|
|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
| Subject: |
Slotted Hole Perforated Sheet |
| Description: |
Slotted perforated metal is produced in ferrous materials in plates, stainless steel or galvanized steel.
Oblong Slotted Perforated Metal:
3.175 x 25.400 mm oblong slot
6.350 mm centers
Side Staggered
43% open
22 gauge steel
Length of oblong slots run length of sheet.
1/4" Slotted Perforated Metal:
6.350 x 38.100 mm slot
Every third bridge 4.763 mm wide
Other bridges 2.381 mm
67% open area of sheets
16, 18, 20 gauge steel
Length of slots runs width of perforated sheet.
|
| Placement Date: |
Nov 07, 2011 |
| Expiration Date: |
Nov 06, 2012 |
|
|
|
|
|
|
Company Name: |
Hengda Perforated Metal Factory |
| Contact Person: |
yangjie |
| City: |
dezhou |
| Country: |
China
 |
| Local Time: |
|
| E-mail: |
Premium
Membership Required (Join Free Today) |
|
| Introduction: |
Hengda is a full service manufacturer of sheet metal via processing of perforating, also expanded metal and fabricated perforated metal products for various uses.
Perforated metal is a kind of sheet metal usually made with styles of perforating, embossing, slotting or checkered plates. The process of creating perforations is called perforating, which involves puncturing the workpiece (usually a thin metal sheet) with a tool. Slotted perforated metal is a sheet or coil of material made from metal that contains holes punched by a die. Embossing is a metal forming process for producing raised or sunken designs or relief in sheet material. Checkered plate, also known as Diamond plate, is a type of light-weight metal sheet with a regular pattern of raised diamonds or lines.
We provide our customers with perforated metal sheets following specifications below:
Material
We can provide the following materials for perforating:
Stainless Steel, Galvanized Steel, Carbon Steel, Aluminum, and all types of metals.
Specification
We can manufacture a wide rang of metal sheets with thickness verifying from 0.35mm to 3 mm and width maximum 1200mm. Length is the overall measurement of the long side of the sheet. Width is the overall measurement of the -short side of the sheet. The standard sheet size is 1000mm*2000mm. and 1000mm*2500mm. The coil width 1000mm is also available. We also can process the special product for your requirement.
The hole shape for perforated metal products:
Round, square, long round, triangle, scale, diamond, oval, hexangular, slot etc.
Sheet Metal Aperture
In general it is advisable to use a hole size larger than the material thickness. The closer the hole size and material thickness come to a 1 to 1 ratio, the more difficult and expensive the process is. Dependent on the material type, smaller hole size to material ratios can be achieved. The minimum diameter we can fabricate is 0.8mm to 4 mm thickness . If you require a die that isn\'t already in our die bank, our experienced tool and die makers can quickly make exactly what you need at a reasonable cost. http://www.perforated-metal.net
|
| Business Type: |
Exporter |
| Areas of Interest: |
1. Raw Materials/Metals
|
|
