|
[Sell] Cable Stripper and Cutter,hydraulic tools,hand tools |
 |
|
Model No.: HS-206A
Cable Stripper and Cutter for Electrician
Coax crimping Max cutting:RG-174./RG-9
Capacity(mm2):Below 30
Attention:it couldn't be used to cut steel wires and coper hard dran wires
Hardened ,red cusnioned hadles
AWG: 8
Length(mm): 165
Weight(kg): 0.14
Attention:it couldn't be used to cut steel wires and coper hard |
|
| » Machinery & Tools/Hand Tools |
|
|
|
[Sell] hydraulic gear puller,hydraulic tools |
|
|
Item: Integral-unit hydraulic gear puller
Item no.: CK Series
Description:
Using new type hydraulic gear puller is convenient for operating;
Workers can exchange two jaws and three jaws freely in the scene working;
The puller can be touched working center quickly after rotary according to the distance between puller and piston center;
It can choose pump freely;
The jaws with three can be adjusted from high to low point. |
|
| » Machinery & Tools/Machinery |
|
|
|
[Sell] hydraulic pipe bender,hydraulic tools |
|
|
Item: Split unit hydraulic pipe bender
Item no.: CPB Series
Description:
It is suit for common water pipe, wire pipe, carbon steel pipe, thick wall conduit tube, bend the angle with 90 degree;
1/2＂-2＂can be shaped 90 degree on time, 2 1/2＂-4＂can reach suitable radian which must remove pipe and bend pipe five times. |
|
| » Machinery & Tools/Hand Tools |
|
|
|
[Sell] Hydraulic crimping tool,hand tools,power tools,hydraulic tools |
|
|
Item: Hydraulic crimping tool
Item no.: CPO-400
Description:
Design to accommodate hexagonal, circular shell and indent type dies for applying compression fittings to copper, aluminum and ACSR conductors;
Two stage pumping action for rapid ram advance to the connector hold position with minimum pumping action;
Automatic bypass when 700kgf/cm2 of oil pressure is reached;
The glass fiber operation insulates stick, can bear the electric voltage 20kvs, keeping on five minutes;
180 degree rotate head;
The pressure outside the body adjusts to press the valve, do not need the whole structure to tore down;
Comes complete with double molded plastic case.
Model :CPO-400
Range (mm2): Up to 250 copper Conductor size
Output (T): 13
Stroke (mm): 22
Storage oil (cc): 145
Mould (mm2): 50, 70, 95, 120, 150, 185, 240, 300, 400
Voltage (V): 20,000 V/min
Weight (kg): 6.3 |
|
| » Machinery & Tools/Power Tools |
|
|
|
[Sell] Hydraulic crimping tool,hand tools,hydraulic tools |
|
|
Item: Hydraulic crimping tool
Item no.: CPO-300B
Description:
Press tools is suitable for DIN, AWG, JIS;
There is a safe protective equipment of kacha voice when it reaches to high or low voltage;
Only one person can work;
Pump is connected to the tools, it can turn 180 degree when pressed on the head.
Model :CPO-300B
Range (mm2): Al Terminal 10-240
Cu Terminal 16-300
Output (T): 13
Stroke (mm): 22
Mould (mm2): 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300
Crimping type: Hexagon |
|
| » Machinery & Tools/Hand Tools |
|
|
|
[Sell] Hollow plunger cylinder,hydraulic tools,power tools |
|
|
Item: Hollow plunger cylinder
Item no.: RCH Series
Description:
Hollow hunger design allows for both pill and push forces;
Single-acting spring return;
Baked enamel finish for increased corrosion resistance;
Collar threads for easy installation. |
|
| » Machinery & Tools/Machinery |
|
|
|
[Sell] puncher hole machine,hydraulic tools |
|
|
Item: Hydraulic puncher hole machine
Item no.: CH-70
Description:
CH-60、CH-70 hydraulic puncher hole machine is specialized for the hole digging of corner steel、flat steel、brass plate and other metal material, especially for electric power building and other industry filed operation;
SYD-35 metal digger is an advanced hand hydraulic tool which can dig the holes in the stainless steel sheet with the thickness less 1.5mm the press equipment can not do like this, easy operation, force-saving, quick; Smooth finished surface, not limited by place and location.
