|
|
|
Company Name: |
vipeak heavy industry machinery co.,ltd |
| Contact Person: |
coconing ning |
| City: |
Zhengzhou |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Being a leading company in industrial powder processing, engineering stone crushing and construction sand making, Vipeak Heavy Industry Machinery Group Company is a high-tech mining machinery company in China. Our service has expanded to the entire world, almost including 75 countries. From engineering stone, construction sand to engineering powder. All equipments from VIPEAK exert great productivity and stability on working sites, make the customers satisfied. We strongly feel that customers do not only need equipments with good performance, but in the hope of their efficiency, their benefit and their competitive power. So high value added equipments have been produced. We have never been satisfied; our customer\'s satisfaction is our utmost objective. Vipeak Declaration is made of Vipeak Spirit, Vipeak Aim, Vipeak Concept, Vipeak Brand Concept and Vipeak Service Concept.
Vipeak: Technology is source, perseverance makes success.
Vipeak Aim: Eligible quality is the obligation for society, and good quality is the contribution for society.
Vipeak Concept: To be your satisfied partner (all the customers and partners of our company and the staff in our company are satisfied).
Vipeak Spirit: Efficiency, Communication, Service, Study
http://www.raymondgrindingmill.org |
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. Raw Materials/Mines & Minerals
|
|
|
|
Offers
From This Member (10) |
|
|
|
[Sell] hammer crusher/crusher/stone crusher/crusher machine/crushing machine |
 |
|
Hammer crusher is widely used in cement, chemical, metallurgic industry and so on for crushing medium-hard stuffs, such as limestone, slag, pet coke, coal, etc. The final product can be adjusted according to customers demand through equipping different gratings. The material crushed by the Hammer Crusher (Hammer Mill) through the collisions between high-speed hammer and materials. The PC Hammer Crusher(Hammer Mill) were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
Working Principle of Hammer Crusher:
The motor drives the rotor rotates of the Hammer Crusher at a high speed through the belt, and on the rotor there are series hammers. When the materials get into the working area of hammers, they are crushed by the rotating hammers of the Hammer Crusher with high rotation speed, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushed area by the hammers of the Hammer Crusher for being re-crushed until they reached the required size.
Product Advantages of Hammer Crusher (Hammer Mill):
Simple structure,
High reduction ration,
High efficiency,
Low Cost
Company Name: Henan Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com |
|
| » Machinery & Tools/Heavy Equipment |
|
|
|
[Sell] Spring cone crusher/cone crushing/crushing machine/stone breaker |
|
|
Cone Crusher is widely used in metallurgical industry, building materials industry, construction industry, chemical industry and silicate industry, applicable to crush various kinds of ores and rocks of medium or above medium hardness, and cone crusher is of big crushing ratio, high efficiency, large capacity, low cost, easy adjustment, and used economically, etc. The reasonable part selection and structural design extend crushers usage life, and the final products of uniform particle size reduce the cycle load, the medium to large-sized crusher, adopts the hydraulic clear-cavity system, reduces downtime, and various types of crusher cavity to better adapt to users needs.
Spring Cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening. During operation, the motor drives the eccentric shaft shells to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.Spring Cone Crusher Working Principle:During operation, the motor drives the eccentric shaft shells to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.Spring Cone Crusher Advantages and features:High productivity; high quality; less machine stop time; easy maintenance and lost cost; unique crushing ability in primary, secondary and tertiary crushing.
Company Name: Henan Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com |
|
| » Machinery & Tools/Heavy Equipment |
|
|
|
[Sell] Symons cone crusher/ crusher/stone crusher/crushing machine/breaker machine |
|
|
Symons type cone crusher offer several outstanding features such as excellent tramp release system, unique hydraulic lifting system, and high crusher throw and reasonable cavity design, all of these features ensure the Symons type cone crusher can offer the unbeatable performance in secondary, tertiary and quaternary applications. If your aggregate or mining business demands the 24-hours running, high-reduction, big capacity application, you will find the Symons type cone crusher optimized for your demands. The innovations like the stable lubrication, excellent sealing feature, great abrasive material applied in key components and rugged construction effectively reduce the wear rate , extend the replacement period of the spare parts, evidently reduce the production cost in per ton hour material processed. All of these can help you to achieve the highest level of profitability.
