|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
Subject: |
Expanded Mesh |
Description: |
Expanded Mesh Expanded metal can be used in many metal works and it is determined from the following terms: 1. Strand: Form the sides of the expanded metal design opening 2. Bond: Where the strands intersect 3. SWD: Short Way of the Design – is the distance from the middle of the bond on one side to the middle of the bond on the opposite side. 4. LWD: Long Way of the Design – is the distance across the largest dimension measured at the center. 5. SWO: Short Way of the Opening – is the width of the opening of the shortest side of the design. SWO does not include the strand width. 6. LWO: Long Way of the Opening – is the length of the opening of the longest side of the design. LWO does not include the strand width. 7. Open Area: The total area of the design openings divided by the total area of the sheet or roll of expanded metal and is expressed as a percent. Expanded Metal for Metal Works: Woven wire and welded wire can be used for processing of metal works, while expanded metal mesh has its own benefits of using. Expanded mesh can be fabricated into the designs you want to create a feel or a sense of volume in the space by using expanded metal panels as accent borders, clouds or full ceilings. Expanded mesh is simple and safe for installation. Expanded mesh can be supplied in many metal materials such as stainless steel, aluminum, nickel, titanium, while carbon steel is one of the most important materials for using. Galvanized carbon steel expanded mesh offers good property against corrosion and rust at economic price Patterns applied include diamond, square, hexagonal and heavy type. The panel surface of expanded mesh can be flattened. Send Email or Fill in the Feedback Form on this Page to Get Professional Services and Quick Responses from WireMesh.Org Members engaged in Expanded Metal Mesh.
|
Placement Date: |
Nov 18, 2009 |
Expiration Date: |
Nov 18, 2010 |
|
|
|
|
|
|
Company Name: |
Wire Mesh International |
Contact Person: |
guoqing |
City: |
Xinping, Ronghua Street, Hengshui City, Hengbei Province, P. R. |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
Woven Wire Mesh Sieve Test sieve meshes are produced to minimal tolerances using specially designed looms, giving highly precise results for both test and production processes.
Our products are manufactured using high alloyed stainless steels, guaranteeing advanced resistance to corrosion and easy cleaning.
Wire mesh sieves are used in the following industries:
Sieving and fractionating of foundry and form sand Concrete production Production of washing powder Production of foodstuffs Chemical and pharmaceutical processes Research and development
WireMesh.Org members supply wire mesh sieves in all mesh types, sizes and frame materials. In addition to the full range of wire mesh sieves, we also supply top quality stainless steel woven wire and perforated plate test sieves at very competitive prices.
Half-height Wire Sieves: Available in diameters of 100, 200, 300mm and 3, 8 and 12 inches with the complete range of woven wire mesh or perforated plate sieving mediums. Half-height sieves are the same price as full-height sieves.
Perforated Plate Sieves: For aperture sizes 1mm and larger, perforated plate sieves are available in addition to the woven wire series. Commonly perforated metal sieves are supplied in round holes.
Woven Wire Sieves: Occasionally brass woven wire mesh is used in place of stainless steel woven wire mesh. Woven wire mesh is supplied with or without a reinforced backing mesh.
Laboratory Test Sieves: A test sieve is a measuring instrument and should not be maltreated. Sieves should be used with care, cleaned regularly and stored in a safe dry place. Care should be taken when sieving certain chemicals, especially hygroscopic salts, which can affect brass sieves. Always wash and dry the sieves after each test. For the sizing of substances which are liable to corrode brass, we recommend the use of stainless steel sieves. Particles should never be forced through a test sieve - even the gentle brushing of material through the finer meshes is undesirable, but this procedure is occasionally unavoidable for certain materials that are otherwise difficult to sieve.
Metal framed sieves should afterwards be rinsed thoroughly in clean water and dried quickly in a warm atmosphere. (To avoid possible mesh distortion, metal framed woven wire sieves should not be heated above 80 deg C) Sieves that have been used for wet sieving should not be allowed to dry-out before attempting to clean them.
Application: Chemical products Foodstuffs and spices Stones and powders Pharmaceutical products Paper Metal powders Rubber Fertilizers Sugar and salt (sizing) Recycling Many others
Materials: Wire meshes for sieves are produced primarily using stainless steel (AISI 304) or (AISI 316).
Send Email or Fill in the Feedback Form on this Page to Get Professional Services and Quick Responses from WireMesh.Org Members engaged in Wire Mesh Sieves.
|
Business Type: |
Exporter |
Areas of Interest: |
1. General & Leisure Goods/Gaming & Gambling
|
|