Model: CH-70
Thickness (mm): 12
Output (T): 35
Depth of throat (mm): 110
Weight (kg): 28
Mould (mm): 3/8＂(Φ10.5), 1/2＂(Φ13.8), 5/8＂(Φ17), 3/4＂(Φ20.5)
Remark: Can match CP-700 or ZCB-6-5 |
|
| » Machinery & Tools/Machinery |
|
|
|
[Sell] Hydraulic cutter,cutting tools,hand tools |
|
|
Item: Hydraulic cutter
Item no.: CPC-20A
Description:
Cutting head provide fast cutting with remote operation;
All units can be operated by any hydraulic pump with the maximum oil pressure of 700 kg/cm2 (10,000);
All units are equipped with PT 3/8 high pressure couplers;
PT-NPT adapters are available on request for NPT 3/8 treaded couplers;
Guillotine type cutters feature less jamming than shear type cutters;
No set-up time required;
All blades are easily replaceable;
180 degree rotate heads allow easy cutting position. |
|
| » Machinery & Tools/Hand Tools |
|
|
|
[Sell] Crimping pipe tool,hand tools,power tools |
|
|
Item: Crimping pipe tool
Item no.: CW-2540
Description:
Crimp copper pipe, stainless steel pipe and cooper pipe sleeve. It is also used of crimping the water pipe, electric pipe and chemical pipe.
Model: CW-2540
Output (T): 8
Range: 25-40
Mould (mm): Φ25, Φ32, Φ40 |
|
| » Machinery & Tools/Hand Tools |
|
|
|
[Sell] Screw destroyer,hydraulic tools,electric tools |
|
|
Item: Screw destroyer
Item no.: FYP-41
Description:
When the nuts get rusted, this nut cutting machine is the most time-saving, force-saving tool, no need power;
You also can choose YP-24 for over head working, only need one person;
Match pump CP-180、CP-700、CFP-800.
Model: FYP-41
Max. cutting force (T): 20
Max. travel (mm): 20
Size of nut: M22-M27
Length (mm): 260
Weight (kg): 4.5 |
|
| » Machinery & Tools/Hand Tools |
|
|
|
[Sell] steel cutting tool,cutting tools,power tools |
|
|
Item: Hydraulic electric steel cutting tool
Item no.: RC-16 / RC-22
Description:
Model: RC-16 RC-22
Range (mm): Φ4-Φ16 Φ4-Φ22
Speed: 2.3 3.5
Voltage: 110V/60Hz
220V/50Hz
Watt (kw): 1.05 1.6
Dimension (mm): 460×150×115 500×160×150
Weight (kg): 12.5 18.5 |
|
| » Machinery & Tools/Power Tools |
|
|
|
[Sell] Angle iron cutting tool,hydraulic tools,cutting tools,bending tools |
|
|
Item: Angle iron cutting tool
Item no.: CAC-100
Description:
CAC series is specialized in cutting angle iron;
The tools has the advantage of quick cutting, no scrap iron, smooth surface of cutting flat;
It is suit for using in bridge,high pressure of iron tower and anyplace where need use such tool;
It can work outside, convenient carry and simple operation. Match pump CP-700,CP-700-2A,CFP-800,DYB-63A.
Model: CAC-100
Output (T): 30
Range (mm): 100 ×100 ×10
Dimension (mm): 320 ×190 ×450
Weight (kg): 31 |
|
| » Machinery & Tools/Equipment |
|
|
|
[Sell] Split-unit hydraulic pliers |
|
|
Item: Split-unit hydraulic pliers
Item no.: CO-300
Description:
It is suitable for outside and inside project of the distributor house. It is the special tools for all kinds of connecting and kinds of connecting and building over head cable;
It pressed tightly on 10kv-500kv high voltage cable casing pipe, cable clips ends and hexagon shape;
We will develop the titanium alloy material to decrease the work deal, match pump CP-180,CP-700, CP-700-2A, CFP-800, DYB-63A;
Welcome to order special specification tools.
