|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology Co., Ltd. |
| Contact Person: |
Judy lotus |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers ,special silicon for manual molding ,shoe mold rubber ,pad printing silicon ,silicon oil ,107 base ,DMC etc for plastic toys factories ,With a product line of tens of categories ,we can offer quick copying with precise contraction ratio(up to two thousandth) for mold making .to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust.
It is our solemn commitment that :any of our products with quality problems will be replaced within 3 months after purchase ;we offer on ?site follow ?up service for product demonstration ,free customer service to solve technical training on pad printing silicon usage and rubber head making .What you need is also what we pursue .We are committed to back you up in producing first class products .Customers old and new and distribution and deputization .Let?s join hands and strive for mutual prosperity .
|
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Chemicals/Organics
|
|
|
|
Offers
From This Member (5) |
|
|
|
[Sell] Silicon rubber for mold making |
 |
|
1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
2. Silicon rubber for mold making is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicon rubber for mold making features
Silicon rubber for mold making is white flowing liquid with general hardness of 22-50 shore A after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)Resistance to acid-alkali and expansion
(7)Good fluidity
(8)High copy times
(9)Catalyst in free
(10)Technical service provided
Silicon rubber for mold making operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
For more information , please contact with Ms Judy
Office No.:0086-755-89948013
Mob:86-13974195268
Skype:Lotus201399
MSN:Lotusjudy@hotmail.com
Email :hyxy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Chemicals/Organics |
|
|
|
[Sell] Silicone rubber for concrete molds |
|
|
1. Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products .
Silicone rubber for concrete molds features
Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50 shore A after curing with features ------
(1) High tensile & tear strength
(2) High duplication times
(3) Low linear shrinkage
(4) Resistance to high-temperature
(5) Low shrinkage and non-deformation
(6) Resistance to acid-alkali and expansion
Silicon rubber for concrete molds operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .
Shelf life for silicon rubber concrete molds
10~12months, when stored in a dry & cool place under the room temperature 25.
For more information , please contact with Ms Judy
Office No.:0086-755-89948013
Mob:86-13974195268
Skype:Lotus201399
MSN:Lotusjudy@hotmail.com
Email :hyxy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Chemicals/Organics |
|
|
|
[Sell] Platinum cured silicone rubber |
|
|
Platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3)Exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
For more information , please contact with Ms Judy
Office No.:0086-755-89948013
Mob:86-13974195268
Skype:Lotus201399
MSN:Lotusjudy@hotmail.com
Email :hyxy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Chemicals/Organics |
|
|
|
[Sell] Pad Printing Silicon Rubber |
|
|
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) Abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
For more information , please contact with Ms Judy
Office No.:0086-755-89948013
Mob:86-13974195268
Skype:Lotus201399
MSN:Lotusjudy@hotmail.com
Email :hyxy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Chemicals/Organics |
|
|
|
[Sell] Manual mold design silicone rubber |
|
|
Manual mold design silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Manual mold silicone rubber features description
The manual mold design silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.
Manual mold design silicone rubber operations
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.
(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.)
|
|
| » Chemicals/Organics |
|
|
|
|
|
Pages: 1
|
|
|
|
|
