|
|
|
Company Name: |
green Hong Ye Jie Technology Co., Ltd. |
| Contact Person: |
penny91 pen |
| City: |
shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers ,special silicon for manual molding ,shoe mold rubber, pad printing silicon ,silicon oil ,107 base , DMC etc for plastic toys factories , With a product line of tens of categories ,we can offer quick copying with precise contraction ratio(up to two thousandth) for mold making .to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust. |
| Business Type: |
Exporter, Manufacturer |
| Areas of
Interest: |
1. Building & Construction/Construction
2. Chemicals/Rubber
3. Raw Materials/Stones
|
|
|
|
Offers
From This Member (5) |
|
|
|
[Sell] Liquid Silicone for Injection Molding |
 |
|
Keywords
Injection molding silicone,
baby nipples silicone rubber ,
liquid silicone rubber ,
cake molds silicone,
silicone for sealing elements,
Model number:
HY-923
Description:
Liquid Silicone for Injection Molding is a two-component liquid silicone rubber for injection molding processes. The silicone rubber shows a higher productivity, high transparence, less yellowing and low volatile contents. It would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Applications:
Because of the outstanding properties, The liquid silicone rubber for injection molding is particularly suitable for the following elastomeric articles: baby nipples, medical tubs, cake molds, food molds, sealing elements, O-rings, stoppers, diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
Specification:
Vulcanisates consisting of liquid silicone rubber are distinguished by the following properties:
?High productivity, high transparence
?High flowability, low viscosity and short injection time.
?Low volatiles content; Fast cure
?Excellent mold release, Excellent Thermal stability
?Excellent compression set; Excellent resilience
?High stability to ozone and ultraviolet light
?Outstanding resistance to ageing
?Not readily combustible, does not melt or drip
?Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Processing Recommendations
Ready-to-use mixtures (of the components A and B) are fed directly to the injection molding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230?C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
Shelf life
Correctly stored in its original unopened container at room temperature (24?C). The liquid silicone rubber has a shelf life of 6-8 months from the date of manufacturing. Containers, which have been opened, must be kept tightly closed afterwards
Package
20kg/drum part A + 20kg/drum part B and 200kg/drum part A + 200kg/drum part B.
Need any help on silicone rubber, please feel free to contact Ms penny:
Tel: 0086-0755-89948294
Mob:0086-0755-18823707214
E-mail: hyxe(at)szrl(dot)net
Skype:penny9110
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Liquid silicone rubber for insole making |
|
|
Model number:
E610, E620, E625, Q610 Q620, Q625 silicone rubber
Key words:
Silicone insole,
shoe insole silicone rubber ,
shoe sole silicone rubber,
insole liquid silicone rubber,
liquid silicone rubber for insole,
shoe insoles silicone rubber,
Specifications of liquid silicone insole
1. Comfortable and durable Silicone Gel Insole
2. Ideal for any type of activity sports
3. Be washable and reusable
4. Anti-silo heel pads
5. Provide heel support, extra-cushioning and stability
6. Protect and prevent impact on the heel bone
7. Relax foot
8. More healthy, therapy product
9. Eco-friendly and environmental-friendly product
10. Shock-absorption silicone rubber
Description of liquid silicone rubber for insole making
Liquid silicone rubber for insole making is a kind of addition cure silicone rubber. It is primarily intended for silicone insole as a kind of foot care silicone rubber. With two component silicone rubber part A and part B, mixing ratio is 1:1. Generally the color is translucent or transparent.
Storage of liquid silicone rubber for insole making
Liquid silicone rubber for insole making is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package of liquid silicone rubber for insole making
5kg/drum, 20kg/drum and 200kg/drum
Shelf-life of addition cure silicone rubber
Twelve (12) months under room temperature 25 Celsius.
Need any help on silicone rubber, please feel free to contact Ms penny:
Tel: 0086-0755-89948294
Mob:0086-0755-18823707214
E-mail: hyxe(at)szrl(dot)net
Skype:penny9110
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Skin Tone Silicone Rubber for Love Dolls |
|
|
Keywords
silicone dolls,
skin tone silicone rubber ,
silicone rubber for love dolls ,
silicone rubber for body organs ,
Skin Tone Silicone Rubber for Love Dolls
Model Number
HY-E605 silicone rubber
Application of Life Casting Silicone
It is mainly used to make soft silicone products , such as sex toys, silicone dolls, love dolls, silicone mask, body organs, body breast enhancers, shoulder pads, paster, trackion , mask, etc.
