|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
Electronic potting compound silicone rubber |
| Description: |
USD:$6.87-9.98/KG
HY 9055
Place of Origin: Guangdong China (Mainland) Brand Name: Hong Ye Silicone Rubber
Min.Order Quantity: 200 Kilogram/Kilograms
Supply Ability: 8 Ton/Tons per Day
Port: shen zhen
Payment Terms: L/C,T/T,Western Union
Packaging Detail: 25kg/drum and 200kg/drum
Delivery Detail: within 3 days after payment confirmed in our bank.
Typical Application of electronic potting compound silicone rubber:
electronic potting compound silicone rubber is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. Silicone Rubber Electronic Material for good elasticity is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
Description of electronic potting compound silicone rubber:
electronic potting compound silicone rubber is a newly insulating material
silicon of silicon compounds. It cures without heat, corrosion and just with little shrinkage.
It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Features of electronic potting compound silicone rubber:
1. No toxicity, solventless, no odor and no cure by-product.
2. Equal amount of mixing ratio, good fluidity, easy processing.
3. No significant exotherm or shrinkage during curing.
Technical Parameters of electronic potting compound silicone rubber:
Before Curing Appearence Black/Transparent Fluid
Density(25°C g/ml) 0.98±0.02
Viscosisty(25°Ccps) Part A 500±100:Part B:800±100
Mixing Ratio A:B=1:1(By weight)
Operating Time(25°C hr) 5
Curing time(80°C hr) 0.5
After Curing Hardness(Shore A) 0-40
Dielectric Strength(KV/mm) 23
Volume Resistance(Ω.Cm) 1.0×10 15
Permittivity(1.2MHz) 3.0
Temperature Resistence(°C) -60~200
Fire Resistance UL94-V1
(Pls note: all data of this product above in 25 °C with 55% humidity conditions. We don’t guarantee a same data if testing under different conditions, or when data was regenerated)
Precaution of electronic potting compound silicone rubber:
1. Twelvemonths from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is nondangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
Operation way of electronic potting compound silicone rubber:
1.Put part A and part B in separate container with equal dosage and stir evenly when mixing the two parts together.
2. Put the mixture into the vacuum machine under 0.08 MPa for 5 minutes.
3. The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
please feel free to contact Ms kaka:
Tel:86-755-89212365
Mob/Whatsapp:86-18938867528
E-mail: hykat)resinpu(dot)com
Skype:hykat)resinpu(dot)com
|
| Placement Date: |
Aug 11, 2015 |
| Expiration Date: |
Aug 09, 2020 |
|
|
|
|
|
|
Company Name: |
SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. |
| Contact Person: |
kaka long |
| City: |
shenzhen |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We are a joint venture specializing in the manufacturing of molding silicon rubber, mold duplicating rubber for resin craft makers ,special silicon for manual molding ,shoe mold rubber ,pad printing silicon ,silicon oil ,107 base ,DMC etc for plastic toys factories,With a product line of tens of categories ,we can offer quick copying with precise contraction ratio(up to two thousandth) for mold making .to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust.
It is our solemn commitment that :any of our products with quality problems will be replaced within 3 months after purchase ;we offer on site follow up service for product demonstration ,free customer service to solve technical training on pad printing silicon usage and rubber head making .What you need is also what we pursue .We are committed to back you up in producing first class products .Customers old and new and distribution and deputization .Let us join hands and strive for mutual prosperity . |
| Business Type: |
Exporter, Manufacturer |
| Areas of Interest: |
1. General & Leisure Goods/Gifts
2. General & Leisure Goods/Toys
3. Arts & Furniture/Crafts
4. Arts & Furniture/Jewelry & Imitation
5. Health & Beauty/Medical
6. Building & Construction/Architecture
7. Building & Construction/Stone & Cement
8. Chemicals/Rubber
9. Raw Materials/Fuels & Gasses
10. Computers & Hardware/Hardware Components
11. Service Industry/Health
12. Electronics & Electricals/Electronic Instruments
13. Textile & Wear/Stocks
|
|
