|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology Co., Ltd. |
| Contact Person: |
Miss. Rose Luo |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller, etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers\' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
Customers and distributors from around the world are welcomed to negotiate with us for business cooperation. Let\'s join hands and strive for mutu al prosperity.
|
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. General & Leisure Goods/Gifts
2. Arts & Furniture/Crafts
3. Arts & Furniture/Decoration
4. Building & Construction/Stone & Cement
5. Chemicals/Plastics
6. Chemicals/Rubber
|
|
|
|
Offers
From This Member (3) |
|
|
|
[Sell] Shoe mold silicone rubber |
 |
|
Shoe mold silicone rubber
A. mainly used for shoe soles mold making
B. Two-component silicone rubber with tin-catalyst
C. Cured under room temperature
D. low shrinkage
E. excellent flexibility and easy demould
Shoe mold silicone rubber applications
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
Shoe Mold Silicone Rubber features:
A. Two-component silicone rubber with tin-catalyst
B. Cured under room temperature
C. low shrinkage
D. excellent flexibility and easy demould
Shoe Mold Silicone Rubber Using Instruction:
The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for desiring to remove the bubbles. After desired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Notes:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicone, mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Mold making silicone rubber |
|
|
Brief description:
Mold making silicone rubber:
1. Resistance to deformation, high-temperature
2. High reproduction times
3. Good tensile strength
4. Exceptional fluidity and good operability.
Detailed description:
Mold making silicone rubber
Mold making silicone rubber applications
Mold making silicone rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Mold making silicone rubber description
Mold making silicone rubber is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] manual molding silicone |
|
|
Brief Description/Features of Manual Molding Silicone Rubber
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly u, sed for model design of manual mold, PVC plastic molds, cement products, low melting point alloy moldsalloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment ant vibration, etc.
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment ant vibration.
c. Operation Instructions for Manual Molding Silicone Rubber
RTV-2 Manual Molding Silicone Rubber is a flow able liquid, and the quality has nothing to do with the color. It consists of two commonest. Part A is a flow able liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum zing, it will not be operated.
FAQ of manual molding silicone rubber –
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, and then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or an unsmoothed surface, you should polish and clean the products, after which it will be molded, then spray the release agent. Normally, the release agent can be Vaseline, detergent, liquid wax, etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pours the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
|
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
