|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology Co., Ltd. |
| Contact Person: |
Alice |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Hong Kong Hong Ye Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers\' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
Customers and distributors from around the world are welcomed to negotiate with us for business cooperation. Let\'s join hands and strive for mutu al prosperity.
|
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. Chemicals/Rubber
|
|
|
|
Offers
From This Member (6) |
|
|
|
[Sell] RTV Silicone rubber HY638 for concrete casting |
 |
|
Usage:
RTV Silicone rubber HY638 is most suitable for concrete castings, cement statue, concrete pavers, GRC cement products, etc. with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc.
It is suitable for large products with detailed pattern, which is difficult to demould.
This silicone rubber is one of the products with the highest use level in the production of concrete castings and the shrinkage is up to 0.2%.
Description: 　　
RTV-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance.
Add curing agent of 2%~5% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.
Standard datasheet:
Model appearance viscosity (cps): 20000~26000
Hardness (shore A): 32~36
Tensile Strength (Kgf/cm2):45~51
Tear strength (Kgf/㎝): 20~25
Elongation (%) ≧500
Mixing ratio (%):2~3
Operating time (h): 0.5
Curing time (h):2~4
Operation instruction for RTV-2 silicone rubber HY638#:　　
The product is white or red flowing liquid with general hardness of 22~50 shore A after curing.
If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness.
On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness.
The amount of the curing agent depends on the actual requirements of the customer.
If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
Notes:
We do not recommend adding silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%~10% silicone oil can be added to soften the mold for easy demould.
The proportions and reactions of the curing agent and the silicon are listed as follows: 　　
Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours. 　　
Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours. 　　
Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.
Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded.
Any further information pls feel free to contact with Ms Alice ( Sales Director)
Shenzhen Hong Ye Jie Technology Co., Ltd. |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Silicone rubber for mold making |
|
|
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicone rubber for mold making description
Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030
Mobile: 0086-13510188049
E-mail: alice(at)szrl(dot)net
Website: www(dot)szrl(dot)net |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Pad Printing Silicone Rubber |
|
|
Pad printing silicone :
1. resistance to deformation, high-temperature
2. high printing times
3. good aging resistance
4. exceptional elasticity
5 great printing effect
Pad Printing Silicone Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
.
Pad Printing Silicone Rubber Operation Instructions:
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.
.
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030 |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Manual Molding Silicone Rubber |
|
|
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc.
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030
Mobile: 0086-13510188049
E-mail: alice(at)szrl(dot)net
Website: www(dot)szrl(dot)net |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Silicone rubber for mold making |
|
|
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Silicone rubber for mold making applications
Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030 |
|
| » Chemicals/Rubber |
|
|
|
[Sell] Addition cure silicone rubber for making molds |
|
|
1. Brief description of Addition cure silicone rubber :
Addition cure silicone rubber is with the all the advantage of rtv-2 condensation cure silicone rubber, but is also featured with lower shrinkage and low viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously, so it will be deeply-cured. The E sereise addition cure silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it's very suitable for all kinds of mold with a variety of sizes, shapes and large sized plaster, cement,ect molds making.
2. Addition cure silicone rubber applications:
Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making, life casting, medical catheter and so on.
3. Addition cure silicone rubber features:
a)Two-component silicone rubber with platinum catalyst
b)With high transparency, tensile strength, and tear strength.
c)Nontoxic & reach to Food grade
d)With good heat stability and weatherability ( temperature resistant range of -60~250 C)
e)With heat-ageing resistance
Any further information pls feel free to contact with Ms Alice ( Sales manager)
TEL: 0086-755-89948294
Fax: 0086-755-89948030
Mobile: 0086-13510188049
E-mail: alice(at)szrl(dot)net
Website: www(dot)szrl(dot)net |
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
