|
|
|
Company Name: |
Anping Lingus Steel Grating Factory |
| Contact Person: |
Linda |
| City: |
Anping |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Lingus Steel Grating Factory is located in Anping county, Hebei province, China. It is engage with steel grating business for many years. We supply steel grating products with the materials: galvanized steel grating, stainless steel grating, welded carbon steel grating and so on. Steel grating is made of steel reinforced structures by the load flat seel and bars with certain distances arranged by welding or pressure grid-shaped lock. Grating with light load capacity, air and light and other features, are widely used in walkways, bridge, ditch cover, covers, stairs, etc.
A grating covering a drain can be a collection of iron bars (the identical, elongated elements) held together to ensure the bars are parallel and regularly spaced by a lighter iron frame. Gratings over drains and air vents are used as filters, to block movement of large particles such as leaves and to allow movement of small particles such as water or air.
|
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Building & Construction/Construction
|
|
|
|
Offers
From This Member (5) |
|
|
|
[Sell] Fiberglass Steel Grating Introduction,Features, Specification, Application |
 |
|
Fiberglass Grating offers more corrosion resistance than other forms of fiberglass grating. The square placement of continuous glass strands offers stronger bi-directional loading capabilities than more common molded rectangular fiberglass grating.
Fiberglass grating has many advantages over steel grating, not only for performance but also cost competitiveness. The wide range of gratings available can satisfy general industrial needs or high load requirements like forklift traffic.
Fiberglass steel grating features and benefits
Corrosion Resistance - based on the use of premium grade, is ophthalmic polyester or vinyl ester resin systems and a synthetic surfacing veil.
Lightweight Yet Durable - less than one-half the weight of steel grating allowing easy removal for access below floor level and installation with no heavy equipment and less manpower required.
Added Safety - durable grit surface, permanently bonded and baked to the grating surface, for a safe, slip-resistant walkway.
Fire Retardant - flame spread rating of 25 or less, according to ASTM E-84; meets the self-extinguishing requirements of ASTM D-635.
Maintenance Free - corrosion resist- ant and requires no scraping, sandblasting or painting; install it and forget it.
UV Protection - UV inhibitors included in the resin formulation, along with a surfacing veil and grit top surface for optimum protection from the effects of weathering.
Easily Fabricated - no need for lifting equipment or expensive tools; can be easily carried by two workers and cut using standard circular or saber saws fitted with carbide blades.
Electrically And Thermally Non-Conductive - providing additional worker safety.
Electronically Transparent - does not affect electromagnetic or radio wave frequencies.
|
|
| » Building & Construction/Construction |
|
|
|
[Sell] Light Duty Steel Grating, Low Carbon Steel Grating And Stainless Steel Grating Types. |
|
|
Light duty welded steel gratings are manufactured from low carbon steel, stainless steel or aluminum steel. Light duty welded grating is joined at the intersection of the bearing bars and cross bars. Light duty bar grating ranges in size from 3/4" x 3/16" to 2 1/2" x 3/16".
Light duty carbon steel grating is ideal choice for the workhorse of the industrial flooring market. Light duty steel grating can be found application in walkways, conveyor system, operating plants, highways and bridge platforms and walkways, machinery floors, refineries, tank stairways and power plants.
Light duty stainless steel grating is also available for specific applications. The open grid construction of steel grating provides maximum passage for light, air circulation and drainage. It is often used as celling in factory or industrial workshops.
Light duty steel grating finish can be galvanized or manufacturer's standard black paint at the discretion of the architect. It can also be painted by request.
Light duty steel grating manufacturing tolerances
Cross bar alignment and spacing
Cross bar shall not vary more than 1/8" in 12" either direction from perpendicular alignment with bearing bars.
Overall dimensions and squareness
Width is overall lengths of cross bars at opposite ends of panels.
|
|
| » Building & Construction/Construction |
|
|
|
[Sell] Heavy Type Welded Steel Grating Information, Types And Order |
|
|
Heavy duty welded gratings are made of carbon steel and stainless steel. The former products are available bare, painted with hot galvanizing. The latter products are available mild finish, electro- polished.
