|
|
Company Name: |
http://www.brakehoses.org |
Contact Person: |
chenhuadong |
City: |
hengshui |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
Hopwell Brake Hose Co., Ltd. is specialized in manufacturing all types of brake hoses to transportation markets all over the world. First established in the year of 1990, it has developed from a single team to a globally recognized leader in transportation markets. Our brake hose products give the good choice for any vehicle. The main products are air brake hose, hydraulic brake hose, braided brake hose as well as other types brake hoses. They are widely used for cars such as VW, Audi, BMW, Volvo, Ford, Mazda, and Nissan and so on. Our brake hoses with the quality original equipment provide excellent pedal feel and excellent braking time. The hose material is made in accordance with the specification of SAE and DOT, so customers can be assured of our products.
Every brake hose is tested by us before delivery to sell: in the pressure test it has up to 200 bar (100 percent tested for leak); destructive test of the hose, it can withstand up to 1100 bar (standard test); compatibility test with brake fluid it is in an oven at the temperature of 120 for three days, and then followed by a test for high pressure; test of volume expansion ? low extension equals good braking; deflection test: the constant pressure of 20 bar and a frequency of 800 rev/min; tensile test and a lot more are operated for a 100% guarantee of quality and safety.
We can produce brake hoses according to customers\' requirements due to our strong R&D ability. Please contact us or email us, we will respond within 12 hours. Hope to cooperate with you |
Business Type: |
Exporter |
Areas of
Interest: |
1. Raw Materials/Mines & Minerals
|
|
|
|
Offers
From This Member (7) |
|
|
|
[Sell] Custom Brake Hose Fittings |
|
|
Our company is a professional manufacturer that specializing in brake hoses, fittings and kits. Customers can have their products customized because we have a strong research and development department. If you cannot find brake hoses that suited for your requirements, please contact us and give us the drawings and your specifications, so that we can produce them. When selecting you can have a look at our technology page on selection fittings. Our brake hoses are covered with a PVC coating and are available for more colors, such as blue, red, yellow, black, and green. The kits and fittings include Misc. hose fittings, Banjo fittings, Imperial female fittings and others. You can select in the following part. |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] braided brake hose |
|
|
We are a professional company specializing in manufacture brake hoses, and our braided brake hose is our feature product. Braided brake hose is made of SS 304. Stainless steel braided brake hose is widely used for any auto, motorcycle, racing cars, beach vehicles, ATV and Scooter. It meets and exceeds the standard of SAE J1401. Characteristics It not only looks good but also has good performance of reducing system corrosion, providing the user with an excellent responsive braking system, and eliminating the "spongy" feel often found with original manufacturers' rubber hoses. Features: clear liner suited for all brake and clutch fluids, excellent braking efficiency, lightweight, easy installation, high tensile strength, and corrosion resistance. Construction The construction has three layers namely the nylon or Teflon tube, the reinforcement of stainless steel 304 and the nylon cover layer |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Nylon brake hose |
|
|
As we know that air brake hose can be divided into rubber brake hose and nylon brake hose according to the materials. In this page we will give your good knowledge of nylon brake hose on its construction, features and specifications. The nylon brake hose has found its applications of tractor, trailer and other mobile air brake systems as well as instrumentation and air accessory systems. It meets SAE specification and DOT with good performance requirements. Advantages and benefits Compare with copper tubing it saves labor cost and time-consuming. Excellent resistance of heat and light More colors are available: blue, yellow, green, red, orange, silver, and purple Construction It made of three layers: nylon inner tube, open ply nylon fiber reinforcement and nylon cover layer. And it can be also made without the reinforcement layer, we call this type A. And the products with reinforcement layer are called type B. Technical specifications: It can withstand in the temperature of -40? C to 93? C (-40? F to200? F). The max working pressure can be up to 150 psi. |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Rubber brake hose |
|
|
According to the materials brake hoses can be divided into rubber brake hose and nylon brake hose. In the following we intend to introduce rubber brake hose to you. Inner construction of the rubber brake hose Technical specifications: Hose ID: 3.3mm - 3.5mm Hose OD: 10.3mm - 10.7mm Minimum burst pressure is 900 psi. More colors are available, such as red, yellow, blue, and black. It is accorded with SAE J1401 specifications and compatible with DOT3, DOT4 and most non-petroleum based brake fluids including silicone. |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Hydraulic brake hose |
|
|
We not only provide air brake hose but also supply hydraulic brake hose for hydraulic brake systems. The products find applications in all kinds of automobiles and motorcycles to transfer hydraulic power. They meet or exceed the standard of SAE J1401 and are compatible with the brake fluid DOT3, DOT4, DOT4+. Material of the construction: The tube is made of EPDM. It is perfectly resist to oil, heat and permeation of water. The reinforcement is made of high strength polyester fiber treated by special resin. The cover is also made of EPDM. The middle layer is viscosity-strengthen rubber between reinforcements to provide high dynamic capability. Advantages and benefits: Excellent resistance of heat, ozone and abrasion, low volume expansion, high working temperature of -55?C to +125?C. It has good performance of excellent flexibility, bursting resistance, high tensile strength and reliable braking effects |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Air brake hose |
|
|
Our company can supply air brake hoses. Air brake hoses are widely used for air brake systems for light trucks, buses and automobiles. They are accorded with the standard of SAE J1402. Advantages and benefits: The product is low inner volume expansion, low moisture permeation and resistant to oil, weather and ozone. It can withstand in the temperature of -40?C to 100?C. Its construction has four parts. The inner tube is made of EPDM. The reinforcement layer is braided yarn. The middle layer is viscosity-strength middle rubber. The cover layer is also made of EPDM. We supply two kinds of air brake hose namely air brake hose of two spiral construction and four spiral construction. These two kinds of air brake hoses meet DOT FMVSS-106 hose requirements with two-spiral or four-spiral polyester reinforcement. They have unique features of excellent weather, ozone and abrasion resistance. Moreover it has a long service life for its durability. And the working temperature can be -40?C to 93?C (-40?F to +200?F) |
|
» Raw Materials/Mines & Minerals |
|
|
|
[Sell] Brake hose |
|
|
At present, the brake hoses are generally the brake hose assemblies with connectors on the market. They can be divided into hydraulic brake hose, air brake hose and vacuum brake hose according to different forms of automotive brake, and rubber and nylon brake hose according to the materials. Rubber brake hose has strong tensile capacity and the advantage of easy installation. However after a prolonged use the surface is easy to aging. Nylon brake hose has anti-aging, corrosion resistance advantages but its tensile capacity weakened at low-temperature. Also it is easy to break by the external force. Applications: Brake hose is used in automotive brake system and it is to pass brake media to ensure the braking force can be transmitted to the vehicle brake shoe or the brake caliper generates a braking force thus the car can brake efficiently at any time |
|
» Raw Materials/Mines & Minerals |
|
|
|
|
|
Pages: 1
|
|
|
|