|
|
Offer
From Non Premium Member |
|
|
|
Type: |
Sell |
Subject: |
Standard Expanded Metal and Regular Expanded Metal Mesh, Size and Application |
Description: |
Regular Expanded Metal (standard expanded metal) is a finished product as it comes from the press after having been die cut and expanded. Each sheet that comes off the expander is in standard or regular form with the junctions at the strands and bonds forming a ridge surface. Typical applications include safety guards on various pieces of equipment or machinery. The illustration to the right shows that the strands and bonds form a sharp angle to the original plane of the solid sheet. Expanded metal is produced in regular form off the expanders. The strands and bonds are set at a uniform angle to the plane of the sheet. this gives added strength and rigidity, as well as a skid resistant surface. Standard sheets: 1. Camber- The greatest deviation of a side edge from a straight line shall not exceed 3/32 inch per foot (0.8mm per 100mm) of dimension. 2. Taper- Edges shall not deviate from parallel by more than 1/16 inch per foot (0.5mm per 100mm) of dimension, or 1/4 inch (6.4mm) overall, whichever is greater. 3. Squareness- Ends shall not be more than 1/8 inch per foot (1mm per 100mm) out of square or 1/2 inch (12.7mm) overall. 4. Flatness (levelness)- Sheets shall be free from waves or buckles that are in excess of 1-1/2 inch (38.0mm) from a plane surface.
|
Placement Date: |
Apr 27, 2012 |
Expiration Date: |
Apr 27, 2013 |
|
|
|
|
|
|
Company Name: |
Anping Glory Expanded Metal Factory |
Contact Person: |
Linda |
City: |
Anping |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
Glory Expanded Metal Factory is located in Anping, Hebei, China, the Wire Mesh Hometown, a professional manufacturer and supplier of all kinds of expanded metal products. With the numerical control technology and advanced expanded metal machines, we produce various materials, different hole types and wide applications expanded metals.
What we do? Expanded metal is a form of metal stock made by shearing a metal plate in a press, so that the metal stretches, leaving diamond-shaped voids surrounded by interlinked bars of the metal. We can supply the expanded metals as follows:
By materials: Aluminum Expanded Metal; Copper Expanded Metal; Low Carbon Steel Expanded Metal, Stainless Steel Expanded Metal.
By hole types: Hexagonal Expanded Metal, Diamond Expanded Metal, Special Expanded Metal.
By applications: Expanded Metal Fencing, Expanded Metal Gratings, Expanded Metal Sheet, Expanded Angle Bead, Expanded Rib Lath, Decorative Expanded Metal, Expanded Metal Celling, Expanded Metal Walkways And Stair Treads.
|
Business Type: |
Manufacturer |
Areas of Interest: |
1. Building & Construction/Construction
|
|