|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
industrial gears and gearboxes |
| Description: |
Hardened and Profile Ground Spur, Helical Gears and Pinions
• upto 10 Module/2.5 DP
• Outer Diameter upto 540 mm/21"
• Face Widths upto 200 mm/8"
• Pinions are generally made from EN 353 case Hardening Steel and Gears are generally made from SAE 8620 Case Hardening Steel. Other metals like 20Mn5Cr5, EN 36 or EN 24, EN 19 full hardening steel can be taken for good quantities
• They are case carburised, Hardened and Tempered to HRC 55-60.
• They are then accurately ground. Teeth Flanks are ground on Teeth Profile Grinding Machine
• for Automobiles and Industries
• Custom made as per Specifications, Drawing or Sample
Internal Spur and Internal Helical Gears and Pinions
• Upto 10 Module/2.5 D.P.
• Outer Diameter Upto 1000mm/39"
• Face Widths upto 200 mm/8"
• In Mild Steel, Stainless Steel, Alloy Steel, Hardened and Tempered Steels, Case Hardened Steels, Cast Iron, or other materials like Hylam as specified
• for Automobiles and Industries
• Custom made as per Specifications, Drawing or Sample
• used in industrial sectors such as Cement Plants, Sugar Mills, Sponge Iron Plants Fertilizer plants, Thermal Power Station, Mineral Plants, Chemical Plants, Paper Mills, Mining Industry, Steel Rolling Plants.
Worm Shafts
• Upto 10 Module/3 D.P.
• Outer Diameter Upto 300 mm/12"
• Face Widths upto 500 mm/19"
• In Single or multi starts
• Center Distance from 25mm/1" to 500mm/20"
• Generally Worm Shafts are made from EN 353, Case Carburised, Hardened and Tempered upto 55-60 HRC.
• They are then accurately ground. Tooth Flank are ground on Worm Profile Grinder
• Also offered in other metals with or without hardening like in Mild Steel, EN8, EN 19, EN 24, Cast Iron or as specified
• standard and custom made as per Specifications, Drawing or Sample
• Worm shafts like for Worm Gear Boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-Stock (Subject to conformation).
• For Automobiles and Industrial uses
• Worm Shaft and Worm Wheel Pairs are suitable for power transmission in right angle
• Reverse engineering of Gear sets and Gear Boxes
Worm Gears
• Upto 20 Module/1.5 D.P.
• Outer Diameter Upto 2100mm/80"
• Face Widths upto 800 mm/31"
• In Single or multi starts
• Center Distance from 25mm/1" to 500mm/20"
• In Cast Iron, Bronze (PB2S), or as specified
• Optionally available Custom made as per Specifications, Drawing or Sample
• Worm Gears are available on very tight delivery schedules, some Worm Wheel & Worm shafts Pairs like for Worm Gear Boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ready-Stock. Other ratios are also available within One day of placing Order or on short notice (subject to conformation).
• Gear Box Overhauling and Rebuilding Services
Spur, Helical Gears and Pinions
• Upto 20 Module/1.5 D.P.
Outer Diameter Upto 2500 mm/100" in spur gear and Pinion
• Outer Diameter Upto 1250 mm/50" in Helical gears and Pinions
Face Widths upto 800 mm/31"
• Required information for quotation:
Material of Construction - steel, EN 8, EN 24, EN 353, SAE 8620 etc
• Teeth Specification - pitch in Module or DP, Helix Angle
Outer Diameter
Bore size
Key way size
Hub size if any
Any other requirement
Keywords : helical gears, worm gears, bevel gears, industrial gears, worm shaft, gear, industry, pinion, internal gears
|
| Placement Date: |
Nov 03, 2011 |
| Expiration Date: |
Nov 01, 2016 |
|
|
|
|
|
|
Company Name: |
Agro Engineers |
| Contact Person: |
Anuj Aggarwal |
| City: |
Kota |
| Country: |
India
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
An ISO 9001:2000 company: Manufacturer of gearboxes for industries such as helical gearboxes, planetary gearbox, worm gearboxes etc. and worm wheel and worm shaft, worm gear, spur, helical and bevel gear, rack and pinion, mechanical engineering power transmission equipment. We have supplied gearboxes to our customers situated in all over world. Agnee is our brand name under which we have exported industrial gearboxes of international standard.
Regards
Anuj Aggarwal (Director Marketing and Sales)
Agro Engineers
E-3, Industrial Estate
Kota-324007, Rajasthan - India
website: http://www.agroengineers.com
email: info@agroengineers.com
|
| Business Type: |
Exporter, Manufacturer, Service |
| Areas of Interest: |
1. Agriculture & Farm/Equipment
2. Building & Construction/Equipment
3. Machinery & Tools/Conveying Systems
4. Machinery & Tools/Equipment
5. Machinery & Tools/Heavy Equipment
6. Machinery & Tools/Machinery
7. Machinery & Tools/Parts
8. Chemicals/Equipment
9. Raw Materials/Mines & Minerals
10. Raw Materials/Packaging & Paper
11. Textile & Wear/Equipment
12. Food & Beverages/Equipment
|
|
