The basic set of PET Blowing Semi automat including
the PET blowing semi automat and a rotary preform
heater. PET bottles are manufactured from
PET-preforms by means of heating them with
infrared rays and subsequent blowing by means
of compressed air with pressure of 13-15 bar.
CHARACTERISTIC (PAV-600)
Blowing unit
Blowing Semiautomat, l 0.1 - 5.0
Capacity, bottles per hour 600
Preform wall thickness, mm 2,8 - 3,4
Closing mould device knee type mechanism
Work parts activator type pneumatic
Operation pressure of pneumatic
system, bar 0,63 - 0,8
Blowing work pressure, bar 1,3 - 1.5
Air expended, cubic meter per minute 0,9
Power, kW 0,05
Voltage 380 V, 50 Hz
Size, mm 1150 x 1510 x 490
Mass, kg 450
Heating unit
Line speed of preform transporter
m per min. 0,6 - 1,4
Activator type reductor -engine NMRV i =100
Number of transporting heads 35
Tunnel type rotary conveyor
Number of heating level 5
Number of heating elements 10
Power, kW 5,5
Voltage 380 V, 50 Hz
Size, mm 1164 x 1160 x 482
Mass, kg 220
The equipment produced by our company is distinguished
by its simplicity and simultaneous precision of
engineering solutions, perfection of design, high quality
of fitting, parts produced by world famous manufacturers
(FESTO, MITSUBISHI, OMRON, LOVATTO,
MOTOVARIO, etc.) with a low cost resulting from mass
production.
13500 - 15000 EUR
|
