|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
Manual mold silicon rubber HY540 |
| Description: |
Manual mold silicon rubber HY540 Description:
Manual mold silicon rubber HY540 is flowing liquid with consistant quality in whatever color. It consists of two components, A is silicone rubber, and B is curing agent or vulcanizing agent. Manual mold silicon rubber HY540 is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, cultural relics duplication, shoe sole mold fabrication, pad printing positioning, electronic equipments antivibration, etc.
Manual mold silicon rubber HY540 Standard Datasheet:
Appearance White
Viscosity(cps) ≤18000
Hardness(Ao) 38±2
TensileStrength (Mpa) ≥2.0
Tear Strength (KN/m) ≥7
Elongation(%) ≥200
Mixing Ratio (%) 2~3
Pot life (H) 0.5
Demould time(H) 2~4
Manual Mold Silicon Rubber FAQ:
How to prevent silicon manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded , then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pour the silicon into the mold when the mixture is mixed evenly, then the finish silicon mold will not cure and dry entirely.
Any further information pls feel free to contact with Ms Nina
TEL: 0086-755-89948019
Fax: 0086-755-89948030
E-mail: hyjr(at)szrl(dot)net
Website: www(dot)szrl(dot)net
|
| Placement Date: |
Jun 21, 2012 |
| Expiration Date: |
Jun 20, 2017 |
|
|
|
|
|
|
Company Name: |
Shenzhen Hong Ye Jie Tech Co., Ltd. |
| Contact Person: |
Ms Nina |
| City: |
Shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Hong Ye Jie Technology Co., Ltd. was established in 1998, it is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. We sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including silicone products like silicone rubber, RTV-2 molding silicone rubber, manual design silicone rubber, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates & roller, etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions. |
| Business Type: |
Exporter, Manufacturer |
| Areas of Interest: |
1. Chemicals/Rubber
|
|
