|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
Three Dimensional Panel Machine |
| Description: |
construction panels, manufactured with a 3 dimensional wire structure in a combination of 2 cover mesh layers interconnected by truss wires, with expanded Polystyrene (EPS)-insulation core. It is a compact line, whose production process takes place in two main phases:
1.) Production of three-dimensional mesh panels from steel coils by means of a fully automatic mesh welder.
- Multiple welding machine with CNC-pitch feeding system to produce the flat mesh panels
- Multiple bending and welding machine to provide flat meshes with three dimensional rods
- Horizontal conveyor to transfer meshes toward assembling machine
2.) Assembling of structural panel by means of an automatic line. It consists of following main units:
- Assembling system to press three-dimensional frames into polystyrene core
- Multiple welder with CNC-pitch feeding system to weld together structural panels
- Automatic stacking device to eject and pile up finished panel outside the line
Electric current: 75kW
Max. intermittent welding power: 50 kVA
Welding current duty cycle: 5 %
Air compressor power: 3m 3/ min o.6Mpa
Width of panels: 1200 mm
Length of panels: min. 2500 mm, longer panels in steps of 00/40mm
Insulation core thickness: 100- 40 mm
Cover mesh: 50 x 50 mm openings
Wire diameter: -1.8- -3.8 mm as standard size proposed for
load bearing walls, slabs and roofs. Plain wire quality.
Also 2 longitudinal plaster runners as V-stamp of 20 mm.
Spacer wires: In truss configuration at 100 mm or 200 mm spacing.
Wire diameter 3.8 mm galvanized wire quality.
Insulation core: EPS, destiny approx. 15 –20 kg/m3
100 mm - 40 mm thickness.
Output speed :
Based on a 300 working days per year, each with 8 hours and assumed efficiency factor of 60 % (depending on local conditions), this results in a max. net output of pprox.300.000 m2 per year and per one working shift on a thus step of 200 mm and in a max. net output of approx. 220.000 m2 per year and per one working shift on a truss step of 100 mm. Hard drawn wire for cover mesh and for splice mesh:3 mm diameter, minimum yield strength of 500 to 550 N/mm2, maximum carbon contend 0.15 %, clean wire surface, no rust, reuse, oil, paint or drawing compounds to insure smooth flow of the welding current. Galvanized wire for spacer (truss) wires:3.8 mm diameter, minimum yield strenth of 700 N/mm2, maximum carbon content 0.15 %, clean wire surface and uniform zinc coating
|
| Placement Date: |
Nov 28, 2007 |
| Expiration Date: |
Jan 01, 2010 |
|
|
|
|
|
|
Company Name: |
Guangxing EPS foam plastic machinery manufacturing Co.,Ltd |
| Contact Person: |
Sunshine |
| City: |
hengshui |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Guangxing EPS foam plastic machinery manufacturing Co., Ltd was established in 1987 is a manufacturer and exporter of EPS Machine Line, Foam Block Molding Machine Automatic Quantitative Foaming Machine, Fluid Dried Bed, Automatic Block Cutting Machine, Automatic Block Molding Machine, Three Dimensional Panel Machine, Mesh Panel Welding Machine, wire mesh machine. The company is powerful in technical force, advanced in manufacturing and integrated in equipment. It is a key enterprise engaged in series foam plastic machinery manufacturing. The Variety specifications and series of foam plastic packing moulds and foam plastic machineries which researched and designed by the company have reached the advanced standard in China. our EPS Machine Line, Foam Block Molding Machine, Automatic Quantitative Foaming Machine, Fluid Dried Bed, Automatic Block Cutting Machine, Automatic Block Molding Machine, Three Dimensional panel Machine, Mesh Panel Welding Machine, wire mesh machine, sell well in more than 30 provinces, cities and municipalities in China and have exported to the Republic of Kazakhstan, Vietnam, the Democratic People\'s Republic of Korea and Mongolia, etc. Stand by principle Credit First, Quality First as also for high quality products, advanced technology with entirely after service support to the customers from the design and research to the manufacturing and fixing, we were regarded as the’ good credit and top-class service enterprise by the consumers. We will move our foam plastic machinery to the world and China under predominant management and the latest development ideal. |
| Business Type: |
Manufacturer |
| Areas of Interest: |
1. Machinery & Tools/Machinery
|
|