Welded Steel Bar Grating is the most popular of all grating types due to its strength, cost-efficient production and ease of installation. It is the ideal materials for application such as airfields, highways, industrial plants, truck and bus terminals, parking lots and railroad yards. Common uses are flooring, driveways, subway an d tunnel ventilation grilles, curb inlet grates, ramps, docks, etc.
When order steel grating, you should give the welded steel grating types. Heavy duty welded steel W series, heavy duty welded WH series, heavy duty riveted steel R series, heavy duty standard welded grating and so on.
When specify welded steel grating, first specify the type of grating . In the instance of standard welded grating, the "W" indicates the assembly of the grating shall be Welded construction, the "19" indicates that the bearing bars shall be 19/16's (1-3/16) inches on center, and the "4" indicates that the cross bars shall be spaced at 4 inches on center. Following selection of the type of grating, Proper designation for standard welded grating with 1" x 3/16" bearing bars is indicated W-19-4 1" x 3/16".
Heavy duty welded grating ranges in size from 1-1/4" X 1/4" bearing bars through
6" x 1/2" (7" bearing bars available by inquiry). Standard bearing bar spacings are
15/16", 13/16", 1-3/8", 1-7/8" and 2-3/8" center-to-center. See pages 25 and 27 for standard cross bar design. Rectangular cross bars are also available. Standard cross bar spacings are 4" or 2" center-to-center.
|
|
| » Building & Construction/Construction |
|
|
|
[Sell] Welded steel grating material, top surface, order |
|
|
Welded Steel Bar Grating is the most popular of all grating types due to its strength, cost-efficient production and ease of installation. Universally used in most general industrial plants as well as commercial buildings, it has wide applications as walkways, platforms, safety barriers, drainage covers and ventilation grates.
Materials: mild steel, stainless steel 304 or 316
Surface treatment: galvanizing, bitumen dipped, painted, untreated.
Top surface: plain, flattened, raised.
It is also ideal for use as mezzanine decking since it supports the same loads as comparable solid flooring. More than that, its cost saving openness maximizes the circulation of air, light, heat, water and sound, while promoting cleanliness. And, where insurance codes permit, additional sprinklers can often be eliminated. Standard panels are available in widths of 2', 3' or 4'.
Welded steel bar grating is resistance welded to create a rugged, one-piece constructed panel. The bearing bars are automatically resistance welded at the contact point with the cross bars and, under a combination of high heat and pressure, are fused together to form a permanent joint. The cross bars provide a high degree of rigidity, yet retain a smooth flat surface for free and easy walking.
When order the welded steel grating, first specify the type of grating from the table below. In the instance of standard welded grating, the "W" indicates the assembly of the grating shall be Welded construction, the "19" indicates that the bearing bars shall be 19/16's (1-3/16) inches on center, and the "4" indicates that the cross bars shall be spaced at 4 inches on center. Following selection of the type of grating, consult the Steel Bar Grating Load Table to select the appropriate bearing bar size for the loads and spans to be serviced. Proper designation for standard welded grating with 1" x 3/16" bearing bars is indicated W-19-4 1" x 3/16".
|
|
| » Building & Construction/Construction |
|
|
|
[Sell] Press-Locked Bar Gratings With Types Of Welded, Aluminum And Stainless Steel Grating |
|
|
Press-Locked Rectangular Bar Grating is constructed with the two close-tolerance slotted bars bonded together (positioned every 2" or 4") using tremendous hydraulic pressure. Permanent locking is achieved by forcing the deep cross bar into the bearing bar. Both the cross bars and the bearing bars provide walking surfaces in the press-locked design.
Rectangular bar grating in either the swage-locked or press-locked styles is your best choice when lateral stiffness is required. The rectangular bar is also available in a serrated surface for additional safety.
Press-Locked Steel Bar Grating is often desirable because of its clean, smooth look and excellent lateral support. It exhibits the same strength, long life and openness as welded grating, although it is not recommended for rolling loads. Instead of welding the joints, however, tremendous hydraulic pressure is used to bond the two close-tolerance slotted bars together. Permanent locking is achieved by forcing the deep cross bar into the notched bearing bar.
|
|
| » Building & Construction/Construction |
|
|
|
|
|
Pages: 1
|
|
|
|
|
