|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology Co., Ltd. |
| Contact Person: |
Ms. Rose Luo |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller, etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers\' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
Customers and distributors from around the world are welcomed to negotiate with us for business cooperation. Let\'s join hands and strive for mutu al prosperity.
|
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. Chemicals/Rubber
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] Mold making silicone rubber |
 |
|
Brief description:
Mold making silicone rubber:
1. Resistance to deformation, high-temperature
2. High reproduction times
3. Good tensile strength
4. Exceptional fluidity and good operability.
Detailed description:
Mold making silicone rubber
Mold making silicone rubber applications
Mold making silicone rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Mold making silicone rubber description
Mold making silicone rubber is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any questions of Mold making silicone rubber, please feel free to contact Rose:
E-MAIL: hyjz@szrl.net
TEL: 086-755-89948294
Mobile:86-1938867525
Place of Origin Guangdong China
Brand Name Hong Ye Silicone Rubber
Model Number HY625 HY630 silicone rubber
Payment & Shipping Terms:
Minimum Order Quantity: 200 Kilogram
Price: FOB shenzhen USD 5.8~7.5/kg
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C, T/T
Supply Ability: 8 Ton per Day 240 ton per month
Certifications: ROHS.MSDS.SGS ISO9001:2000
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Manual Molding Silicone Rubber |
|
|
Brief Description/Features of Manual Molding Silicone Rubber
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment ant vibration, etc.
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment ant vibration.
c. Operation Instructions for Manual Molding Silicone Rubber
RTV-2 Manual Molding Silicone Rubber is a flow able liquid, and the quality has nothing to do with the color. It consists of two commonest. Part A is a flow able liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum zing, it will not be operated.
FAQ of manual molding silicone rubber –
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, and then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or an unsmoothed surface, you should polish and clean the products, after which it will be molded, then spray the release agent. Normally, the release agent can be Vaseline, detergent, liquid wax, etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pours the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
Further information on Manual Molding Silicone Rubber is available. Please feel free to contact Rose.
Website: http://www.szrl.net
Tel: 0086-755-89948294.
Mobile: 0086-18938867525
Fax: 0086-755-89948030
E-mail: hyjz@szrl.net
ADD: Liulian Shibi industrial, Pingdi town, Longgang district, Shenzhen, China
SHENZHEN HONG YE JIE TECHNOLOGY CO., LTD
Place of Origin Guangdong China
Brand Name Hong Ye Silicone Rubber
Model Number HY528, HY540 manual mold silicone rubber
Payment & Shipping Terms:
Minimum Order Quantity: 200 Kilogram
Price: FOB shenzhen USD 4.8~7.5/KG
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T
Supply Ability: 8 Ton per Day
Certifications: ROHS.MSDS.SGS ISO9001:2000
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Pad Printing Silicone Rubber |
|
|
Brief description:
Pad printing silicone:
1. Resistance to deformation, high-temperature
2. High printing times
3. Good aging resistance
4. Exceptional elasticity
5. Great printing effect
Pad Printing Silicone Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface.
Pad Printing Silicone Rubber Features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
Pad Printing Silicone Rubber Operation Instructions:
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fitter 2-4 hours, you will get a Pad printing silicone rubber.
Any questions of Pad Printing Silicone Rubber, please feel free to contact Rose:
E-MAIL: hyjz@szrl.net
TEL: 086-755-89948294
Mobile:86-18938867525
Place of Origin Guangdong China
Brand Name Hong Ye Silicone Rubber
Model Number HY901#, HY902#, HY912# HY916# pad printing silicone rubber
Payment & Shipping Terms:
Minimum Order Quantity: 100 Kilogram
Price: FOB shenzhen USD 6.8-15.8/kg
Packaging Details: 20kg/drum, 20kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T
Supply Ability: 8 Ton per Day
Certifications: ROHS.MSDS.SGS ISO9001:2000
|
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
