|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
Subject: |
RTV Manual mold silicone rubber |
Description: |
RTV Manual mold silicone rubber applications RTV manual mold silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc. RTV Manual mold silicone rubber features description The RTV manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers. Manual mold silicone rubber operations Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2% to 3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2 to 3 hours. Frequently asked questions for Manual mold silicone rubber What should we do when the air bubbles appeared in the process of mold making ? To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair . If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre- crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles. For get further information about our silicone product, PLS contact with Miss Cherry Mobile: 0086-13410795929 TEL: 0086-755-89948294 FAX: 086-755-89948030 Email: cherryyu802 (at) hotmail (dot) com hyjc(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net .anytime .
|
Placement Date: |
Mar 10, 2012 |
Expiration Date: |
Mar 10, 2013 |
|
|
|
|
|
|
Company Name: |
Shenzhen Hong Ye Jie Technology Co., Ltd |
Contact Person: |
cherry |
City: |
Shenzhen |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
We are a joint venture specializing in the manufacturing of molding silicon rubber,mold duplicating rubber for resin craft makers,special silicon for manual molding,shoe mold rubber,pad printing silicon,silicon oil,107 base ,DMC etc for plastic toys factories ,With a product line of tens of categories ,we can offer quick copying with precise contraction ratio(up to two thousandth) for mold making to reach the internationally leading quality standard with competitive price is our best ambition that merits your trust. It is our solemn commitment that :any of our products with quality problems will be replaced within 3 months after purchase ,we offer on –site follow –up service for product demonstration,free customer service to solve technical training on pad printing silicon usage and rubber head making .What you need is also what we pursue .We are committed to back you up in producing first class products .Customers old and new and distribution and deputization .Let’s join hands and strive for mutual prosperity .
|
Business Type: |
Exporter, Manufacturer |
Areas of Interest: |
1. Chemicals/Rubber
|
|