|
|
|
Company Name: |
SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. |
| Contact Person: |
orianna |
| City: |
Shenzhen, Guangdong |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers, special silicon for manual molding, shoe mold rubber, pad printing silicon, silicon oil, 107 based DMC etc for plastic toys factories. With a product line of tens of categories, we can offer quick copying with precise contraction ratio (up to two thousandth) for mold making .to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust.
It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase; we offer on-site follow-up service for product demonstration, free customer service to solve technical training on pad printing silicon usage and rubber head making .What you need is also what we pursue .We are committed to back you up in producing first class products. Customers old and new and distribution and deputization. Let?s join hands and strive for mutual prosperity.
Our company is a manufacturer of silicone rubber for mold making. And our product have the advantage of good fluidity, high tensile and tear strength and high copy times. Besides we will provide you catalyst and technical service in free.
|
| Business Type: |
Manufacturer |
| Areas of
Interest: |
1. Chemicals/Organics
2. Chemicals/Other
|
|
|
|
Offers
From This Member (5) |
|
|
|
[Sell] Liquid Silicone rubber for gypsum molds |
 |
|
Liquid Silicone rubber for gypsum molds
Liquid Silicone rubber for gypsum applications
Liquid Silicone rubber can used for gypsum crafts, gypsum statues, gypsum ceiling rose, gypsum columns, gypsum line, gypsum ceiling board, and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22 to 50 shore A after curing with features as follows: high tensile and tear strength; high duplication times; Low linear shrinkage; resistance to high-temperature; Low shrinkage and non-deformation; resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original gypsum mold slowly.
Shelf life for Liquid Silicone rubber
10 to 12months, when stored in a dry & cool place under the room temperature 25.
Packing for Liquid Silicone rubber
1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum
For more information, please feel free to contact Ms Orianna
office no. : 0086-755-89948013
Mob:86-18938867545
Skype: orianna317
Email : hyyg(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Chemicals/Organics |
|
|
|
[Sell] Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kgs/drum vacuumed packing
For more information , pls feel free to contact Ms Orianna
office no. :0086-755-89948013
Mob:86-18938867545
Skype:orianna317
Email :hyyg(at)szrl(dot)net
Welcome to our website www dot szrl dot n
|
|
| » Chemicals/Organics |
|
|
|
[Sell] Platinum cured silicone rubber |
|
|
Platinum cured silicone rubber
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone, generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1 to 1.It is suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other food product molds making
.
Advantage of platinum cure silicone rubber
1) Non-shrinkage (less than 0.1%)
2) high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1)
4) high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1 to1 and mix the two parts evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly.
Shelf life for silicon rubber for mold making
8 to10months, when stored in a dry and cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A plus 20kg/drum for part B in one set
,200 kg/drum for part A plus 200kg/drum for part B in one set
For more information , pls feel free to contact Ms Orianna
office no. :0086-755-89948013
Mob:86-18938867545
Skype:orianna317
Email :hyyg(at)szrl(dot)net
|
|
| » Chemicals/Organics |
|
|
|
[Sell] Platinum cured silicone rubber for tire mold |
|
|
Platinum cured silicone rubber for tire mold
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid, generally named two-components silicone rubber with mixing in 1 to1 .It is mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1) Non-shrinkage
2) high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1 to1 )
4) high temperature resistant in 250 centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1 to1 and mix the two parts evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly.
Shelf life for silicon rubber for mold making
8 to10months, when stored in a dry and cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A plus 20kg/drum for part B in one set,
200kg/drum for part A plus 200kg/drum for part B in one set
For more information , pls feel free to contact Ms Orianna
office no. :0086-755-89948013
Mob:86-18938867545
Skype:orianna317
Email :hyyg(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Chemicals/Organics |
|
|
|
[Sell] Silicon rubber for mold making |
|
|
Silicon rubber for mold making
Silicon rubber for mold making applications
1. Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry.
2. Silicon rubber for mold making is applicable for large statue Buddha, relieve, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3. Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicon rubber for mold making features
Silicon rubber for mold making is white flowing liquid with general hardness of 22-50 shore A after curing with features:
(1) high tensile and tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Silicon rubber for mold making operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Brushing cast and Perfusion Molding operation
Shelf life for silicon rubber for mold making
10 to12months, when stored in a dry to cool place under the room temperature 25.
Packing for silicon rubber for mold making
1kg/ bottle,5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum
For more information, pls feel free to contact Ms Orianna
office no. : 0086-755-89948013
Mob: 86-18938867545
Skype: orianna317
Email : hyyg(at)szrl(dot)net
Welcome to our website www dot szrl dot n
|
|
| » Chemicals/Organics |
|
|
|
|
|
Pages: 1
|
|
|
|
|