Model: CO-300
Range (mm2): Al 10-240
Cu 16-300
Output (T): 13
Stroke (mm): 22
Standard mould (mm2): 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300
Crimping type: Hexagon |
|
| » Machinery & Tools/Hand Tools |
|
|
|
[Sell] line production machine,cutting tools,bending tools,punch |
|
|
Item: Multi-functional line production machine
Description:
1, This is a function of the body composition of a number of professional design, perfect to avoid consideration of human waste, that is, in working hours, with consistent operating procedures, personnel engaged in handy, have a high efficiency, high-quality works perfectly;
2, Overall shape bright colors, paint the surface and the skin-phosphate rust-proof handle, wear-resistant impact;
3, Mirror handle the face, after grinding desktop and chrome, showing the precise smooth face;
4, Four position switch precise valve control guidelines, is the correct use of punching machine, bend board tools, cutting tools location;
5, Foot switch security firm, can control the import and return to oil; |
|
| » Machinery & Tools/Heavy Equipment |
|
|
|
[Sell] Hydraulic compression head CO-100S |
|
|
Item: Hydraulic compression head
Item no.: CO-100S
Description:
Super quality and high ability of anti-tension because of the high carbon steel material and CNC computer process;
Tools can calculate the compress scale according to the object;
Single return can match single return pump 100 Ton、double return matches CTE-25AD pump or Japanese double return control pump;
When work outside, it can match engine generator or engine pump 8-12 seconds every time, quick and safe;
The metal tools are made according to national standard.
Model: CO-100S
Output (T): 100
Piston travel (mm): 24
Weight (kg): 33
Dimension H×W (mm): 370×180
Use scale (mm): Cu Al 76 mm
Steel 36 mm
Remark: CTE-25AD |
|
| » Machinery & Tools/Power Tools |
|
|
|
[Sell] Electric pump,hydraulic tools,power tools |
|
|
Item： Electric pump
Item no.：CTE-25AS
Description：
Use 2M high pressure oil tube, with fast connection point;
Use R32 super circulation oil or SHLL T-15;
Output pressure 700kg/cm2 10,000 psi;
PT 3/8＂pipe connection;
Single return route;
Oil must be changed every half year; |
|
| » Machinery & Tools/Pumps |
|
|
|
[Sell] Hydraulic hand pump,hydraulic tools,pump |
|
|
Item: Hydraulic hand pump
Item no.: CP-700
Description:
Use 2M high pressure oil tube, with fast connection point;
Use R32 super circulation oil or SHLL T-15;
PT 3/8 pipe connection;
Oil must be changed every half year;
Model: CP-700
Max. output (Kg/cm²/psi): 700/10,000
Output (psi): Low pressure 350
High pressure 10,000
Storage oil (cc): 900
Weight (kg): 9 |
|
| » Machinery & Tools/Pumps |
|
|
|
[Sell] Cable Stripper and Cutter |
|
|
Model No.: HS-206
Cable Stripper and Cutter for Electrician
Coax crimping Max cutting:RG-174./RG-9
Capacity(mm2):Below 30
Attention:it couldn't be used to cut steel wires and coper hard dran wires
Hardened ,red cusnioned hadles
AWG: 8
Length(mm): 165
Weight(kg): 0.14 |
|
| » Machinery & Tools/Hand Tools |
|
|
|
[Sell] Energy Saving Crimping Pliers,hydraulic tools,hand tools |
|
|
Model No.: AP-26TW
New Generation of Energy Saving Crimping Pliers
Range of application: Wire-end ferrules
Capacity(mm2):2×0.5-6
AWG: 2×20-10
Length(mm): 250
Weight(kg): 0.55 |
|
| » Machinery & Tools/Hand Tools |
|
|
|
|
|
Pages: 1
|
|
|
|