Symons Type Cone Crusher Main Features:
1. Higher capacity and less wear costs.
2. Wide range of application suitability.
3. Easy to maintain, reduce the downtime and maintenance costs.
4. Stable running performance and easy operation.
Company Name: Henan Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com |
|
| » Machinery & Tools/Heavy Equipment |
|
|
|
[Sell] impact crusher/crusher/stone crusher/crushing machine/breaker crusher |
|
|
Impact Crusher is used in both primary and secondary crushing applications of aggregate, and in recycle crushing of reinforced concrete, asphalt and other construction and debris. VIPEAK is a reliable supplier of Impact Crusher with new design. Impact Crusher is composed of rotor, impact rack, frame, ratchet cover device, Transmission Device and other parts.
Working Principle of Impact Crusher: When the Impact Crusher works, the motor drives the rotor rotate of the Impact Crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers affect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being re-crushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process will not stop till the material are crushed to the required size and then discharged from outlet of the Impact Crusher.
Characteristics of Impact Crusher:
Excellent cubic final products
Special structure
Non-key connection
High chrome hammer
Durability in long time simplicity in operation
Easy adjustment, high reduction ration
Good performance and high reliability
Company Name: Henan Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com |
|
| » Machinery & Tools/Heavy Equipment |
|
|
|
[Sell] jaw crusher/crusher/stone crusher/crushing machine/mobile |
|
|
Jaw Crusher is one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa. It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc. Many models are available according to your different fineness requirements.
Main structure of Jaw Crusher:
Jaw Crusher mainly consists of main frame, eccentric shaft, belt wheel, flying wheel, movable jaw plate, side board, toggle plate, back seat for toggle plate; gap adjusting screw, returning spring, fixed jaw plate, movable jaw plate and so on. The toggle plate also plays the role of protecting.
Working Principle of Jaw Crusher:
Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.
Company Name: Henan Zhen Zhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com |
|
| » Machinery & Tools/Heavy Equipment |
|
|
|
[Sell] Ball mill/mill/grinder mill/mill machine/crushing machine |
|
|
Ball Mill is an efficient tool for grinding many materials into fine powder. The Ball Mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine. To use the Ball Mill, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
Advantage: provide reasonable product selection and design, scientific workshop manufacturing arrangements, strict production process, on time delivery
Quite simply, the longer the Ball Mill runs, the finer the powder will be. Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the Ball Mill runs. Our Ball Mills have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, powder various chemicals, and make Black Powder.
Company Name: Henan Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com |
|
| » Machinery & Tools/Heavy Equipment |
|
|
|
[Sell] Straight Centrifugal Grinder/grinder/powder grinder/grinder machine/grinder mill |
|
|
Straight Centrifugal Grinder from Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd, is widely used in mining, chemical ,metallurgy industry, which can grind the carborundum, zirconite, quartz, granite, barite, marble, limestone, talc, gypsum, slag, porcelain, glass and other more than 200 kinds of materials that Moh hardness is below 9.5, non-explosive, non-flammable minerals. The final products can be adjusted as required between 0 and 2.8 m
MGZ series straight centrifugal grinder a kind of mill to meet the demand of customers who want to do the coarse powder processing . Based on our expert’s year’s research experience in the grinding mill, it is the ideal equipment to replace Raymond mill, ball mill, and other traditional mills which only process fine powder. It is widely applied in quartz sand, silica sand, foundry sand , fine sand and other sand abrasive industry. Being a component of closed production line, it can produce various size products with better effect.
