|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
Security Mesh |
| Description: |
Security Mesh
Perforated stainless steel mesh provides an impenetrable barrier for the doors. The perforated holes bring the effect of a slightly tinted window view and complete security.
Stainless Steel Security Mesh is used where further security for the door is needed, or where the door design is of a more open pattern.
Perforated patterns for the security mesh: Round, diamond, cross, slotted or decorative openings.
Materials: Stainless steel 304, or stainless steel 316.
Perforated metal mesh thickness: Can be custom made to meet specific requirements.
Metal mesh length and width: According the door size requirements.
Different perforated metal applications in different countries with different customers require different solutions. Flexibility is therefore the key to our success.
There are abundant choices of patterns and hole sizes. The manufacturing capabilities include a vast array of materials – perforated aluminum, perforated stainless steel, brass, titanium, and others. Parts in coil, sheets or as completely fabricated parts can be supplied.
Material thickness:
Thinner materials typically perforate easier and faster, and are often less expensive. The right material thickness provides sufficient strength to the product while allowing the perforating of the desired hole size.
Hole size:
In general it is advisable to use a hole size larger than the metal thickness. The closer the hole size and material thickness come to a 1 to 1 ratio, the more difficult and expensive the process is. Dependent on the material type, smaller hole size to material ratios can be achieved. Contact your Sales Representative to discuss your special requirements.
Hole shape and pattern of the security mesh:
It is more economical to choose one of the available patterns, although special hole sizes and patterns can be accommodated at additional cost.
Send Email or Fill in the Feedback Form on this Page to Get Professional Services and Quick Responses from WireMesh.Org Members engaged in Security Mesh.
|
| Placement Date: |
Nov 18, 2009 |
| Expiration Date: |
Nov 18, 2010 |
|
|
|
|
|
|
Company Name: |
Wire Mesh International |
| Contact Person: |
guoqing |
| City: |
Xinping, Ronghua Street, Hengshui City, Hengbei Province, P. R. |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Woven Wire Mesh Sieve
Test sieve meshes are produced to minimal tolerances using specially designed looms, giving highly precise results for both test and production processes.
Our products are manufactured using high alloyed stainless steels, guaranteeing advanced resistance to corrosion and easy cleaning.
Wire mesh sieves are used in the following industries:
Sieving and fractionating of foundry and form sand
Concrete production
Production of washing powder
Production of foodstuffs
Chemical and pharmaceutical processes
Research and development
WireMesh.Org members supply wire mesh sieves in all mesh types, sizes and frame materials. In addition to the full range of wire mesh sieves, we also supply top quality stainless steel woven wire and perforated plate test sieves at very competitive prices.
Half-height Wire Sieves: Available in diameters of 100, 200, 300mm and 3, 8 and 12 inches with the complete range of woven wire mesh or perforated plate sieving mediums. Half-height sieves are the same price as full-height sieves.
Perforated Plate Sieves: For aperture sizes 1mm and larger, perforated plate sieves are available in addition to the woven wire series. Commonly perforated metal sieves are supplied in round holes.
Woven Wire Sieves: Occasionally brass woven wire mesh is used in place of stainless steel woven wire mesh. Woven wire mesh is supplied with or without a reinforced backing mesh.
Laboratory Test Sieves: A test sieve is a measuring instrument and should not be maltreated. Sieves should be used with care, cleaned regularly and stored in a safe dry place. Care should be taken when sieving certain chemicals, especially hygroscopic salts, which can affect brass sieves. Always wash and dry the sieves after each test. For the sizing of substances which are liable to corrode brass, we recommend the use of stainless steel sieves. Particles should never be forced through a test sieve - even the gentle brushing of material through the finer meshes is undesirable, but this procedure is occasionally unavoidable for certain materials that are otherwise difficult to sieve.
Metal framed sieves should afterwards be rinsed thoroughly in clean water and dried quickly in a warm atmosphere. (To avoid possible mesh distortion, metal framed woven wire sieves should not be heated above 80 deg C) Sieves that have been used for wet sieving should not be allowed to dry-out before attempting to clean them.
Application:
Chemical products
Foodstuffs and spices
Stones and powders
Pharmaceutical products
Paper
Metal powders
Rubber
Fertilizers
Sugar and salt (sizing)
Recycling
Many others
Materials: Wire meshes for sieves are produced primarily using stainless steel (AISI 304) or (AISI 316).
Send Email or Fill in the Feedback Form on this Page to Get Professional Services and Quick Responses from WireMesh.Org Members engaged in Wire Mesh Sieves.
|
| Business Type: |
Exporter |
| Areas of Interest: |
1. General & Leisure Goods/Gaming & Gambling
|
|
