|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
Stainless Steel Perforated Sheets |
| Description: |
Perforated Size: From 0,4 mm. to 120 mm.
Sheet Thickness: From 0,4 mm to 12 mm. (depending on perforation)
Size: 2.000 mm. wide in sheets (depending on perforation).
1.500 mm. wide in roll (depending on perforation).
Material: AISI304, 316
Stainless Steel Perforated Metal is used in the manufacture of:
Basket Strainers
Duplex Strainers
Feed Distributors
Hammer Mill Screens
Strainers
Tee Strainers
Temporary Strainers
Trommel Screens
Vibrating Screeners, round and rectangular, & replacement screens and parts
Y-Strainers
Perforated stainless steel sheet is available in any thickness and material that sheet and plate is available in. The rule of thumb is that the hole size cannot be smaller than the material thickness. Open area ranges between about 30% and 40% are most common.
Standard sheet size is 4' x 10'. Other sizes, and with custom borders can be manufactured.
Common hole sizes are 1/32", 1/16", 3/32", 1/8", 3/16", 1/4", 3/8" and 1/2", 3/4" and 1". Other hole sizes can be manufactured. Also available are decorative patterns.
Standard available sheet thicknesses are 20ga, 16ga, 11ga, and 3/16", 1/4", and 3/8". Alternate thicknesses can be manufactured.
Common materials are stainless steel (304 and 316), we also supply mild steel and aluminum perforated sheets.
|
| Placement Date: |
Dec 08, 2010 |
| Expiration Date: |
Dec 08, 2011 |
|
|
|
|
|
|
Company Name: |
Dezhou Perforated Metal Sheet Factory |
| Contact Person: |
zhangkun |
| City: |
dezhou |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
We make perforated metal products out stainless steel, galvanized steel and cold-rolled carbon steel. Perforated sheets can be produced from sheets providing options that include margins and blank areas, along with full perforation. A common way to produce perforated sheets is using coils. This method provides great flexibility in both design and handling. Perforated coils can be produced from coils, as well, which is generally faster than perforating sheets.
Standard perforated metal sheets we supply are size 1000 x2000 mm, thicknesses from 0,3 mm up to 10 mm and perforation from 0,3 mm up to 100 mm. Perforation range: round, square and rectangular holes.
Usually holes diameter can not be lower than thickness. Usually the round holes layout is at 60. Squared and rectangular holes, instead, are aligned.
As professional manufacturers, Dezhou Perforated Metal Sheet Factory is equipped to handle all requirements and is able to provide the most precise and unusual perforating processes.
http://www.perforated-metal.net
|
| Business Type: |
Exporter |
| Areas of Interest: |
1. Machinery & Tools/Machinery
|
|