Company Name: Henan Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com
|
|
| » Machinery & Tools/Heavy Equipment |
|
|
|
[Sell] HGM series three-rings medium-speed micro-powder grinder/grinder/grinder machine/powder grinder |
|
|
HGM series of three-rings and medium-speed micro powder grinder is a new type of making micro powder machines through more than twenties times research and improvement, depending on two decades of hard work & experience and inputting the latest mechanical techniques of Sweden. It is an incorporated one of the two countries and a leader of the grinding industry nowadays.
Usage:
HGM series of three-rings and medium-speed micro powder grinder is widely used in making fine powder or micro powder, and the raw materials should be non-inflammable and non-explosive under the Mohs hardness less than 6 grade such as limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore, etc. The lifetime of spare parts is relied on the hardness of raw materials, and is lowered once the Moh's hardness is up to 4-6 grades.
Main features:
1, High efficiency and lower consumption. In the condition of the same material, power and the fineness, its capacity is increased by 40% compared to the jet mill and mixing grinder.
2, Longevity. In the condition of the same power and the fineness, the spare parts have a longer lifetime, usually more than one year, to the shaft impactor crusher and the turbine crusher.
3, Non-bearings and non-bolt in the grinding chamber. Because of this, these questions destroying the machines can never exist for bearing, sealing element or the bolts loose.
4, The fineness of final products can add up 5μm, and screening rate is 97%.
Company Name: Henan Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com |
|
| » Machinery & Tools/Equipment |
|
|
|
[Sell] high pressure micro-powder grinder/grinder/grinding mill/powder grinder/grinder mill |
|
|
On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden, High Pressure Micro-powder Grinder Mill, the latest industrial micro-powder grinding mill, is a new type grinding machine for producing micro-powder. High Pressure Micro-powder Grinding Mill can grind calcite, limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore and other more than 200 kinds of materials that Moh's hardness is below 6, non-explosive, non-flammable minerals.
Features of High Pressure Micro-powder Grinding Mill:
Energy-saving
Wide Application Range
Good craftsmanship
Powder Fineness: <6.5um~<12.5 um
Three-dimensional structure
Centralized control for the electric system, convenient to operate.
Company Name: Henan Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com
|
|
| » Machinery & Tools/Equipment |
|
|
|
[Sell] Raymond mill/mill/grinder mill/powder mill/mill machine |
|
|
Raymond Mill is suitable for producing minerals powder, which is widely used in the metallurgy, building materials, chemical, and mining industry. It can be used for grinding barite, calcite, potash feldspar, talc, marble, ceramic, glass and some other material that Moh hardness degree is below 7, humidity is in 6%, and non-flammable non-explosive minerals. The final product size is adjustable as required in the range of 100-325 meshes. Raymond Mill is made up of the Mainframe, Separator, Pipeline System, Air Blower, Jaw Crusher, Hopper Elevator, Electromagnetic Vibrating Feeder, and Electric Control Motor and so on.
Working Principle of Raymond Mill: First material should be crushed into the desired size by Jaw Crusher, and delivered to the Silo by Bucket Elevator. Our Designed Vibrating Feeder will feed the material into the grinding room. With the air current from the Air Blower, those powder conforms to the fineness degree will be blew into the cyclone collector and those powder that is not consistent with the desired size will return to the grinding room to be re-ground. The whole system is airtight circulation, and the circulatory flow under the negative pressure.
Raymond Mill features:
1. Three-dimensional structure
2. Land-saving
3. The screen-passing rate can reach to 99%.
4. The transmission is steady and reliable.
5. The transmission device of mainframe adopts airtight gear case and zonal wheel.
6. Centralized control for the electric system, convenient to operate.
Company Name: Vipeak Heavy Industry Machinery Co., Ltd
TEL: 86-371-67770550
Email: ningzurui1@hotmail.com
Msn: ningzurui1@hotmail.com
<a href="http://www.grinderpro.com/">crusher</a> <a href="http://www.crushingmill.com/">jaw crusher</a> |
|
| » Machinery & Tools/Machinery |
|
|
|
|
|
Pages: 1
|
|
|
|
|
