|
[Sell] Plaster Casing Beads |
 |
|
Plaster corner bead is a kind of plaster accessories made popularly of expanded metal and perforated metal mesh. Metal plaster bead can be installed using standard industry practice with drywall nails, staples, screws or clinching tool and features deeply knurled mud anchors for perfect mud adhesion.
Flange width for plaster bead is 1-1/4". 1-1/4" drywall plaster corner bead is available in 7', 8', 10' and 12' length.
Plaster beads can be casing bead or corner bead, helps trim the angle and corners of wall plastering. |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] Perforated Metal Corner Beads |
|
|
Perforated metal corner bead serves as a plastering stop to ensure a neat finish. Perforated corner bead is a metal strip attached along an inside or outside corner of two stucco walls. The perforated flange grounds 3/8", 1/2", 5/8", or 3/4" (1", 1-1/8", 1-1/4" and 1-1/2" special order, minimum quantities may apply) to suit all needs.
Materials: Galvanized steel or zinc plated steel sheet.
Features: Perforated metal corner beads have firm strength, good corrosion resistance and sharp angle.
Corner beads offer multi-type, suitable for different wall types.
It has the featured of impact resistant, anti-bumping, multi-color.
Perforated flanges are preferable for perforated corner beads. Also available with punched grounds. Perforated beads are available in multiple lengths to help reduce waste and minimize splicing. The intricate pattern of holes allows mud to penetrate through the bead to the drywall. The bead becomes part of the wall. It is easy to use. Simply fasten to the drywall for plastering. |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] Corner Bead With Reinforce Flange |
|
|
Corner Bead With Reinforce Flange have a smooth round nose bead with diamond mesh wings for the keying of plaster right up to the nose of the bead.And with wave margin and nail hole easy to install. This mesh insures a perfect bond and provides effective reinforcement where most needed. Straight edge nose is easy to install and permits plumb straight outside corners. Excellent protection for corridor corners exposed to traffic.
Angle Bead Materials:
Galvanized Steel, Stainless Steel, Zinc (99% pure zinc) Alloy.
Angle Bead : Specifications
The angle bead providing straight corners with wave margin and nail hole. Used over irregular surfaces. Plaster keys near nose for reinforcement where needed most.The angle bead plate thickness used 0.4mm-0.5mm . |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] Expanded Mesh Corner Bead |
|
|
This kind of corner bead can also be written as expanded corner beads or diamond mesh corner beads. Popularly made of expanded metal sheets, it has a opening pattern of diamond mesh.
Expanded diamond mesh corner bead serves as a plastering stop to ensure a neat finish. It is designed to provide strong corner reinforcement for conventional plaster applications. A solid metal nose provides a straight, rigid ground and the 2-5/8" flanges can be easily flexed over irregular, uneven surfaces.
The expanded beads are easily installed using standard industry practice. Plaster keys near solid nose provide reinforcement where needed most to ensure straight corners. we offer this product in both galvanized steel and zinc plating for your choice. The expanded flange grounds can be 3/8", 1/2", 5/8", or 3/4" (1", 1-1/8", 1-1/4" and 1-1/2". |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] Galvanized Corner Beads |
|
|
Galvanized corner bead is designed to provide strong corner reinforcement for conventional plaster applications. A solid metal nose provides a straight, rigid ground and the 2-5/8" flanges can be easily flexed over irregular, uneven surfaces.
Galvanized corner bead is easily used in plaster providing reinforcement where needed most to ensure straight corners. Wide expanded flange corner bead provides additional rigidity and strength with its reinforced flanges. This product is for use on masonry, beams, and column fireproofing. Combination of expanded flanges and pronounced bead nose ensures successful corner alignment and efficient plaster keying from edge to nose. |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] Stainless Steel Corner Beads |
|
|
Materials: Stainless steel perforated sheets, or expanded metal
Features: Corrosion resistance, flat surface, sharp angle. Corner beads made of stainless steel sheets offer excellent corrosion resistance, flat surface and sharp angle. Stainless steel corner beads are manufactured to the same dimensions as the galvanized beads and are suitable for exterior application, thermal insulation systems.
Dimensions:
Standard sizes:
8mm, 10 mm and 15mm.
Made-to-measure available for 200 cm length.
Packaging:
In 20 ml bundles. In 500 linear meter pallets.
Application: Stainless steel corner beads are used to make flat decorative facade joints on raked render. The stainless steel materials work specially fine in the places where there is a long term humidity like sanitary rooms, domestic bathrooms and kitchens wall plastering. |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] For Interior Drywall |
|
|
Interior corner beads are the most easily forgotten aspect of a drywall job. Designed for internal use plaster uses, manufactured from quality galvanized steel sheet, perforated mesh. Solid flanges are preferable. Corner bead are adapt to framing irregularities and to match appropriate screed heights. 90o and 135o Internal corner beads are designed to give you perfectly straight, sharp inside corners every time. Use Inside corner for finishing wall niches quickly and easily. 90o and 135o Internal corner beads are self aligning and is perfect wherever crooked framing is a problem or when drywall doesn't meet perfectly in the corner.
Interior Corner Bead Materials:
Galvanized Steel, Aluminum,Stainless Steel,Zinc (99% pure zinc) Alloy
Specifications:
90o Internal corner beads providing perfectly straight, sharp inside corners with nail hole.
135o Internal corner beads providing straight corners with nail hole. Used over flat surfaces. Plaster keys near nose for reinforcement where needed most. |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] For Exterior Render |
|
|
This angle bead finishes and protects inside brick. Then the wall angles can be plastered. Using of corner beads for exterior render allows adjustment of render thickness to 6 mm.
Technical Description:
Materials: Galvanized steel sheets.
Features: Sharp angle. Expanded metal wings have slots so that the render grips the inside wall perfectly.
Dimensions:
25 x 25 mm. Length: 2, 2.5 linear meter |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] For Raked Render Angles |
|
|
This kind of corner bead provides a finish and protects external raked render angles. Using of this metal corner beads enables adjustment of all thickness renders.
Technical Description:
Materials: Galvanized expanded metal sheet or perforated metal sheets.
Can be made with P.V.C. nosing.
Corner beads for raked render angles have three standard models for render thicknesses of 8, 10 and 15 mm.
Dimensions:
Corner beads have 42 mm wings. Length of angle bead can be 225, 250, 300 cm. |
|
| » Machinery & Tools/Satellite |
|
|
|
[Sell] Corner Beads |
|
|
Corner beads offered include metal products processed corner beads and plaster beads. Products available with Corner Beads, Corner Beads for Exterior Render, Plaster Beads, Lower Raked Render Bead, Corner Beads for Traditional Walls, Expanded Corner Bead, Perforated Corner Bead, Angle Bead and Plaster Casing Beads.
Chief Angle Beads According to Uses:
Corner Beads for Raked Render Angles:
This kind of corner bead provides a finish and protects external raked render angles. Using of this metal corner beads enables adjustment of all thickness renders.
Technical Description:
Materials: Galvanized expanded metal sheet or perforated metal sheets.
Can be made with P.V.C. nosing.
Corner beads for raked render angles have three standard models for render thicknesses of 8, 10 and 15 mm.
Dimensions:
Corner beads have 42 mm wings. Length of angle bead can be 225, 250, 300 cm. |
|
| » Machinery & Tools/Satellite |
|
|
|
|
|
Pages: 1
|
|
|
|