Features of the life casting silicone rubber
The life casting silicone rubber can be used for a long period and maintain softness and elasticity within a temperature range of -65?C ~ 200?C with the characteristics of excellent electrical performance and chemical stability, waterproof, ozone and climate resistance, non-corrosiveness, physical inertia, non-toxic, odourless, low linear shrinkage, easy operation, etc.
Using instructions of the life casting silicone rubber
Mix component A and component B evenly according to the mixing proportion of 1:1, and can be poured after deair the bubbles. The operating time (5-10) mins depends on the temperature; the curing time is 20-30 mins at the room temperature; and the curing time can be reduced to 10 minutes with the temperature increased to 80~120?C. The operating time of the room temperature quick drying type is less than 20 minutes and the curing time is 0.5 hour. The product can be produced in skin color, yellow, etc. according to the customer's requirements.
Precautions of the life casting silicone rubber
Life casting silicone rubber is platinum-catalyzed silicone rubber, water, impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur, phosphorus and nitrogen will influence the vulcanization of the silicon rubber. So, please do not mix with or touch those substances during using.
Package of the life casting silicone rubber
5kg/drum, 20kg/drum and 200kg/drum
Transportation regard as non-hazardous goods, with shelf life of half year, hermetically sealed, with prevention from being in contact with acid, alkaline, and other impurities.
For more information , pls feel free to contact Ms penny
office no. :0086-755-89948294
Mob:86-18938867517
Skype: penny9110
Email :hyxe(at)szrl(dot)net
Welcome to our website 3w dot szrl dot net
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Addition cure silicone rubber |
|
|
Key words:
Addition cure silicone rubber
addition silicone
addition molding silicone
platinum cure silicone rubber,
platinum cure food grade silicone,
Model Number:
HY-E620, HY-E630, HY-E642
Brief introduction of addition cure silicone rubber:
Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making and so on. It is nontoxic and with very low shrinkage.
Applications of addition cure silicone rubber:
Addition cure silicone rubber is a kind of food grade silicone rubber. It is primarily intended for cake mold, candy mold, chocolate mold and other food grade silicone mold, also intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Features of addition cure silicone rubber:
1. Two-component silicone rubber with platinum catalyst
2. Simple mixing ratio with 1:1 dosage
3. With high transparency, tensile strength, and tear strength.
4. Nontoxic & reach to Food grade
5. With good heat stability and weather ability ( temperature resistant range of -60-250 C)
6. With heat-ageing resistance
Storage of addition cure silicone rubber:
Addition cure silicone rubber is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 9 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package of addition cure silicone rubber:
5kg/drum, 20kg/drum and 200kg/drum
Shelf-life of addition cure silicone rubber:
Twelve (12) months under room temperature 25 Celsius.
Need any help on silicone rubber, please feel free to contact Ms penny:
Tel: 0086-0755-89948294
Mob:0086-0755-18823707214
E-mail: hyxe(at)szrl(dot)net
Skype:penny9110
|
|
| » Chemicals/Rubber |
|
|
|
[Sell] Electronic potting compound silicone rubber |
|
|
Model Number:
HY-9300, HY-9315, HY-9325
Brief Introduction
Electronic potting compound silicone rubber is a code of addition cure silicone rubber, which is similar to KCC potting silicone rubber. It has a low viscosity and mixing ratio 1:1, easy in operation and pourable. The electronic potting compound silicone rubber is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and anti-vibration.
Applications of Electronic potting compound silicone rubber
The potting silicone rubber is a kind of low viscosity, Inherent flame resistance, two components silicone rubber with heat-conducting. It can cure in both room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved. It mainly applied in electronic components surface with materials of PC (Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
Operation of Electronic potting compound silicone rubber
1. Put part A and part B in separate container with equal dosage and stir evenly when mixing the two parts together.
2. Put the mixture into the vacuum machine under 0.08 MPa for 5 minutes.
3. The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Storage of Electronic potting compound silicone rubber
The potting silicone rubber is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package of Electronic potting compound silicone rubber
5kg/drum, 20kg/drum and 200kg/drum
Need any help on silicone rubber, please feel free to contact Ms penny:
Tel: 0086-0755-89948294
Mob:0086-0755-18938867517
E-mail: hyxe(at)szrl(dot)net
Skype:penny9110
|
|
| » Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|
|
