power consumption: 0.9W LED: four LED (red, green, blue, yellow) Dimension: 123mm*88mm*25mm Weight: About 200g Operating temperature: -25 ~ +85 centigrade Storage temperature: -40 ~ +125 centigrade
|
|
» Electronics & Electricals/Components |
|
|
|
|
|
Pages: 1
|
|
|
|