|
|
|
Company Name: |
Shen Zhen Hong Ye Jie Technology Co., Ltd. |
| Contact Person: |
fred tang |
| City: |
shen zhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers ,special silicon for manual molding ,shoe mold rubber ,pad printing silicon ,silicon oil ,107 base ,DMC etc for plastic toys factories ，With a product line of tens of categories ,we can offer quick copying with precise contraction ratio(up to two thousandth) for mold making to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust.
It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase ;we offer on –site follow –up service for product demonstration ,free customer service to solve technical training on pad printing silicon usage and rubber head making .What you need is also what we pursue .We are committed to back you up in producing first class products .Customers old and new and distribution and deputization .Let’s join hands and strive for mutual prosperity .
|
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Chemicals/Rubber
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] RTV-2 pad printing Silicone rubber |
 |
|
RTV-2 pad printing Silicone rubber description is a two-part condensation liquid rubber. Ratio of Part A silicone to Part B curing agent is 100:2 or 100:3. Pad printing silicone rubber is used for making the printing pads for plastic toys, electroplating products, electronic toys, craftworks, stationery, computer keyboard and so on.
1. The application of RTV-2 pad printing silicone rubber:
Pad printing silicone rubber is used for making the printing pads for plastic toys, electroplating products, electronic toys, craftworks, stationery, computer keyboard and so on.
The printing pad then serves as a carrier to transfer patterns from the steel plate to the products surface.
2. Features of RTV-2 Pad printing silicone rubber HY912 HY916
a. Two components: silicone rubber and the curing agent
b. American Dupont Teflon top-quality raw material
c. Any color
d. Abrasion resistance
e. good printing effect
f. good resilience
g. high temperature resistance
h. top quality without impurities
i. silicone oil can be added to adjust the hardness if necessary
3. Technical data of RTV-2 pad printing silicone rubber
Appearance: Yellow, red, green, white
Viscosity(cs): 20000~25000
Hardness(A): 28-30
Tensile strength (kgf/cm) ≥35
Tear-strength (kgf/cm) ≥24
Elongation break: (%)≥400
Retractility (%): ≤0.3
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
Any more information, please feel free to contact Mr. Fred.
MSN:xnxytqh（at）163(dot)com
Skype: fredtqh
Email: fredtqh (at)gmail(dot)com
Tel: 086-755-89948006
Mob: 086-18711502045
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Manual mold silicone rubber |
|
|
Manual mold silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Manual mold silicone rubber features description
The manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.
Manual mold silicone rubber operations
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2% to 3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2 to 3 hours.
Frequently asked questions for Manual mold silicone rubber
What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair . If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre- crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.
Any more information, please feel free to contact Mr. Fred:
MSN:xnxytqh(at)163(dot)com
Skype: fredtqh
Email: fredtqh (at)gmail(dot)com
Tel: 086-755-89948006
Mob: 086-18711502045
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] liquid pad printing silicone rubber |
|
|
Application of liquid ( RTV-2) silicone rubber for gypsum products molding
Liquid ( RTV-2) silicone rubber for gypsum products molding is mainly applicable to gypsum products, plaster,resin, cements mold is good for casting Plasters, Cements and resin, toy craftworks, gifts and stationery, large statues, duplication of cultural relics mold making, etc.
Description of liquid silicone rubber for gypsum products molding
liquid ( RTV-2) silicone rubber for gypsum products molding is flowing liquid with consistant quality in whatever color.
Liquid silicone rubber consists of two components, where in component A is silicone rubber, and component B is curing agent or vulcanizing agent.
Specification of liquid ( RTV-2) silicone rubber for gypsum products molding
Appearance: Yellow, red, green, white
Viscosity(cp): 16000-22000
Hardness(A): 23-28
Tensile strength(Mpa) ≥3.2
Tear-strength (kn/m) ≥18
Elongation break: (%)≥380
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
Operation Instruction of liquid silicone rubber for gypsum products molding
1. liquid ( RTV-2) silicone rubber for gypsum products molding is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.
Any more information, please feel free to contact Mr. Fred:
MSN:xnxytqh(at)163(dot)com
Skype: fredtqh
Email: fredtqh (at)gmail(dot)com
Tel: 086-755-89948006
Mob: 086-18711502045
|
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
