|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
Gypsum Decorative Line Silicone Rubber |
| Description: |
Gypsum Decorative Line Silicone Rubber
•Usage: for toy gifts and craftwork gift, products with complex fine details, and made in pouring way.
Description: 　　
•HY-638# silicon rubber is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc.
•It is suitable for small products or fine and precision products which is difficult to demould.
•This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2‰.
•Applications: poly technique, lightings, candles, and molds in multiple pieces for large products.
RTV-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance.
•Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.
•The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds.
Operation instruction for RTV-2 molding silicone rubber: 　　
•The product is white or red flowing liquid with general hardness of 22—50A°after curing.
•If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness.
•On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness.
•The amount of the curing agent depends on the actual requirements of the customer.
•If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
Note:
•our company does not recommend you to add silicone oil into the silicone rubber.
•If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.
The proportions and reactions of the curing agent and the silicon are listed as follows: 　　
•Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours. 　　
•Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours. 　　
•Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.
•Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded.
For further information, please feel free to contact Mandy
TEL: 086-755-89948019
FAX: 086-755-89948030
MOBILE 189-3886-1892
Website: www(dot)szrl(dot)net
E-MAIL: hyjd((at)szrl.net
hyjmandy (at)hotmail(dot)com
|
| Placement Date: |
Sep 27, 2012 |
| Expiration Date: |
Sep 26, 2017 |
|
|
|
|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology CoLtd |
| Contact Person: |
mandy |
| City: |
shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Hong Kong Hong Ye Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers\' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
Customers and distributors from around the world are welcomed to negotiate with us for business cooperation. Let\'s join hands and strive for mutual prosperity.
Factory location
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Town, Long Gang district, Shenzhen, Guangdong
Management Certification: ISO 9000/9001/9004/19011: 2000
|
| Business Type: |
Manufacturer |
| Areas of Interest: |
1. Chemicals/Rubber
|
|
